Mipodz i18 Wireless Stereo Headset

Specifications

Product Instructions

Operation Steps (Bilateral Use)

Open the top cover of the charging box and press the multi-function key of the charging box to turn on. Take out the headphones. The headphones automatically turn on - the indicator lights flash alternately red and blue in the main ear and blue in the secondary ear once in 5 seconds.

Headphone Pairing with Mobile Phone

The red and blue alternating flashing in the headphone's main ear indicates that it needs to be paired with Bluetooth. Open the mobile phone settings, open Bluetooth, search for the Bluetooth name "Mipodz i18" and click on the mobile phone connection.

Switching On and Off of Charger Earphone

Earphone: Long press multi-function key for 3 seconds to turn on (blue light flash). Long press multi-function key for 4 seconds to turn off (red light). Place the headphone into the charging bin to turn off automatically. It will also turn off automatically after 3 minutes when disconnected.

Charging bin: Press the multi-function key to turn on (green light is always on). Press the multi-function key to turn off (green light is off).

Charging Indication

When the charging bin is charged, the red light is always on, and the indicator lights go out when it is full.

When the charging bin charges the headphones, the green light on the charging bin is always on, and the red light on the headphones is always on. Once fully charged, both indicator lights will turn off.

Product Schematic Diagram

MIC

Charge

Touch

Control Functions

• The last song: Double click right ear
• The next song: Double click left ear
• Play/Pause: Single click normal
• Answer the phone: Click the button when calling
• Refusing the phone: Press 2 seconds button for calling time
• Siri function: Press 3 seconds long

Matching

Hold the switch for 3 seconds at the same time with both hands until the red and blue lights flicker alternately and release. Double-click any headset multi-function key, and the machine matches successfully.

Indicator: Double-click multi-function keys on one side to show red and blue lights alternately, and the other side shows blue lights once for 5 seconds.

Precautions

1. The earphones should be stored in a dry and ventilated environment, to avoid oil, water, moisture, and dust affecting product performance.
2. Avoid using stimulus, organic solvents, or items containing these ingredients to clean the earphone.
3. The use of earphones should be correctly as per the specification. Pay attention to the influence of the environment on the earphones. In order to ensure a smooth connection, it is recommended that the distance between the earphone and phone be within 10 metres.
4. If the earphones failed to connect or have a poor connection, please do not disassemble the earphones or the accessories on your own. This will void the warranty.
5. Regarding charging earphones: Please use the standard USB cable or the pointed charging cable from the company to charge the earphones.
6. In order to ensure normal use, please ensure sufficient power of earphones.

Compliance Information

Made in China

FCC ID: 2AYTF-418

IC: 26927-418

FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

IC Statement: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.