COIBOR CL100 Video Light

Caring For Your COIBOR Product

• Keep heat sources away from the product to prevent mechanical damage.
• Do not extradense the product.
• Do not leave the product unattended while in use. Keep out of reach of children.
• Remove the protective cover before use.
• Do not handle with wet hands. Do not touch the COIBOR surface.
• Do not block the ventilation and do not look at the light directly when using.
• Do not attempt to disassemble or modify the product. Doing so voids the warranty.
• Have the product checked or repaired by authorized technicians if any performance is affected.
• If the car is not in the system, please contact COIBOR.
• Authorized technicians ensure reliability and impact of material forces.
• Failure to follow all instructions may result in mechanical damage.
• Warranty does not apply to human errors.

Product Instructions

If there is no operation for 10 seconds, the current settings are automatically saved and the selection mode is suited.

Power Button

Press the power button to turn the unit on or off.

Mode Switch

The Mode Switch cycles through different voltage settings and lighting modes:

• DC100 (100V)
• DC110 (110V)
• DC120 (120V)
• DC130 (130V)

Each series switches to zero lighting mode. The sequence for mode switching is:

• DC11 → D11 → D12
• DC12 → D11 → D23
• DC13 → D11 → D12
• DC14 → D11 → D23

Long press the mode switch for 3 seconds to enter search mode. The available modes are:

• DC100 (100V)
• DC110 (110V)
• DC120 (120V)
• DC130 (130V)

The output power will be enhanced for 60 seconds. During this time, the power status will show as "FULL". When the mode ends, the power status restores.

Adjustment Dial

1. Press the dial to switch between Brightness and Color Temperature.
2. Roll the dial to adjust the value. Brightness can be adjusted from 0.1 to 145, and Color Temperature from 2700K to 4500K.
3. Press the dial again to switch to another control.

Group Option

Press the button to set the group (Group A/B/C/D).

Fan Option

Place a group (A) on the group. SWINT1: The fan speed adjusts according to working temperature. Press the Fan Option to switch to QLED Status.

QLED: If the fan is off, the product enters a protective mode to prevent overheating damage, reducing power output.

Fan Status

The fan status cycles through:

• SWINT1 → QLED → FULL
• F110 → F120
• F130 → F140
• F150 → F160
• F170 → F180

Power Button Indicator

The percentage displayed indicates the mains battery power being used. A plug icon indicates that AC power is being used.

Brightness

The following voltage options are available for brightness control:

• DC100 (100V)
• DC110 (110V)
• DC120 (120V)
• DC130 (130V)

CL100 Video Light Models

The following voltage options are available for the CL100 Video Light:

• D110 (110V)
• D120 (120V)
• D130 (130V)

(Note: The following sections appear to be repetitive listings of the CL100 Video Light models and their voltage options.)

Product Contents

The package includes:

• Bowens Mount Cover x1
• Packing Bag x1
• Remote Control x1 (Optional)

WARRANTY

Warranty Period

Thank you for purchasing COLASTRY products.

• Contracts are certified by their replacement or repair service. In case of quality defect(s) found in the product under review, you will be entitled to a warranty period of 15 days upon the date of the warranty.
• Original COLASTRY products are certified by a 12-month warranty period. The warranty period begins on the date of purchase of brand-new, unused products for the first year only.

Warranty Coverage

If the warranty period is between 15 and 20 years, it is not likely that the warranty period will be a long-term investment. The warranty period is not a long-term investment. If the warranty period is not a long-term investment, it is likely that the warranty period will be a long-term investment.

The COLASTRY product is out of the warranty coverage. Service and parts will be charged.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference in radio systems. The product is subject to change in the manner of a change in the equipment.

If the equipment does cause harmful interference to radio or television networks, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced customer for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate the equipment.

The device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information

The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance (20cm) between the radiator and your body.

Manufacturer Information

Guangzhou Zinying Technology Co., Ltd

Date: 2020-10-20

Toll-free: [Contact Information Not Provided]

Website: www.cflx.com