Owner's Manual for Intesis models including: INMBSHIS001R000, INMBSHIS001R000 Hisense VRF Systems to Modbus RTU Interface, Hisense VRF Systems to Modbus RTU Interface, VRF Systems to Modbus RTU Interface, Modbus RTU Interface, RTU Interface
Intesis gateway and installa on manual. Moun ng. DIN rail mount (bracket included), Wall mount. Housing Materials. Plas c. Warranty (years). 3 years. Packaging ...
The Hisense-Modbus interface allows full bidirec onal communica on between Hisense VRF systems and Modbus. RTU (RS-485) networks. The interface acts as a ...
Hisense VRF systems to Modbus RTU Interface Item number: INMBSHIS001R000 The Hisense-Modbus interface allows full bidirec onal communica on between Hisense VRF systems and Modbus RTU (RS-485) networks. The interface acts as a server device for the installa on, accessing all signals from the air condi oner unit. A wired remote controller can also be part of the network. Features and benefits Modbus RTU (EIA-485) server device The interface acts as a Modbus server device through its Modbus RTU (EIA-485 connector) port. Energy savings through a window contact func on This func on helps minimize costs, as HVAC systems are a major building energy consumer. AC unit control by both the remote and Modbus RTU The AC unit can be simultaneously controlled by the manufacturer's remote controller and Modbus RTU. Mul ple moun ng op ons Moun ng op ons include DIN rail, wall, or, in some AC models, even inside the indoor unit. Hisense to Modbus - 1 indoor unit Dual configura on op ons Configura on is carried out through the interface's onboard DIP switches and the Modbus interface. Total unit control and monitoring from Modbus RTU Through internal variables, running hours counter (for maintenance purposes), and error indica on. No external power required The interface is powered directly from the AC unit, so no external power supply is required. Page 1 of 4 Hisense VRF systems to Modbus RTU Interface General Net Width (mm) Net Height (mm) Net Depth (mm) Net Weight (g) Packed Width (mm) Packed Height (mm) Packed Depth (mm) Packed Weight (g) Opera ng Temperature °C Min Opera ng Temperature °C Max Storage Temperature °C Min Storage Temperature °C Max Power Consump on (W) Input Voltage (V) Power Connector Configura on Capacity Installa on Condi ons AC Model Compa bility 53 58 93 101 15 8 10 107 -25 60 -40 85 1.54 14 VDC 2-pole ETS 1 Indoor unit. This gateway is designed to be mounted inside an enclosure. If the unit is mounted outside an enclosure, precau ons should always be taken to prevent electrosta c discharge to the unit. When working inside an enclosure (e.g., making adjustments, se ng switches, etc.), typical an -sta c precau ons should always be followed before touching the unit. Hisense VRF systems Page 2 of 4 Hisense VRF systems to Modbus RTU Interface General Content of Delivery Moun ng Housing Materials Warranty (years) Packaging Material Intesis gateway and installa on manual. DIN rail mount (bracket included), Wall mount Plas c 3 years Cardboard Identification and Status Product ID INMBSHIS001R000 Country of Origin Spain HS Code 8517620000 Export Control Classifica on Number (ECCN) EAR99 Physical Features Connectors / Input / Output EIA-485, HVAC port. LED Indicators Gateway and communica on status. DIP & Rotary Switches EIA-485 serial port configura on. Gateway se ngs. Certifications and Standards ETIM Classifica on EC001604 WEEE Category IT and telecommunica ons equipment Page 3 of 4 Hisense VRF systems to Modbus RTU Interface Use Case Page 4 of 4PDFsharp 6.1.1