Bolin Technology PTZ Camera Wall Mount Bracket Installation Guide
This guide provides instructions for installing the Bolin Technology PTZ camera wall mount bracket (Model: C-WM1B).
Product Overview
The C-WM1B is a wall mount bracket designed for securely installing Bolin Technology PTZ cameras. It is compatible with both 2 Series and 6 Series cameras.
Included Components
- 1 x C-WM1B Wall Bracket
- 3 x M3*6PW screws (included with camera purchase)
Installation Steps
Step 1: Mounting the Wall Bracket
This step involves attaching the wall bracket to a suitable wall surface. Ensure the bracket is level using a horizontal ruler before fixing it.
Required Fixings: 4 x Fixing Screws (Not Included).
Diagram Description: The diagram illustrates the wall bracket being positioned against a wall. Holes on the bracket align with screw points on the wall. A horizontal ruler is shown to ensure the bracket is mounted straight. Four fixing screws are indicated for securing the bracket to the wall.
Step 2: Attaching the Camera (2 Series)
Once the wall bracket is securely installed, you can attach a 2 Series camera.
Required Screws: 3 x M3*6PW screws.
Diagram Description: The diagram shows a 2 Series camera being mounted onto the previously installed wall bracket. The camera is aligned with mounting points on the bracket, and three M3*6PW screws are used to fasten it.
Step 2.1: Attaching the Camera (6 Series)
Similarly, a 6 Series camera can be attached to the wall bracket.
Required Screws: 3 x M3*6PW screws.
Diagram Description: The diagram illustrates a 6 Series camera being mounted onto the wall bracket. The camera is positioned and secured using three M3*6PW screws.
Important Notes
- Ensure all screws are tightened appropriately for a secure installation.
- The fixing screws for the wall bracket are not included and must be sourced separately.
- The M3*6PW screws are typically included with the camera purchase.
