Advanced Diagnostic Tools for optical encodersRenishaw: Contact us
User Guide for RENISHAW models including: M-6195-9321-03-A Advanced Diagnostic Tool, M-6195-9321-03-A, Advanced Diagnostic Tool
Feb 13, 2021 — RENISHAW HAS MADE CONSIDERABLE EFFORTS TO ENSURE THE CONTENT OF THIS DOCUMENT IS CORRECT AT THE DATE OF PUBLICATION BUT MAKES NO WARRANTIES OR ...
VIONiC⢠downloads
File Info : application/pdf, 2 Pages, 690.74KB
DocumentDocumentM-6195-9321-03-A Advanced Diagnostic Tool ADTi-100 and ADT View software Quick-start guide 1 System compatibility QUANTiCTM VIONiCTM ATOM DXTM 2 System requirements PC, laptop or tablet with administration rights* USB 1.1 A to mini B cable, A-9572-0098 ADT View software www.renishaw.com/adt ADTi-100 Adaptor cables for readheads with alternative pin-outs QUANTiC analogue output only: · Termination tool (120 ohms), A-6195-2132 · Adaptor cables, A-6637-1540 (pair of 15-way D-type male to female cables) 3 System connection Tethered The ADTi-100 is connected to the readhead and powered via the PC's USB port. QUANTiC (digital output), VIONiC and ATOM DX: In-line The ADTi-100 is connected between the readhead and the controller as part of the control loop. QUANTiC (digital output), VIONiC and ATOM DX: Readhead Readhead To controller QUANTiC (analogue output): To PC USB port QUANTiC (analogue output): To PC USB port Readhead Adaptor cable Termination tool Readhead Adaptor cable Adaptor cable To controller To PC USB port To PC USB port * Minimum requirements: · Windows® operating systems (×86 or ×64): 7 SP1, 10 · Quad-core 1.44-1.92 GHz processor · 2 GB DDR3 RAM · 5 GB disk space (including 2.5 GB for.NET) · 500 MHz GPU capable of 1024 × 600 resolution or higher Connections are shown for standard 15-way D-type pin-out. For readheads with alternative pin-outs or connectors adaptor cables are required. Contact your local Renishaw representative for more information. 4 Software operation Connect the ADT Select chosen system QUANTiC analogue variant only: Termination reminder Connected ADT Select another ADT Connected readhead Signal amplitude Switch between linear or rotary scale Screen selection Signal strength vs. position along axis Reference mark and limit* positions Max and min signal strength position Pitch* and calibration indicator Settings Internal sine and cosine signals displayed as a Lissajous Figure Reference mark phasing Readhead velocity vs. time Zoom, pan and cursor features Configuration of the readhead Restore factory defaults * Pitch and limits are not available with some readheads Initiate system calibration Switch AGC on /off Status of limits* Alarms / warnings and open log file Linear or rotary Digital Read Out (DRO) For worldwide contact details, visit www.renishaw.com/contact RENISHAW HAS MADE CONSIDERABLE EFFORTS TO ENSURE THE CONTENT OF THIS DOCUMENT IS CORRECT AT THE DATE OF PUBLICATION BUT MAKES NO WARRANTIES OR REPRESENTATIONS REGARDING THE CONTENT. RENISHAW EXCLUDES LIABILITY, HOWSOEVER ARISING, FOR ANY INACCURACIES IN THIS DOCUMENT. © 2016 - 2021 Renishaw plc. All rights reserved. Renishaw reserves the right to change specifications without notice. RENISHAW and the probe symbol used in the RENISHAW logo are registered trade marks of Renishaw plc in the United Kingdom and other countries. apply innovation and names and designations of other Renishaw products and technologies are trade marks of Renishaw plc or its subsidiaries. All other brand names and product names used in this document are trade names, trade marks or registered trade marks of their respective owners.