ZZYJX FTBFBF-6043 Bed Frame Assembly Instructions

Parts List

• 1: Headboard (1 pc)
• 2: Side Rail (2 pcs)
• 3: Footboard (1 pc)
• 4: Support Leg (2 pcs)
• 5: Bed Slat (10 pcs)
• 6: Support Bar (2 pcs)
• 7: Support Bar (2 pcs)
• 8: Bed Slat (10 pcs)
• 9: Support Feet (20 pcs + 2 spare)

Hardware List

• A: M8x50mm Bolt (4 pcs + 1 spare)
• B: M6x40mm Bolt (8 pcs + 1 spare)
• C: M6x30mm Bolt (4 pcs + 1 spare)
• D: M6x28mm Bolt (4 pcs + 1 spare)
• F: M6x12mm Bolt (4 pcs + 1 spare)
• G: M6x12mm Bolt (4 pcs + 1 spare)
• H: M6x12mm Bolt (8 pcs + 1 spare)
• I: M6x12mm Bolt (2 pcs)
• J: M6x12mm Bolt (2 pcs)
• K: M6x12mm Bolt (2 pcs)
• N: Silicone Tape (1 pc)

Assembly Steps

1. Step 1: Attach Side Rails to Headboard
   Attach the side rails (2) to the headboard (1) using bolts F (4 pcs). Refer to diagrams 1-1, 1-2, and 1-3 for detailed attachment points.
2. Step 2: Assemble Support Legs
   Assemble the support legs (4) as shown in diagram 2. You will need two sets of these.
3. Step 3: Attach Support Legs to Headboard and Footboard
   Attach the assembled support legs (4) to the headboard (1) and footboard (3) using bolts A (4 pcs) and D (4 pcs). Also, attach support bars (4) using bolts G (4 pcs) and H (8 pcs). Refer to diagram 3 for placement.
4. Step 4: Attach Side Rails to Footboard
   Attach the side rails (6) to the footboard (3) using bolts B (4 pcs). Ensure the side rails are correctly positioned as shown in diagram 4.
5. Step 5: Attach Support Legs to Side Rails
   Attach the remaining support legs (5) to the side rails using bolts B (2 pcs). Refer to diagram 5.
6. Step 6: Install Bed Slats and Support
   Place the bed slats (5) onto the side rails. Secure the slats using bolts B (2 pcs). Apply the silicone tape (N) to the slats as indicated in diagram 6 to prevent friction noise.
7. Step 7: Attach Center Support Bars
   Attach the center support bars (7) using bolts C (4 pcs). Refer to diagram 7.
8. Step 8: Attach Additional Bed Slats
   Attach the remaining bed slats (8) using support feet (9). There are 10 slats and 20 support feet. Refer to diagram 8.
9. Step 9: Final Touches
   Apply silicone tape to the gap between bed beams as shown in diagram 9. Apply glow-in-the-dark paste to the foot of the bed as indicated.
10. Step 10: Completion
    Your ZZYJX FTBFBF-6043 bed frame is now assembled.