Owner's Manual for tuya models including: SPI dimLED RGB and RGBW LED Controller, SPI, dimLED RGB and RGBW LED Controller, RGBW LED Controller, LED Controller, Controller
File Info : application/pdf, 5 Pages, 2.95MB
DocumentDocumentdimLED Tuya SPI Single Color, RGB/RGBW SPI LED Controller Multi-pixel Single color, RGB/RGBW LED strip controller with SPI signal output, Tuya smart APP cloud control. Voice control, support for Amazon Alexa, Google Assistant, Tmall Genieand Xiaodu voice assistant. Compatible with Single color, RGB or RGBW LED strips with 49 kinds chip, the chip type and R/G/B/W color sequence can be set through the APP. Compatible chip: TM1809(default), TM1804, TM1812, UCS1903, UCS1909, UCS1912, SK6813,UCS2903, UCS2909, UCS2912, WS2811, WS2812, WS2813, WS2815, SM16703P,TM1803, TM1829, TLS3001, TLS3002, GW6205, MBI6120, TM1814B(RGBW), SK6812(RGBW), WS2813(RGBW), WS2814(RGBW), UCS8904B(RGBW), LPD6803, LPD1101, D705, UCS6909, UCS6912, LPD8803, LPD8806, WS2801, WS2803, P9813, SK9822, TM1914A, GS8206, GS8208, UCS2904, SM16804, SM16825, SM16714(RGBW), UCS2603, UCS5603, SM16714D, UCS7604(RGBW), UCS7804(RGBW). Painted segment color mixing: full color lling, color pencil segment painting, eraser segment light off. Rich dynamic effects: 44 default and 10+ custom dynamic scenarios, 16 variations. 3 APP music rhythms. Match with RF 2.4G RGB remote control optional. Technical Parameters Input and Output Input voltage Input Current Input signal Output signal Scenario Mode Pixel Dots 5-24VDC 8A WiFi + RF 2.4GHz SPI(TTL) x 2 44 default and 10+ customizations MAX.1000 Mechanical Structures and Installations Safety and EMC EMC standard (EMC) Safety standard(LVD) Certification EN IEC 55015:2019+A11:2020 EN 61547:2009 EN IEC 61000-3-2:2019+A11:2021 EN 61000-3-3:2013+A11:2019 EN 61347-1:2015+A1:2021 EN 61347-2-13:2014+A1:2017 CE,EMC,LVD Warranty Warranty 3 years Environment Operation temperature Case temperature (Max.) IP rating Package Size Gross weight SPI LVD Ta: -30 OC ~ +55 OC Tc: +65 OC IP20 L120 x W43 x H27mm 0.066kg Power input + Power input - Installation rack DC socket input LED indicator Match/Set key SystemWiring 3G/4G/5G WiFi Tuya Cloud RGB-SPI WiFi Mobile Phone WiFiRouter 15m V+ 38.00 mm INPUT 5-24VDC Output + DATA1 CLK1 Installation rack DATA2 CLK2 GND 114.00 mm 20.00 mm Wiredconnection Wirelessconnection RGB pixel LED strip 30m RGBW pixel LED strip Note: 1.Theabovedistanceismeasuredinspacious(noobstacle)environment, Pleaserefertotheactualtestdistancebeforeinstallation. 2.PleasecheckiftheWiFi routernetin2.4Gband, the5Gband isnotavailable, and donothideyourrouternetwork. 3. Pleasekeepthedistancebetweendevicesandrouterclose, andchecktheWiFisignals. 4. WiFi signal strength detection: open the main interface of social security, click enter the device interface, click "check device network" for testing. User Manual Ver 1.0.4 2024.5 Page 1 Wiring Diagram Controller connect with SPI spotlights (TM1803) AC100-240V Power Supply 5-24VDC Constant Voltage INPUT 5-24VDC V+ SPI Signal SPI Spotlights Controller connect with one SPI pixel strips (WS2801) AC100-240V Power Supply 5-24VDC Constant Voltage Controller connect with SPI digital light tube (TM1809) AC100-240V Power Supply 5-24VDC Constant Voltage INPUT 5-24VDC INPUT 5-24VDC V+ V+ SPI Signal V+ DA CK V- LED Pixel Strip SPI Signal SPIDigital Light Tube SPIDigital Light Tube Controller connect with multiple SPI pixel strips (LED strip load over 8A) INPUT 5-24VDC AC100-240V Power Supply 5-24VDC Constant Voltage V+ DA CK VV+ Power Supply 5-24VDC SPI Signal DA CK VV+ Power Supply 5-24VDC SPI Signal Wire Preparation: 1. The wiring can be solid or stranded with a cross-sectional area of 0.5 to 1.5 mm². Conventional 1mm² can withstand 10A output current. 2. When wiring is installed, the terminals must be tightened. If they are not tightened, the contact point resistance will be too high and the terminals will easily burn due to heat when used at full load for a long time. InstallationPrecautions: 1. If the SPI LED strip is a single-wire control method, the DATA and CLK signal line outputs of the controller are same, and one controller can connect 4 LED strips. 