POCO F7

Guía de inicio rápido

POCO

Device Overview

The POCO F7 features a power button, volume buttons, and a USB Type-C port.

Getting Started

Thank you for choosing the POCO F7. Press and hold the Power button to turn on the device. Follow the on-screen instructions for setup.

For more information, visit: www.mi.com/global/service/userguide

SIM Card Information

Do not insert non-standard SIM cards into the SIM card tray, as this may damage the tray.

WARNING: Do not disassemble this device.

WEEE (Waste Electrical and Electronic Equipment)

This symbol indicates that the product should not be disposed of with other household waste. Recycle responsibly to promote the sustainable reuse of resources. Return used devices through authorized collection systems or contact the place of purchase for safe recycling.

Precautions

Battery Safety:

Risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries according to instructions.
Do not listen at high volumes for prolonged periods to prevent hearing damage.
For safety information, refer to the user manual at: www.mi.com/en/certification

Important Safety Information:

Using unauthorized power adapters or batteries may cause fires, explosions, or other risks. Use only authorized accessories compatible with your device.
The operating temperature range for this device is 0°C~40°C. Using the device outside this range may damage it.
If your device has a built-in battery, do not attempt to replace it yourself.
Charge the device only with the provided cable and power adapter.
Do not charge the device for more than 12 hours.
Batteries should be recycled or disposed of separately from household waste. Improper handling can lead to fire or explosion. Dispose of the device, battery, and accessories according to local regulations.
Do not disassemble, strike, crush, or incinerate the battery. If deformed, stop using it immediately.
Do not short-circuit the battery to prevent overheating or burns.
Do not place the battery in high-temperature environments.
Do not disassemble, strike, or crush the battery to prevent leaks or explosions.
Do not incinerate the battery.
If deformed, stop using the battery immediately.
The battery is not user-replaceable. Removal or repair should only be done by an authorized service center.
Keep your device dry.
Do not attempt to repair the device yourself. Contact customer service or an authorized repair center if any part malfunctions.
Connect other devices according to their manuals.
Do not connect incompatible devices.
The power outlet should be close to the equipment and easily accessible.

Safety Precautions

Observe laws and rules restricting mobile phone use in specific cases and environments.
Do not use your phone in gas stations, explosive atmospheres, or potentially explosive environments. Obey all signs to turn off wireless devices. Turn off your phone in blasting areas or areas published to turn off "two-way radios" or "electronic devices" to avoid interfering with blasting.
Do not use your phone in operating rooms, emergency rooms, or intensive care units. Comply with hospital rules and regulations. Consult your doctor and the device manufacturer to determine if your phone's operation may interfere with your medical device. Maintain a minimum separation of 15cm between the mobile phone and pacemaker. Use the phone on the opposite ear from your pacemaker and do not carry it in a chest pocket. Do not use your phone near hearing aids, cochlear implants, etc.
Observe air safety regulations and turn off your phone on board aircraft when necessary.
When driving, use your phone in accordance with traffic laws and regulations.
To avoid lightning strikes, do not use your phone outdoors during thunderstorms.
Do not use your phone to make calls while charging.
Do not use your phones in humid places, such as bathrooms. This can cause electric shock, injury, fire, and damage to the charger.

Safety Notice

Update your phone's operating system using the built-in software update feature or visit authorized service points. Updating software through other means may damage the device or cause data loss, security issues, and other risks.

EU Regulation

RED Declaration of Conformity

Xiaomi Communications Co., Ltd. declares that this GSM/GPRS/EDGE/UMTS/LTE/5G NR mobile phone with Bluetooth and WiFi 25053PC47G complies with the essential requirements and other relevant provisions of Directive 2014/53/EU. The full text of the EU declaration of conformity can be found at www.mi.com/en/certification.

