User Manual for HUUM models including: H300102L03, DROP Embedding Flange, DROP, Embedding Flange, Flange
All manuals - Bsaunas
File Info : application/pdf, 1 Pages, 109.73KB
DocumentDocumentDROP x 6 x 6 Made in Estonia, EU info@huumsauna.com huumsauna.com #huumsauna HUUM Sauna OÜ Vahi tee 9, Tartumaa 60534, Estonia EN Embedding Flange Place the plates of embedding flange on the desired place of the boarding. Make sure that the end edges of the embedding flange are against the wall. Mark the inner edge of the embedding flange on the boarding of the sauna platform. Follow the marked line and draw the second contour 52 mm / 2 in outwards. We recommend using a 52 mm / 2 in wide wooden block for that purpose. Cut the wider contour by following the aperture. Attach the brackets of the embedding flange to the plates by using bolts and nuts. Install the embedding flange to the cut aperture, adjust the cut edge, if necessary. Attach the brackets to the boards of the platform with screws. You can now install the DROP heater. Follow the minimum height from the figure below: Find the latest updates on our website www.huumsauna.com FR Bride de fixation Disposez les plaques de la bride de fixation à l'endroit souhaité sur le banc de sauna de sorte que leurs extrémités s'appuient au mur. Marquez sur le banc de sauna, p.ex. avec un crayon, la position du bord intérieur. En suivant la ligne tracée marquez le contour du bord extérieur à la distance de 52 mm / 2 in du bord intérieur. (On peut le faire à l'aide d'une pièce de bois de 52 mm / 2 in de largeur). Découpez le trou dans le banc en suivant le contour plus large. Fixez les supports de la bride de fixation aux plaques avec des boulons et écrous. Disposez la bride de fixation au trou découpé (si nécessaire, ajustez le bord du trou). Fixez les supports au banc avec des vis. Ensuite on peut installer le poêle DROP en respectant la hauteur minimale indiquée sur la figure ci-dessous : Vous trouverez sur notre site web toutes les informations dont vous avez besoin www.huumsauna.com Min 380 mm 15