User Guide for ELSEMA models including: ML500 Magnetic Lock, ML500, Magnetic Lock, Lock
ELSEMA Waterproof electromagnetic lock for sliding and swing gates and doors, ML500 - 1 - Waterproof magnetic lock for automatic sliding and swing gates.
ELSEMA Electromagnetic lock for sliding and swing gates and doors, ML500 - 2 - Input Voltage selection/ Output 12VDC : Connect Black and Blue wires together for negative (-12VDC) : Connect Red and Green wires together for positive ( 12VDC)
File Info : application/pdf, 5 Pages, 186.31KB
DocumentDocumentELSEMA Electromagnetic lock for sliding and swing gates and doors, ML500 Magnetic lock for automatic sliding and swing gates. Elsema part No: ML500 Features Dual Voltage. 12/24VDC User selectable. For outdoor use Holding Force up to 500KG/1200lbs Corrosion free No noise No magnetism during power failure Built-in Voltage spike suppressor Application Sliding gates or swing gates Overhead doors or door entrance Description The ML500 is an electromagnetic lock which is designed to hold up to 500Kg force. The ML500 magnetises when 12/24VDC is applied to the supply wires. The ML500 is ideal for installation on automatic sliding or swing gates, doors etc. The lock can be mounted directly or with the L bracket supplied. It must be rigidly mounted to the gate post. The armature is designed to pivot slightly to compensate for reasonable misalignment. Due to the wide diversity of gate designs custom mounting brackets may be necessary to facilitate the installation. L-Z bracket can be used to accommodate the majority of gate and door applications. The lock is mounted to the vertical gate post. The armature is mounted to the leading edge of the gate. Technical Data Power Source Operating Current 12 Volts DC 500mA 24 Volts DC 250mA Holding Force Output Connections Shipping Weight (Including brackets) Dimensions Lock Armature 500Kg, 1200lbs. Reed switch output: COM, NO, NC. Rated at 500mA at 30VDC/AC Striped wire 4500 grams 220 x 70 x 50mm 185 x 61 x 16mm - 1 - Input Voltage selection/ Output ELSEMA Electromagnetic lock for sliding and swing gates and doors, ML500 12VDC : Connect Black and Blue wires together for negative (-12VDC) : Connect Red and Green wires together for positive (+12VDC) 24VDC : Connect Green and Blue together and supply 24VDC to Red and Black wires. Red for positive and black for negative. Reed switch output (indicates when the armature is engaged with the magnet) Common: Orange Normally Closed: White Normally Open: Yellow - 2 - Typical Installations for gates ELSEMA Electromagnetic lock for sliding and swing gates and doors, ML500 - 3 - ELSEMA Electromagnetic lock for sliding and swing gates and doors, ML500 - 4 - L-Z Bracket Assembly ELSEMA Electromagnetic lock for sliding and swing gates and doors, ML500 Manufactured by Elsema Pty Ltd 31 Tarlington Place, Smithfield NSW 2164, Australia Ph: 02 9609 4668 Website: http://www.elsema.com - 5 -