Radio Frequency (RF) Exposure Information (Specific Absorption Rate, SAR)

This device complies with Specific Absorption Rate (SAR) limits for the general population/uncontrolled exposure (10-gram SAR for head and trunk, limit: 2.0W/kg) as specified in Council Recommendation 1999/519/EC and ICNIRP Guidelines and RED (Directive 2014/53/EU). During SAR testing, this device was configured to transmit at its highest certified power level in all tested frequency bands and placed in positions simulating RF exposure in use against the head with no separation, and near the body with a 5mm separation. SAR compliance for body-worn operation is based on a separation distance of 5mm between the human body and the unit. To ensure the radiofrequency exposure level is equal to or below the indicated level, keep this device at a minimum distance of 5mm from the body. Belt clips or holsters that do not contain metal components are recommended to maintain a 5mm separation between this device and the body and to facilitate its normal operation. The safety of RF exposure from any metal-containing body accessory has not been verified or certified, so the use of such an accessory should be avoided.

Legal Information

This device may be operated in all EU member states. Observe local and national regulations where the device is used. This device is restricted for indoor use only when operating in the 5250 to 5350MHz frequency range in: AT, BE, BG, HR, CY, CZ, DK, EE, FI, FR, DE, EL, HU, IE, IT, LV, LT, LU, MT, NL, PL, PT, RO, SK, SI, ES, SE, UK(NI), IS, LI, NO, CH, TR.

Wi-Fi connectivity (including Wi-Fi frequency bands, Wi-Fi standards, and other functions ratified in the IEEE 802.11 standard specifications) may vary depending on regional availability and local network compatibility. The function may be added via OTA when and where applicable.

Ensure that the power adapters used comply with the applicable country regulations and international and regional safety standards.

Frequency Bands and Power

This mobile phone offers the following frequency bands in EU areas and maximum radio frequency power:

GSM 850: 34.0dBm
GSM 900: 35.5dBm
GSM 1800: 32.5dBm
GSM 1900: 30.5dBm
WCDMA Band 1/8: 25.7dBm
LTE Band 1/3/7/8/20/28/38/40/41: 25.7dBm, LTE Band 42: 26dBm
5G NR Band n1/n3/n7/n8/n20/n28/n38/n40/n41: 26dBm, 5G NR Band n77/n78: 29dBm
Bluetooth: 20dBm
2.4GHz Wi-Fi band: 20dBm
5GHz Wi-Fi: 5150MHz to 5250MHz 23dBm / 5250MHz to 5350MHz 23dBm / 5470MHz to 5725MHz 23dBm / 5725MHz to 5850MHz 14dBm
NFC: 13.56MHz < 42dBuA/m at 10m

5G connection depends on the country, operator, and user environment.

FCC Regulation

This phone complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This phone has been tested and complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Therefore, there is no guarantee that interference will not occur in a particular installation if this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment on or off, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet or circuit different from that to which the receiver is connected.
Consult a dealer or an experienced radio/TV technician for help.

RF Exposure Information (SAR)

This device complies with government requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for radiofrequency (RF) energy exposure. The standard exposure for wireless devices employs a unit of measurement known as the specific absorption rate, or SAR. The FCC-imposed SAR limit is 1.6W/kg.

For body-worn portable operation, this device has been tested and complies with FCC RF exposure guidelines for use with an accessory that contains no metal and is positioned at a minimum of 1.5cm from the body. The safety of RF exposure from any metal-containing body accessory has not been verified or certified, so the use of such an accessory should be avoided. The accessory is available in the market and should be used to maintain a 1.5cm distance between the EUT device and the body.

FCC Note

Changes or modifications not expressly approved by the party responsible for compliance may void the user's authority to operate the equipment. Shielded cables are necessary to comply with Class B FCC limits.

Electronic Label

This device has an electronic label for certification information. Update your operating system to the latest version to access the IFT logo and ID. To access, select Settings > About phone > Certification or select Settings and type "Certification" in the search bar.

Certification Information (Highest SAR)

SAR Limit 10g: 2.0W/kg
SAR: Head: 0.995W/kg Body: 0.998W/kg (5mm distance)
SAR Limit 1g: 1.6W/kg SAR Value: Head: 1.09W/kg
Portable in body: 0.91W/kg (15mm distance)
Hotspot: 0.97W/kg (10mm distance)

Model: 25053PC47G

2505 indicates that the product launch will be after 202505.

