Smart Kit User Manual

Contents

• Specification
• Precautions
• Install the Smart Kit
• Network Configuration

1 Specification

• Model: EU-ODZ104(PVG-F); EU-ODZ104(PVG-Z)
• Standard: IEEE 802.11b/g/n
• Antenna Type: Printed PCB
• Antenna Frequency: WLAN 2400~2483.5 MHz
• Operation Temperature: 0°C~45°C / 32°F~113°F
• Operation Humidity: 10%~85%
• Power Input: DC 5V/300mA
• Maximum Transmitted Power: 19.8dBm

2 Precautions

• Applicable system: iOS 8.0 or above, Android 4.0 or above. Keep the app updated. Not all Android and iOS systems are guaranteed to be compatible.
• Wireless safety strategy: Supports WPA-PSK/WPA2-PSK encryption and none encryption. WPA-PSK/WPA2-PSK is recommended.
• Cautions: Network situations may cause timeouts. Ensure your smartphone camera is 5 megapixels or above for QR code scanning.

3 Install the Smart Kit (Wireless Module)

1. Remove the protective cap of the smart kit.
2. Open the front panel and insert the smart kit into the reserved interface.

WARNING: This interface is only compatible with the SMART KIT (wireless module) provided by the manufacturer.

4 Network Configuration

Cautions

• Forget other nearby networks and ensure your device is connected only to the desired wireless network.
• Ensure your device's wireless function works correctly and can reconnect to your original wireless network automatically.

Kindly reminder:

Complete all steps within 8 minutes after powering on the AC, or you will need to power it on again.

Using an Android device for network configuration

1. Ensure your mobile device is connected to the desired wireless network and has forgotten other irrelevant networks.
2. Disconnect the power supply of the AC.
3. Reconnect the power supply and continuously press the "LED DISPLAY" or "DO NOT DISTURB" button seven times within 10 seconds.
4. When the AC displays "AP", it indicates the AC wireless has entered "AP" Mode. Some AC types may not require step 2 to enter AP mode.

The company is not liable for issues caused by the Internet, Wireless Router, or Smart Devices. Contact the original provider for assistance.

Search and download the "Smart Lift" app from major application markets or scan the QR code to download the app.

Registration

If you do not have an app account, you can register or log in via an authentication code. Follow the on-screen instructions for registration.

1. Click "Register" to access the Smart Life privacy policy. Click "Agree" to proceed to the registration page.

Tuya Smart - Family/Member Management

1. When logged in, click "Create family" to go to the "Add family" page.
2. Enter a "Family name" and optionally set the location by clicking "Set location" and adjusting the map icon. Click "OK" to confirm.
3. Click "Add Room" to add rooms and then "Done" to complete room settings. Room settings can be modified later by clicking the "..." icon.

Add devices

Click "Add Device" or the "+" icon on the App homepage to enter the "Add Device" page. You can add devices manually or via auto scan.

WiFi Network pairing - EZ mode

The app supports EZ mode and AP mode. Switch modes by clicking "AP Mode" in the top right corner. For EZ mode, ensure the smart device indicator light is flashing rapidly before proceeding.

WiFi Network pairing - AP mode

Click the top right corner to switch to AP Mode. Ensure the smart device indicator light is flashing slowly before proceeding. Connect to the hotspot starting with "smartlife-xxxx", then return to the app and wait for the connection.

How to troubleshoot when network pairing failed?

• A. Power Status: Check if the equipment is powered on and turned on.
• B. Mode Status: Ensure the equipment is in EZ or AP mode.
• C. iOS 14 Permissions: Confirm local network and wireless data permissions are enabled for the app.
• D. Router Load: If the network is normal but configuration fails, check if the router is overloaded. Try turning off Wi-Fi on another device.
• F. Password Accuracy: Verify the entered router password is correct, paying attention to spaces and capitalization.
• G. Wi-Fi Broadcast: Ensure Wi-Fi broadcast is enabled, not hidden, and uses the 2.4G frequency band.
• H. Encryption Settings: Set router encryption to WPA2-PSK, authentication to AES, or automatic. Avoid "11n only" wireless mode.
• I. MAC Filtering: If MAC address filtering is enabled, remove the device from the list or disable filtering.
• J. DHCP Service: Ensure the router's DHCP service is enabled.
• K. AP Mode Connection: In AP mode, ensure the phone is fully connected to the device's hotspot before returning to the app.
• L. Insecure Network: Some phone systems may flag device hotspots as insecure; trust the hotspot in phone settings.
• M. Cloud Registration Issues: If stuck on "register to the cloud," there might be compatibility issues between the device and router.
• N. Hardware Problem: If connection issues persist, consider a potential hardware problem with the device.
• O. Hotspot Test: Use a mobile phone to create a hotspot and another phone to connect to it for network configuration.

If no issues are found, power cycle the device and repeat the network distribution process.

Information needed for troubleshooting:

• User login App account and app version number.
• Device ID.
• Router model.
• Video of network configuration failure.

Declaration of Conformity (DoC)

Unique identification of this DoC:

Company: PVO Holding B.V.

Address: Kassalurust 12C, Osa, 1347 KM Osa, The Netherlands

Product Name: Smart KX

Trade Name: Qlims / Q Excellence / Q Excellence Premium

Type or Model: EU-002394(PVU-F); EU-002394(PVG-F)

This smart kit conforms to the essential requirements and other relevant provisions of Directive 2014/53/EU.

Standards Conformed To:

• Health & Safety: EN 62311:2008, EN 50665:2017, EN 62308-1:2004/A11:2017
• EMC: EN 303 489-17 V5.2.4 (2020-89), EN 301 489-1 V5.2.3 (2019-11)
• Spectrum: EN 300 228 V2.2.2 (2019-07)

Technical file held by: GD Midas Air-Conditioning Equipment Co., Ltd.

Place and date of issue: 2020-12-14

Signed by: William van Dessen

Title: Group product & sourcing manager