Sony VPL-PHZ10 Projector
5,000 lm (5,200 lm center) WUXGA laser light source projector
Overview
Cost effective laser projection with excellent picture quality, easy installation and low running costs.
The VPL-PHZ10 laser projector is a versatile, affordable choice for installation in a wide range of education, business and entertainment environments.
The powerful Z-Phosphor laser light source is teamed with Sony's advanced BrightEra 3LCD projection engine to deliver extremely bright, detail-packed WUXGA resolution images with generous 5000 lumens brightness and rich, stable colours. This laser light source allows up to 20,000 hours* of virtually zero maintenance operation without the worry of sudden lamp failures. An automated filter system cuts the hassle of regular dust cleaning. Near-zero maintenance needs are complemented by a range of energy-saving features, significantly driving down total lifetime ownership costs. Constant Bright maintains consistent light output levels throughout the laser's 20,000 hours (at light output mode "Middle") recommended lifespan.
Offering a stylish blend-in design and low fan noise, the VPL-PHZ10 fits smoothly into almost any environment – from academic institutions to corporate environments. Mount the projector at any angle, even on its side or upside down. Set-up's easier than ever with a friendly new installation menu.
*Actual hours may vary depending on usage environment.
Features
Very high image quality with Sony's advanced BrightEra 3LCD projection engine and Z-Phosphor laser light source
The Z-Phosphor laser light source is coupled with Sony's acclaimed BrightEra 3LCD projection engine to ensure high 5000 lumen image brightness with vivid, natural colour reproduction.
Constant Brightness
Constant Bright maintains the same brightness of 4,500 lumens throughout the 14,000 hour recommended life span.*
*When Constant Bright is on, and using 'Standard' light output mode
Advanced picture refinement technologies
Picture quality is boosted by advanced processing featured on Sony's home cinema projectors. Reality Creation uses a powerful pattern-matching database to optimise every pixel. Contrast Enhancer actively analyses and refines dark and light image areas for sparkling highlights and rich, deep blacks.
Crisp, detail-packed WUXGA resolution images
See fine detail in PC presentations, videos or multimedia signage with WUXGA (1920 x 1200) 16:10 resolution.
Up to 20,000 hours* operation with virtually no maintenance
The advanced laser light source offers up to 20,000 hours* operation without lamp exchange, reducing lifetime running costs compared with traditional projectors.
*Actual hours may vary depending on usage environment.
Hassle-free automatic filter cleaning
Focus on great-looking images instead of arduous maintenance tasks: new automated filter cleaning system removes dust every 100 hours.
Energy saving features
Reduce running costs even further with convenient energy-saving features: Picture Mute and Auto Dimming.
Save time with every presentation
Quick power On/Off dramatically cuts warm-up time after switch-on before you can start presenting at full brightness.
360° free-angle installation capability
Enjoy greater installation flexibility: position the projector freely at any angle – or its side or even upside down.
Supports HDBaseT
Simpler, more cost-effective installation and connectivity with digital transmission of HD video, audio and networking/control over a single Ethernet cable.
Quiet operation
Low fan noise ensures discreet, unobtrusive operation in quiet environments for academic and corporate use.
Slim, attractive blend-in design
The slim, stylish case design features a flat top surface that blends in discreetly when the projector is ceiling mounted.
Picture Mode
Picture Mode ensures great-looking pictures in any presentation conditions. Select Standard, Dynamic, or Brightness Priority mode for optimised image quality, with any source and in every room.
Simple set-up with friendly new Installation menu
Specifications
Display system
Display system: 3 LCD system
Display device
Size of effective display area: 0.76" (19.3 mm) x 3 BrightEra LCD Panel, Aspect ratio: 16:10
Number of pixels: 6,912,000 (1920 x 1200 x 3) pixels
Projection lens
Focus | Manual |
Zoom - Powered/Manual | Manual |
Zoom - Ratio | Approx. x 1.45 |
Throw ratio | 1.28:1 to 1.88:1 |
Lens shift - Powered/Manual | Manual |
Lens shift - Range Vertical | +20% to +55% |
Lens shift - Range Horizontal | +/- 10% |
Light source
Type: Laser diode
Filter cleaning / replacement cycle (Max.)