NOM

OPERATION OF THIS DEVICE IS SUBJECT TO THE FOLLOWING CONDITIONS:

a) This equipment or device may not cause harmful interference.
b) This equipment or device must accept any interference received, including interference that may cause undesired operation.

CONNECTION INSTRUCTIONS

To connect your mobile phone to the electrical power and recharge the internal battery, use only your provided battery charger.
Connect the USB cable to the phone's USB port.
Connect the USB cable to the battery charger's USB port.
Connect the charger to a mains power socket (100V-240V~).
To disconnect the charger when the battery is recharged, firmly hold the charger and pull it from the mains socket; never pull the cable.

IMEI Location

The IMEI is located on a label attached to the back of your device and on the label attached to the box. To get the IMEI of your device, tap the "phone" icon and dial *#06# or consult it in "Settings"/"About phone"/"All specifications"/"Status"/"IMEI".

Geographic Location of the Mobile Phone

To geolocate your mobile phone, it is necessary that the device has the following configurations activated:

A Mi account or a Google account linked and active on the device.
Internet connection via mobile data and/or WiFi.
The "Location" functionality active.

Location via Mi Account

To locate the mobile phone online via the Mi account, go to the following site and log in with the Mi account linked to the mobile phone: https://i.mi.com/?_locale=es_US. Once logged in, you can check your device's location.

Location via Google Account

To locate the mobile phone online via the Google account, go to the following site and log in with the Google account linked to the mobile phone: https://myaccount.google.com/find-your-phone. Once logged in, you can check your device's geographical location.

Phone Content Protection

To protect your phone's content, you can use the following screen lock functionalities:

Lock pattern
PIN
Password
Fingerprint
Facial unlock

To access and configure these options, go to: "Settings" /"Passwords & security", in this menu you can choose your preferred screen lock method.

Power

Power Input: 5Vcc 3A / 3.6Vcc to 5Vcc 3A / 5Vcc to 20Vcc 6.1Vcc to 4.5A (90W MAX)
Adapter: Input: 100 V-240 Vca 50 Hz/ 60 Hz 2.0 A
Output: 5Vcc 3A / 3.6Vcc to 5Vcc 3A / 5Vcc to 20Vcc 6.1Vcc to 4.5A (90W MAX)
Uses 1 rechargeable Lithium-ion Polymer battery of 3.93Vcc 6 330mAh/6500mAh 24.88Wh/25.55Wh

Cell Broadcast (CBS) is a function that offers SMS decoding, supports geofencing for emergency and non-emergency wireless alerts, and provides information to end-users based on regional and mobile carrier regulations. This device supports the CBS function and complies with Part 3 of the IFT-011-2022 standard. To access the CBS configuration menu, go to Settings > Security & emergency > Wireless emergency alerts, and select the "enabled" or "disabled" options to receive or not receive the corresponding alerts.

Legal Notice

This user guide is published by Xiaomi or its local affiliate. Xiaomi may make improvements or changes related to typographical errors or inaccurate current information to this user guide, or improvements to programs or equipment, without prior notice and at any time. Such changes will be incorporated into new online editions of this user guide (see more details at www.mi.com/global/service/userguide). All images are for reference only and may not accurately represent the actual device.

Importer:

XIAOMI SOFTWARE DE MEXICO, S. de R.L. de C.V.
R.F.C. XSM2107156A3
BLVD. LAGO ZURICH 219, PISO 9 902 Y 903,
AMPLIACION GRANADA, MIGUEL HIDALGO,
CIUDAD DE MEXICO, C.P. 11529.

Manufacturer:

Xiaomi Communications Co., Ltd.
Postal address of the manufacturer: #019, 9th Floor, Building 6,
33 Xi'erqi Middle Road, Haidian District, Beijing, China, 100085

Mobile Phone

Brand: POCO