JOYDECO

Components List

• L-bracket × 2
• C-bracket × 2
• Screw × 5
• Expansion Bolt × 5

If any of them are missing or damaged, please feel free to contact Joydeco.

Tools and Fasteners You May Need (Package Not Included)

• [Drill with Bits]
• [Metal Tape Measure]
• [Screwdrivers]
• [Pencil]

Two Installation Methods

This guide covers two primary methods for installing your Cordless Zebra Roller Shade: Inside Mount and Outside Mount.

A: INSIDE MOUNT

Diagram shows brackets to be mounted inside the window frame.

1. 1. Mark and drill two holes at the same depth within the window frame symmetrically, then insert the expansion bolts into the holes.
2. 2. Fix two C-brackets with screws and ensure they are aligned.
3. 3. Place the rear groove of the headrail into the bracket, rotate the headrail upwards to place it into the bracket completely.
4. 4. Finish installation when you hear "click" [audio-cue].

B: OUTSIDE MOUNT

Note: Ensure the two brackets are installed symmetrically at the same height, depth, and both vertical to the window frame.

Diagram shows brackets to be mounted on the wall above the window frame.

B-1. Bracket Assembly and Wall Mounting

1. 1. Connect the L-bracket and the C-bracket. Turn the C-bracket 90 degrees to tighten, ensuring the C-bracket is vertical to the wall.
2. 2. Mark and drill two holes at the same height above the window frame symmetrically, then insert the expansion bolts into the holes.
3. 3. Fix the bracket (assembled in step 1) to the wall.

B-2. Shade Attachment

4. 4. Fix another bracket on the wall. Ensure they are aligned.
5. 5. Place the rear groove of the headrail into the bracket, rotate the headrail upwards to place it into the bracket completely.
6. 6. Finish installation when you hear "click" [audio-cue].