Hotpoint Washer Dryer Quick Guide

Introduction

Thank you for purchasing a Hotpoint product. Register your appliance for more comprehensive assistance at www.hotpoint.eu/register.

Before using the appliance, carefully read the Health and Safety guide. Ensure transport bolts are removed as per the Installation Guide.

Control Panel

The control panel features the following buttons and controls:

• 1. ON/OFF button [ON/OFF]
• 2. DRYING button [DRYING]
• 3. DRYING ONLY button [DRYING ONLY]
• 4. MULTI RINSE button [MULTI RINSE]
• 5. OPTION button [OPTION]
• 6. DIRECT INJECTION button [DIRECT INJECTION]
• 7. START/PAUSE button and indicator light [START/PAUSE]
• 8. KEY LOCK button [KEY LOCK]
• 9. DELAY TIMER button [DELAY TIMER]
• 10. SPIN button [SPIN]
• 11. TEMPERATURE button [TEMPERATURE]
• 12. AUTO CLEAN button [AUTO CLEAN]
• 13. WASH CYCLE SELECTOR KNOB [WASH CYCLE SELECTOR]

The DISPLAY shows program status, time remaining, and selected options.

Wash Cycle Table

Maximum load: 9 kg. Power input: 0.5 W (off mode) / 8 W (left-on mode).

Notes:

• Cycle duration is an estimate and may vary.
• Eco 40-60 (1) is the EU Ecodesign test cycle for normally soiled cotton laundry.
• Eco 40-60 (4) is the EU Ecodesign test cycle for washing and drying normally soiled cotton laundry.
• (*) Spin speed values on display may differ slightly.
• (***) After programme end and spinning with maximum selectable spin speed.
• (****) For wash+dry programs, a 45' cycle for 1kg laundry is run.

Product Description

Key components of the washer dryer:

• 1. Top
• 2. Detergent dispenser drawer
• 3. Control panel
• 4. Handle
• 5. Porthole door
• 6. Drain pump (behind the plinth)
• 7. Plinth (removable)
• 8. Adjustable feet (2)

Detergent Dispenser Drawer

Compartment *: Do not insert detergent here.

Compartment 1: Washing detergent (powder or liquid). Use partition A for liquid, slot B for powder.

Compartment 2: Additives (fabric softeners, etc.). Do not exceed the "MAX" level.

Use powder detergent for white cotton, pre-washing, and temperatures over 60°C. Follow detergent packaging instructions.

Wash Cycle Descriptions

Follow garment care labels for maximum recommended washing temperature.

• Anti-Stain Turbo: Ideal for daily stains on mixed and coloured garments (45 min).
• Anti-Stain 20°C: Maximum stain removal at low temperatures, preserving fabrics and colours.
• Cotton: For resistant linen and cotton, moderately to heavily soiled (towels, underwear, tablecloths).
• Synthetics: For synthetic items. Temperature can be increased to 60°C and powder detergent used if dirt is difficult to remove.
• Rapid 30': For lightly soiled garments, quick wash (not for wool, silk, or hand-wash items).
• Mix Wash & Dry: Washes and dries mixed cotton and synthetics loads up to 3.5 kg. Steam reduces creases. Use liquid detergent.
• Shirts Wash & Dry: Washes and dries shirts and T-shirts (various fabrics) up to 2 kg. Steam reduces creases. Use liquid detergent and pre-treat stains.
• Wool (Woolmark Apparel Care - Green): Approved by The Woolmark Company for "hand wash" wool garments.
• Eco 40-60: Standard cotton program, most efficient for normally soiled cotton laundry washable at 40°C or 60°C.
• 20°C: For lightly soiled cotton garments at 20°C.
• White: For heavily soiled whites and resistant colours.
• Anti Allergy: Removes major allergens like pollen, mites, and pet hair.
• Steam Refresh: Refreshes garments, neutralizes odours, and relaxes fibres with steam. Garments will be damp.
• Ultradelicates: For very delicate garments. Turn inside out. Use liquid detergent.
• Rinse&Spin: For rinsing and spinning.
• Spin&Drain: For spinning and draining water.

Display and Controls Explanation

The display provides information on the program, phases, and time remaining.

Display Areas:

• Area A: Shows icon, program selected, washing/drying phases, and time remaining.
• Area B: Shows DIRECT INJECTION intensity levels.
• Area C: Indicator lights for available functions.
• Area D: Time remaining for DELAY TIMER.
• Area E: Maximum available spin speed (or "--" if not applicable).
• Area F: Selectable temperature (or "--" if not applicable).

