ATTACK SHARK V5 Lightweight Mouse

Product Introduction

• Product model: V5
• Product interface type: USB-Type-C
• Product connection method: USB, 2.4G, Bluetooth
• Product optical sensor: Pixar PAW3950 MAX
• Product main control chip: Nordic 52840
• Transmission frequency: 2402MHz-2480MHz
• Report rate (HZ):
  • Wired: 125/250/500/1000Hz default (driver adjustable)
  • 2.4G: 125/250/500/1000Hz default/2000/4000/8000Hz (driver adjustable)
  • Bluetooth: 250Hz (non-adjustable)
• Frame rate (IPS): 750IPS
• Maximum acceleration (G): 60G
• DPI value and corresponding color: 1200 (red) - 2400 (green) - 3200 (blue) - 5600 (yellow) - 8000 (cyan) - 42000 (purple)
• Charging current: ≈230mA
• Charging voltage: 4.25v-5.25v
• Battery capacity: 500mAh polymer battery
• Product weight: 53g±3g
• Product size: 121*64.5*38mm
• Data line interface (length): Type-C/1.6 meters
• Wireless transmission distance: 10 meters
• Switch brand and service life: Omron 100 million times
• Encoding switch: Fengshi Weiqi 2 million times
• Support operating systems: XP, Win7, Win8, Win10, Win11, Mac OS, Android, Linux, etc.

Key Function Description

The mouse features the following buttons and indicators:

• 1: Left button
• 2: Right button
• 3: Middle button
• 4: Forward key
• 5: Back key
• 6: DPI indicator light - indicates charging status, low voltage, or full battery.
• 7: DPI cycle indicator - shows current DPI level with color: 1200 (red), 2400 (green), 3200 (blue), 5600 (yellow), 8000 (cyan), 42000 (purple).
• 8: Mode/pairing indicator light - Red for 2.4G mode, Blue for Bluetooth mode. Flashes quickly when pairing.
• 9: Power switch - Positions: 2.4G, OFF, Bluetooth.
• 10: Type-C interface - for wired connection and charging.

Tips

Sleep Mode

The mouse enters sleep mode to conserve power. This is adjustable within the driver from 10 seconds to 40 minutes.

• The mouse enters sleep mode level 1 if there is no operation for 1 minute.
• The mouse enters sleep mode level 2 if there is no operation for 10 minutes.

Sleep Wake-up Method

Wake up the mouse by pressing any button or moving it.

Connection Modes

Bluetooth Connection Method

Ensure the power switch is set to the Bluetooth mode [Bluetooth-symbol]. The Bluetooth mode light will flash blue quickly.

1. On your mobile phone or other device, turn on Bluetooth and search for available devices.
2. When "V5 Mouse" appears, select it to connect.
3. After successful connection, the indicator light will be blue for about 1 second and then turn off.

2.4G Connection Method

To use the 2.4G mode [USB-symbol], turn the power switch to the 2.4G position.

1. Take out the 2.4G receiver from the mouse and plug it into an idle USB port on your computer.
2. The computer will automatically install the necessary configuration software. Once installation is complete, the mouse can be used.
3. If the computer does not respond, try a different USB port. The computer will typically prompt that installation is complete and the mouse is ready for use.

2.4G Forced Pairing Method

If the 2.4G signal experiences interference or is lost, follow these steps:

1. Ensure the power switch is set to 2.4G.
2. Press and hold the Left button + Right button + Middle button for approximately three seconds. The pairing mode light will flash red quickly.
3. Plug the 2.4G receiver into the computer.
4. After successful pairing, the mode light will turn solid red for about one second before turning off.

2.4G Receiver LED Indicator Description

The mouse report rate is indicated by different colors when connected via the receiver:

• Red: 125Hz
• Blue: 250Hz
• Yellow: 500Hz
• Orange: 1000Hz
• Purple: 2000Hz
• Green: 4000Hz
• Cyan: 8000Hz

Battery status is indicated by color:

• Green: 100% charged
• Yellow: 66% charged
• Orange: 33% charged
• Red: 0% charged (flashes red when battery is low)

Wired Mode Connection Method

Use the provided Type-C cable [Type-C-symbol] to connect the mouse to your computer.

When the cable is plugged in, the mouse defaults to wired mode and begins charging. You can then move the mouse to control the computer screen pointer.

Precautions

• ⚠️ Do not soak the mouse in liquid or sprinkle liquid on it.
• ⚠️ Do not use the mouse in high temperature and high humidity environments.
• ⚠️ Do not place the mouse near open flames.
• ⚠️ Do not violently smash or drop the mouse.
• ⚠️ Do not disassemble the mouse.
• ⚠️ Do not charge the mouse with a fast charging adapter.

Packing List

• ATTACK SHARK V5 Mouse × 1
• 2.4G Receiver × 1
• Instruction Manual × 1
• Anti-slip Sticker × 1
• Type-C Cable × 1

FCC Caution

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.