User Manual for DIGIRUSS models including: DW960R, NX-960-H02, DW960R True Diversity Wireless Microphone, DW960R, True Diversity Wireless Microphone, Diversity Wireless Microphone, Wireless Microphone, Microphone
4 days ago — USER MANUAL. WIRELESS MICROPHONE. DW960R. Page 2. Page 3. Page 4. 520.000. 558.800. 520.000. 559.800. Antenna:4pcs. Microphone:2pcs. (Handheld/Lapel/Headset/ ...
UHF TRUE DIVERSITY WIRELESS MICROPHONE
DW960R
WIRELESS MICROPHONE
USER MANUAL
UHF Wireless Microphone
520.000
559.800
520.000
559.800
520.000
558.800
Antenna:4pcs
Microphone:2pcs
6.35 Audio Cable: 1pcs
(Handheld/Lapel/Headset/Desktop optional)
Frequency Matching
3.2 Aim the transmitter IR window to the receiver IR window. (The lapel and the headset body pack need to open the transmitter battery compartment,the conference unit IR window is located on the rear panel) Operation as below picture:
Automatic Frequency Matching
520.000
558.000
PROFESSIONAL WIRELESS CONFERENCE MIC
Frequency Range:520.000-559.800MHz Channel A: 520.000-539.800MHz (100 Channels) Channel B: 540.000-559.800MHz (100 Channels) Number of Channels: 200 Channels Frequency step: 200KHz Modulation Type: FM Brake Bias:45KHz Frequency Error:<10PPM Dynamic Range: >110dB Frequency Response: 60Hz-18KHz S/N Ratio: >105dB Distortion: <0.5% Operating Temperature :-18°C~+50°C Visual Receiving Distance: 100 Meters
Receiver specification:
Oscillation mode: PLL Phase Locked Loop Antenna interface: TNC Connector Receiving Sensitivity:-100dBm(40dB S/N) Spurious Suppression:>80dB Audio Output:+4dB(1.25V) /5KQ Balanced :+10dB(1.5V)/600Q Frequency Error:<10PPM Supply Voltage: DC12V Supply Current: 450mA Power consumption: 5mW
520.000
558.000
3. Frequency Lock 1)Press 4 times "set" key to enter lock setting; 2)Press " " to lock the frequency or press " " to unlock the frequency; 3)Press " set " to confirm.
520.000
4.Sensitivity setting Press the "set" key 3 times to enter MIC sensitivity setting,then press the "" and "" key to select the MIC sensitivity level. There are 3 levels for different application ("-95"/"-85"/"-75" )
5.Frequency setting Press the "sync" key,you can see the IR light is flashing. Then face the transmitter IR window to the receiver IR window. When the LCD show the frequency, then frequency matching is successfully.
520.000
Function Instructions
1.Automatic frequency sweep 1)Press '''set'' key 2 times (show as chart 1),then press the "" key , then the host will search the clean frequency point automatically(chat 2). 2)When the LCD show as chat 3 and the IR window is flashing,face the transmitter IR window to the host window.When the LCD show the frequency(show as chart 4),frequency matching sccessful.
Chart 1
Chart 2
Scanning clean frequency
Chart 3
520.000
Chart 4
2. Channel setting 1)Press the "set" key into the channel adjustment interface. 2)Press the "" and "" key to switch the channel, 3)then press "set" to confirm,face the transmitter IR window to the host window.When the LCD show the frequency,frequency matching sccessful.
CH 58
520.000
LCD display Power button
Switch on Long press the power button about 3 seconds, when the LCD sereen will display the current channel, power consumption(as shown)
Switch off Long press the power button for 3 seconds, the LCD screen will display OFF, Then display will be turn off
Conference Microphone
1. Conference Mic Instruction 1.1 Panel Instrcution
Microphone Head Microphone Luminous ring Microphone Rob Microphone Status Window Volume Adjustment Button Power Switch Volume Adjustment Button
Oscillation mode: PLL Phase Locked Loop
Transmitter Power: 1.6mW (Handheld Microphone) Frequency Error:<10PPM Supply voltage :1.5Vx2 Battery
2.Dispaly Instruction
Mute status display
Display AF output specification Channel frequency
Battery level Microphone status
520.000
3.Operation Instruction
1)Turn on the transmitter by long press ON/OFF button. The same operation to turn off the transmitter.
2)Conference transmitter prevents RF interference, especially for mobile phone interference effect is obvious.
Corel PDF Engine Version 18.0.0.448 CorelDRAW X8