Initial Setup: On first use, select language by pressing [X] and [Y] buttons, confirm with [Z]. To change language, switch off and press [G], [H], [I] simultaneously. To change display luminosity, switch off and press [G], [L], [M] simultaneously.

Screen Saver: Activates after 1 minute of inactivity. Press any button to return.

LOCKED DOOR INDICATOR: Symbol indicates the door is locked. Wait for it to turn off before opening. Press [START/PAUSE] to open during a cycle if the symbol is off.

Daily Use

1. Press [ON/OFF]. "HOTPOINT" appears, [START/PAUSE] light flashes.
2. Open door, load laundry (do not exceed max load).
3. Pull out detergent drawer, add detergent/additives.
4. Close door.
5. Use [WASH CYCLE SELECTOR] to choose a cycle. Temperature and spin speed can be modified (reduced, not increased).
6. Select desired options.
7. Press [START/PAUSE] to start. [START/PAUSE] light becomes steady green, door locks.

Pausing and Changing Cycles

• Pausing: Press [START/PAUSE]. Light flashes amber. Press again to resume.
• Changing: Pause the cycle, select a new cycle, press [START/PAUSE] again.
• Cancelling: Press and hold [ON/OFF] to stop the cycle and switch off the machine.

End of Wash Cycle

"CYCLE END" is displayed. When the door lock symbol turns off, open the door and switch off the machine. The machine switches off automatically after ~10 minutes. Close the water tap and unload laundry. Leave the door ajar to dry the drum.

Options

• Steam Hygiene: Enhances washing with steam to remove bacteria.
• Delay Timer: Set a delayed start. Press button until desired delay is shown, or until "-- h" to remove.
• Temperature: Modify temperature for selected cycle.
• Spin: Modify spin speed for selected cycle.
• Direct Injection: Pre-mixes water and detergent for effective cleaning at low temperatures, preserving colours and fabrics. Modes: "Power" and "Energy Saver".
• Drying: Set drying type (Iron, Hanger, Cupboard, Extra) or time (30-180 min). Press button until "OFF" to exclude drying. For loads exceeding max drying capacity, dry in batches. A cooling-down period is added to all drying cycles.
• Drying only: Perform a drying-only cycle. Select cycle, exclude wash phase, set drying level/time.
• Multi Rinse: Adds extra rinses (Extra +1, +2, +3) to remove detergent traces, beneficial for sensitive skin and allergen removal.
• KEY LOCK: Press and hold [KEY LOCK] for 2 seconds to activate/deactivate. Prevents accidental changes.

Tips and Suggestions

• Sort Laundry: By fabric type, colour, and delicates (use a fabric bag for small items or those with hooks).
• Empty Pockets: Remove coins, lighters, etc., to prevent damage.
• Detergent Dosage: Follow recommendations for optimal cleaning and to avoid residue.
• Low Temperature/Longer Duration: Most energy-efficient programs.
• Observe Load Sizes: Wash up to the indicated capacity to save water and energy.
• Noise & Moisture: Influenced by spin speed; higher speed means more noise but less moisture.

Care and Maintenance

• Switch off and unplug before cleaning. Do not use flammable liquids. Clean periodically (at least 4 times/year).
• Water/Electricity: Turn off water tap after each wash. Unplug for cleaning/maintenance.
• Cleaning: Use a soft cloth with lukewarm soapy water for outer parts. Use the "Auto Clean" cycle for internal parts (run without load, optionally with detergent).
• Detergent Drawer: Remove and wash regularly under running water.
• Door/Drum: Leave porthole door ajar to prevent odours.
• Pump: Small items may fall into the pump pre-chamber. Access by removing the front panel, loosening the pump cover (expect water leakage), cleaning thoroughly, and reassembling.
• Water Inlet Hose: Check annually for cracks or breaks. Replace if damaged. Never use previously used hoses.

Load Balancing System

The drum rotates to balance the load before spinning. If unbalanced, it spins at reduced speed or skips spinning. Mix small and large garments for better balance.

Accessories

Contact Technical Assistance Service for available accessories, such as a stacking kit.

Transport and Handling

Do not lift by the top section. Unplug, close water tap, secure door/drawer. Detach hoses, empty water, secure hoses. Re-insert transport bolts.

Troubleshooting

For further assistance, contact Technical Assistance Service. Download Safety Instructions, Product Fiche, and Energy data from http://docs.hotpoint.eu or via QR Code. Model information is available at https://eprel.ec.europa.eu.