Philips 8000 Series Vacuum Cleaner

Product Overview and Accessories

The Philips 8000 Series vacuum cleaner includes the main unit, hose, wand, and various attachments.

Included Components:

• Main vacuum unit
• Hose and telescopic wand
• Floorheads:
• Standard floorhead (XD8142)
• TriActive+ LED floorhead with brush roll (XD8152) for carpets and hard floors
• Crevice tool
• Brush tool
• Accessories: 1x XD8122 attachment, 4x AA Batteries (for remote/accessory)

Getting Started and Assembly

Follow these steps to assemble and set up your vacuum cleaner:

1. Connect the hose securely to the vacuum unit.
2. Attach the telescopic wand to the hose.
3. Attach the selected floorhead to the end of the wand.
4. Plug the power cord into a wall socket.
5. Turn the vacuum cleaner on using the power button [▶️].
6. Adjust suction power as needed using the controls [---- to ++++].
7. After use, turn off the vacuum cleaner.
8. Unplug the power cord from the wall socket.
9. Store the vacuum cleaner, hose, and wand neatly.

Usage and Maintenance

Battery Replacement:

If your vacuum has a remote control or accessory requiring batteries:

1. Open the battery compartment.
2. Insert 3x 1.5V AA batteries, observing polarity.
3. Close the battery compartment.

Important: Do not use the vacuum if the power cord or floorhead is damaged [⚠️].

Bag Replacement (for Bagged Models):

Replace the dust bag when indicated or when full.

1. Open the dust bag compartment.
2. Remove the old dust bag.
3. Insert a new compatible bag (e.g., FC8021, FC8022, FC8027).
4. Securely close the compartment.

Filter Maintenance:

Regular filter maintenance ensures optimal performance.

Pre-motor Filter Cleaning/Replacement:

1. Open the filter cover.
2. Remove the pre-motor filter.
3. Clean the filter by rinsing it under water and allowing it to dry completely (at least 24 hours).
4. Insert the clean, dry filter.
5. Replace the filter cover.

Exhaust Filter (HEPA) Replacement:

Replace the exhaust filter periodically (e.g., every 12 months) [? 12M].

1. Open the exhaust filter compartment.
2. Remove the old exhaust filter (e.g., CP9260).
3. Insert the new exhaust filter.
4. Close the compartment.

Motor Filter Replacement:

Replace the motor filter periodically (e.g., every 12 months) [? 12M].

1. Open the motor filter compartment.
2. Remove the old motor filter (e.g., FC8038).
3. Insert the new motor filter.
4. Close the compartment.

Brush Roll Cleaning:

For models XD8142 and XD8152, clean the brush roll to remove tangled hair and debris.

1. Remove the floorhead from the wand.
2. Turn the floorhead upside down.
3. Use scissors [✂️] or a suitable tool to cut away tangled hair and fibers.
4. Remove any accumulated debris.
5. Reattach the floorhead to the wand.

Additional Information

For more details, visit the Philips website:

www.philips.com [?]

This product is made with 100% recycled paper [♻️].