TRACER Smartwatch SM6 OPAL Instruction Manual

Safety Information

• Charge the battery before first use.
• If the device will not be used for an extended period, turn it off.
• It is recommended to charge the battery at least once every 3 months, even if the watch is not in use.
• Avoid flooding and constant exposure to moisture.
• Keep the product away from fire and heat sources.
• Do not attempt to disassemble the housing yourself; use only qualified service points.

1. Battery Charging SM6 OPAL

Charge the device's battery before using it for the first time. To do this, attach the magnetic charging tip to the underside of the device and connect it to a power source. Ensure you use a power source with appropriate power output.

2. "Hryfine" APP Installation

Scan the QR code below [QR Code for Hryfine App] to download and install the app compatible with the SM6 OPAL. The application can also be found in the App Store or Google Play Store by searching for "Hryfine".

Application system requirements: Android 5.0+, iOS 9.0+

3. Connect SM6 OPAL with Mobile Device

• Install the "Hryfine" application on your mobile device and enable the Bluetooth function.
• Ensure you have granted the application appropriate permissions, such as for communicating with social media and accessing location data.
• Launch the application and set up your profile. The next step is to find the SM6 OPAL device in the list of available devices for connection and pair the application with the device.
• Once connected, the SM6 OPAL watch will automatically synchronize the time, date, and interface language.
• To enable the watch's BT module for call functions, the mobile phone used with the SM6 OPAL watch must be connected individually via Bluetooth.
• Attention: Connecting and syncing solely through the app may not be sufficient to support call functions. Ensure a separate mobile Bluetooth connection is also established.

4. Basic Functions and Settings

• The SM6 OPAL features a touch screen. Touching any point on the screen and swiping your finger across it will navigate you to the corresponding function screen.
• To activate the watch display, use a short press of the control crown [control crown].
• A double press of the control crown [control crown] will take you to the full set of smartwatch functions.
• When the display is active, swiping to the right will show detailed information about the device version.
• Rotating the control crown [control crown] up or down, or swiping the screen left [swipe left], allows you to change the watch face from those installed on your watch. You can also install other watch faces via the application.
• Swiping the screen up [swipe up] will take you to the watch settings (Bluetooth, battery, screen brightness, etc.).

Functions of the SM6 OPAL

• BT Calling: After connecting with the application, you can make phone calls directly through the watch, utilizing its built-in high-quality microphone and speaker.
• Sleep Monitor: Wearing the device while sleeping helps monitor the length and quality of your sleep.
• Pulse and Blood Pressure Measurement: The device can measure pulse and blood pressure parameters at set intervals and save them in the application. You can also initiate a measurement on demand by accessing the specific function in the watch.
• Work with Breath: This feature allows you to calm your breathing using various rhythms suggested by the watch.
• Blood Oxygen Saturation Measurement: Check your blood oxygen level by activating the SO2 function.
• Measurement of Steps, Distance, Calories: The device automatically monitors the number of steps, sums up the distance traveled for the day, and counts calories burned.
• Workout, Sports: Track your progress and achievements in various sports disciplines. Set goals and push your limits.
• Weather: After synchronizing with the phone application and setting your location, you can view the weather forecast for the current day and upcoming days.
• Hydration Reminder: You can set the frequency of hydration reminders for your body within the application.

5. Notes

The SM6 OPAL device you own is water-resistant. This means you can use it freely in rain or during adverse weather conditions. It is also resilient to intense training sessions where it might come into contact with sweat. However, remember to avoid swimming with the device and full immersion in water. We also advise against wearing the device on your wrist 24/7, as constant skin contact prevents it from breathing. Before wearing the watch, ensure the side that contacts the skin is dry.

6. Parameters

Environmental Protection

The symbol of a crossed-out wheeled bin [Recycling Symbol: Do Not Dispose with Household Waste] placed on the equipment, packaging, or accompanying documents indicates that the product must not be disposed of with other household waste. Used equipment may contain substances that are toxic and carcinogenic, hazardous to human health and life, and that can poison soil and groundwater. It is the user's responsibility to hand over used equipment to a designated collection point for proper processing. For more information on recycling electronic and electrical equipment, please contact your local authorities, waste disposal services, and the place of purchase. Households play a significant role in contributing to the reuse and recovery of secondary raw materials, including recycling of used equipment. At this stage, attitudes are formed that influence the preservation of our common good: a clean natural environment.

Manufacturer Information

Manufacturer: Megabajt Sp. z o.o.

Address: ul. Rydygiera 8, 01-793 Warszawa