Lookah 710 Series User Manual V1.0

How to Clean

Step 1: Disassembly

Remove the atomizer and downstem from the device.

[Visual: Device with atomizer and downstem detached.]

Step 2: Cleaning

Clean the components using a cotton bud or brush with isopropyl alcohol.

[Visual: Cotton bud cleaning the atomizer.]

Product Overview

Suitable for 710 Series

[Visual: Exploded view of the Lookah 710 Series device.]

Key Components:

• Glass Mouthpiece
• Indicator LED
• Coil (710 Coil)
• Display Screen
• Battery Charge Indicator
• Mode Indicator
• Detachable Downstem
• Magnetic Flip Cap
• ON/OFF Button
• Type-C Port
• Filter bowl

Note: The coil is a consumable part and requires periodic replacement.

Features

• Replaceable and multiple coil options available.
• Integrated display screen shows battery charge level and voltage settings.
• Three adjustable voltage modes to suit different user preferences.
• Convenient magnetic flip cap for easy access.
• Battery Capacity: 950mAh
• Charging Current: 380mA
• Charging Input Voltage: USB 5V

How to Use

Powering On and Preheating

1. Open the magnetic flip cap and load material into the chamber.
2. Press the power button 5 times within 2 seconds to turn the device on. The battery indicator will flash 3 times, and the device will begin automatic preheating. A countdown (e.g., "9, 8, 7---0") will appear on the screen.
3. Preheating lasts for 10 seconds and can be interrupted by pressing the button once.
4. Upon completion of preheating, the battery light flashes 2 times, indicating the device is ready in the current voltage setting.

Change Voltage

To adjust the voltage, press the power button 2 times within 0.8 seconds. The color sequence for voltage modes is green > blue > white > green.

Voltage Modes:

• Mode 1: Green - 3.2V
• Mode 2: Blue - 3.6V
• Mode 3: White - 4.0V

Manual Mode

• Press and hold the power button to initiate heating (up to 30 seconds). After 30 seconds of continuous heating, the device will stop, the indicator light will flash 5 times, and it will enter standby mode.
• To Turn Off: Press the power button 5 times within 2 seconds. The indicator light will flash 3 times.
• The device features an automatic shut-off function if no operation is detected for 60 minutes.

Caution: Avoid operating the device without material in the coil chamber, as this may damage the coil or the device.

Alarms Indications

• Low Battery Alarm: Display shows "L". The red indicator light flashes 5 times, and the device vibrates. Please charge the device.
• High Temperature Alarm: Display shows "H". The purple indicator light flashes 5 times, and the device vibrates. Allow the device to cool down before further use.
• Short-Circuit Alarm: Display shows "0". The yellow indicator light flashes 8 times, and the device vibrates. Replace the atomizing core.
• Open-Circuit Alarm: Display shows "9". The yellow indicator light flashes 5 times, and the device vibrates. Replace the atomizing core.

Charging

• Charging Status: While charging, the battery LED indicator bars will scroll counterclockwise, and the red LED light will remain illuminated.
• Fully Charged Status: When the battery is fully charged, all battery LED bars will be lit, and the cyan LED light will be illuminated while the USB cable is connected.

Notes

• As this device operates at high temperatures, it is normal for the housing to become moderately warm during use.
• If the device housing becomes too hot to comfortably touch, discontinue use, turn off the device, and allow it to cool down.

Kind Reminder

For optimal understanding and safe operation, please read this manual thoroughly before your first use.

Important Usage Information:

• This product is intended for users aged 21 and over. It is not suitable for pregnant or breastfeeding women, or individuals with or at risk of heart disease, high blood pressure, diabetes, or those taking medication for depression or asthma.
• The device contains a built-in battery. Do not expose the device to extreme temperatures (high heat, cold) or humid environments.
• Keep the device away from water.
• Ensure the device is turned off when not in use.

Warranty

A 30-day warranty is provided from the date of purchase, covering manufacturing defects. This warranty does not extend to damages resulting from improper use. Consumable parts are excluded from the warranty coverage.