Installation Guide for Fittes models including: Flush Floor Vent Lite Supply, Floor Vent Lite Supply, Vent Lite Supply, Lite Supply, Supply

Flush Floor Vent [Lite] Install Guide 4x9 [11-17-2023]

Install Guides – Fittes

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 1 Pages, 4.06MB

Document Document

Flush Floor Vent [Lite] Supply
Install Guide

1

2

Drop in base on subfloor. If required, fasten with wood screws.
*DO NOT use provided screws here.
3

Install surface material on top of Base so that it is completely flush.
4

Dry fit Body into Base.
5

With the resistance from the flange, adjust Body up and down until it is
flush with the top of surface.
6

Once adjusted to prefered height, fasten the Body to the Base using provided screws through the four
pilot holes in each corner
7

Backfill Tray with bonding material and place precut piece of surface
material inside Tray.
8

Hold in place and flip Tray. Apply even pressure until surface material lies flat
with the rim of Tray. Leave to cure.

Insert and slide Tray in place. Enjoy!

*Control Air Flow* Slide to remove tray and adjust flange open and closed. For optimal air flow, push flanges past 90º.

Additional Support support@fittes.com / www.fittes.com

Made in Canada