SimplyTech GO-SPLASH Outdoor Wireless Speaker User Manual
Product Overview
This document is the user manual for the SimplyTech GO-SPLASH outdoor wireless speaker. It provides essential information on safety, usage, specifications, and technical support.
Available models include GO-SPLASH-BLACK and GO-SPLASH-NAVY.
Safety & Care Instructions
- Do NOT expose any portion of this product to liquid, humidity, moisture, sharp objects, or extreme temperatures, as this can damage the product and void the warranty.
- Do NOT attempt to modify or disassemble the product in any way.
- Spot Clean ONLY.
- Only power the device with the provided cable.
Specifications
- Bluetooth Version: 5.3
- Battery Capacity: 800mAh
- Output Power: 3W
- Music Playtime at 50% Volume: 6 hours
- Material: Plastic & Fabric
- Product Size: 160x77x43mm
- Waterproof Rating: IPX4
- Features: Bluetooth & FM Radio, Built-in Mic for Handsfree Calls
How to Use Speaker
Charging & Powering On
- Open the rubber cover on the charging port.
- Use the included USB cable to fully charge the speaker for a minimum of 4 hours before first use. The LED indicator light will be on while charging.
- Press and hold the POWER button to turn the speaker on or off.
Bluetooth Pairing with Your Device
- Once powered on, the speaker will automatically enter PAIRING MODE. The connection will be indicated by a prompt sound.
- Pairing mode will last for 2 minutes. While in pairing mode, turn ON the Bluetooth Connection on your device, Scan/Search, and select "SPLASH GO SPEAKER".
- Once paired successfully, a prompt sound will notify you that it's connected to your device.
Speaker Functions
The speaker has the following functions, indicated by numbered controls:
- 1. POWER ON/OFF button.
- 2. PREVIOUS TRACK/VOLUME - button.
- 3. NEXT TRACK/VOLUME + button.
- 4. MODE button (long press to switch between Bluetooth and FM radio).
- 5. TYPE-C USB CHARGING PORT.
Technical Support & Warranty Information
This product is backed by a One Year Warranty from any defects. For warranty replacements, questions, or if you have any issues about this product, contact help@SimplyTechCorp.com.
Simply Tech Electronics Inc. declares that this radio equipment is compliant with Directives 2014/53/EU, 2011/65/EU & 2012/19/EU.
The EU Declaration of Conformity for this product can be viewed at www.SimplyTechCorp.com/docs.
Distributed by: SimplyTech Electronics, Inc. 1407 Broadway New York, NY 10018.
Made in China.
Regulatory Information
FCC ID: 2BKTL-SPLGO1
FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