Filter cleaning/ replacement cycle (Max.) | 20,000 H (service maintenance) |
Screen size
Screen size: 40" to 300" (1.02 m to 7.62 m)
Light output *1
Mode: Standard | 5,000lm *2 |
Mode: Standard (Centre) | 5,200lm *3 |
Color light output *1
Mode: Standard | 5,000 lm |
Contrast ratio (full white / full black) *1
Contrast ratio (full white / full black) | 500,000:1 |
Speaker
Speaker | 16 W (monaural) |
Displayable scanning frequency
Horizontal | 15 kHz to 92 kHz |
Vertical | 48 Hz to 92 Hz |
Accepted signal resolution
Computer signal input: Maximum signal resolution: 1920 x 1200 *4
Video signal input: NTSC, PAL, SECAM, 480/60p, 576/50i, 720/60p, 720/50p, 1080/60i, 1080/50i. The following items are available for HDMI input only; 1080/60p, 1080/50p, 1080/24p
Color System
Color System: NTSC3.58, PAL, SECAM, NTSC4.43, PAL-M, PAL-N, PAL60
Keystone correction (Max.)
Horizontal | +/- 30 degrees |
Vertical | +/- 20 degrees |
INPUT OUTPUT (Computer/Video/Control)
INPUT A | RGB / Y PB PR input connector:Mini D-sub 15 pin (female) Audio input connector: Stereo mini jack |
INPUT B | HDMI input connector: HDMI 19-pin, HDCP support Audio input connector: HDMI audio support |
INPUT C | HDMI input connector: HDMI 19-pin, HDCP support Audio input connector: HDMI audio support |
INPUT D | HDBaseT interface connector: RJ45, 4 play (Video, Audio, LAN, Control) |
VIDEO IN | Video input connector: BNC Audio input connector: Shared with INPUT A |
OUTPUT | Audio output connector: Stereo mini jack |
REMOTE | D-sub 9-pin (male) / RS232C |
LAN | RJ45, 100BASE-TX (Shared with INPUT D) |
USB | TYPE-A |
USB | TYPE-B |
Acoustic Noise *1
Lamp Mode: Standard / Middle / Low | 36 dB / 28 dB / 25 dB |
Operating temperature / Operating humidity
Operating temperature / Operating humidity | 0° to 40°C (32°F to 104°F) / 20 % to 80% (no condensation) |
Storage temperature / Storage humidity
Storage temperature / Storage humidity | -10° to +60°C (14°F to 140°F) / 20 % to 80% (no condensation) |
Power requirements
Power requirements | AC 100 V to 240 V, 4.3 A to 1.7 A, 50 Hz / 60 Hz |
Power Consumption
AC 100 V to 120 V | Mode: Standard: 424 W |
AC 220 V to 240 V | Mode: Standard: 403 W |
Power Consumption (Standby Mode)
AC 100 V to 120 V | 0.5 W (when "Standby mode" is set to "Low") |
AC 220 V to 240 V | 0.5 W (when "Standby mode" is set to "Low") |
Power Consumption (Networked Standby Mode)
AC 100 V to 120 V | 12.5 W (LAN) 13.2 W (optional WLAN module) 16.8 W (HDBaseT) 17.4 W (ALL Terminals and Networks Connected, when "Standby Mode" is set to "Standard") |
AC 220 V to 240 V | 11.9W (LAN) 12.6W (optional WLAN module) 17.0W (HDBaseT) 17.6W (ALL Terminals and Networks Connected, when "Standby Mode" is set to "Standard") |
Standby Mode / Networked Standby Mode Activated
Standby Mode / Networked Standby Mode Activated | Approx. 2 Minutes |
Heat dissipation
AC 100 V to 120 V | 1446 BTU/h |
AC 220 V to 240 V | 1374 BTU/h |
Dimensions (WxHxD)
Dimensions (W x H x D) (without protrusions) | 510 x 113 x 354.6 mm (20 3/32 x 4 7/16 x 13 31/32 inches) |
Mass
Mass | Approx. 8.7kg (19 lb) |
Supplied accessories
Remote commander | RM-PJ8 |
Notes
*1 The figures are approximate. They vary depending on the environment or how the projector is used.
*2 The value is in accordance with ISO 21118, and may differ depending on the actual unit. Brightness and contrast vary depending on use conditions and environments.
*3 The value is light output measured at center area of screen in Standard mode, and average of all products shipped.
*4 Available for VESA Reduced Blanking signal.
This projector has a total constant brightness of 4500 lumens for up to 14,000 hours depending on usage environment. This enables users to experience the projectors' original level of image quality for years, while achieving a maximum 5,000 lumens brightness when the constant brightness mode is off.