2. When the load of the light strip exceeds 8A, the light strip needs to be powered by another power supply (the light strip and the power supply must share the same ground), and only the DATA/CLK and GND lines are connected between the controller and the light strip. 3. The output power of the constant voltage power supply is at least 1.2 times that of the output load (light strip), otherwise the full power output of the load will easily cause the lights to icker or shake automatically. 4. The voltage of the power supply needs to be the same as the voltage of the light strip to avoid the phenomenon of the light strip not being lit or slightly lit. 5. When installing, the length of the signal line (DATA/CLK) needs to be 10 metres, and if it exceeds 10 metres, it needs to be connected to an SPI signal ampli er (common ground) for signal ampli cation, to avoid signal interference due to the line being too long. 6. When installing, the SPI signal lines (DATA,CLK) need to be separated from the strong power (100~240VAC) lines at a distance of 15cm to avoid the magnetic eld generated by the strong power from interfering with the signal transmission. 7. Each signal output port (DATA/CLK) can only be connected to one set of light strips. 8. The light strip is always on without control, it may be that the signal line (DATA/CLK) is open or the chip of the light strip is damaged, it is recommended to replace the signal line or the light strip. User Manual Ver 1.0.4 2024.5 Page 2 Tuya smart APP Network Connection Push twice Match key fastly, or press and hold Match key for 2s: clear previous network connection, enter Smart config mode, LED indicator flash fastly. Press and hold Match key for 5s: Clear previous network connection, enter AP config mode, LED indicator flash slowly. If smart config failed, please try AP config. If Tuya smart APP network connection succeed, the RUN LED indicator will stop flash, and in Tuya smart APP, you can find device . Other interface For the first time use, set LED strip length, chip type and color sequence. Light Strip Length interface Strip length setting: Select the appropriate number of pixels according to the actual length of the strip, 10 -1000. Lights with color sequence interface Select the corresponding R/G/B/W sequence according to the color sequence of the light strip. (RGB, RBG, GRB, GBR, BRG, BGR, RGBW, RBGW, GRBW, GBRW, BRGW, BGRW, WRGB,WRBG, WGRB, WGBR, WBRG, WBGR) Plan interface Countdown: Customize the countdown time (Max.24 hours) to perform the on/off action. Timer: Customize multiple times to perform the on/off light action. Chip type interface Select the corresponding chip according to the chip type of the light strip. User Manual Ver 1.0.4 2024.5 Chip Type TM1803 TM1809 TM1829 TLS3001 GW6205 MBI6120 TM1814B(RGBW) SK6812(RGBW) UCS8904B(RGBW) LPD6803 LPD8803 WS2801 P9813 SK9822 TM1914A GS8206 UCS2904 SM16804 SM16825 SM16714(RGBW) UCS5603 UCS2603 SM16714D UCS7604(RGBW) UCS7804(RGBW) Compatible Chip TM1804, TM1812, UCS1903, UCS1909, UCS1912, SK6813,UCS2903, UCS2909, UCS2912, WS2811, WS2812, WS2813, WS2815, SM16703P TLS3002 WS2813(RGBW), WS2814(RGBW) LPD1101, D705, UCS6909, UCS6912 LPD8806 WS2803 GS8208 Page 3 Tuya smart APP Interface Colour: Touch the color rectangle to adjust color and saturation. Touch the brightness slide to adjust brightness. White: Touch the color rectangle to adjust color temperature. Touch the brightness slide to adjust brightness. Color Fill: Change the color of the full segment of the LED strip. Color pen: change the color of a single segment of the LED strip. ColorCard: Touch the color card array to select many different colors. Touch the brightness slide to adjust brightness. Combination: Select a proportional distribution of multi-color circle, evenly distribute these colors on the LED strip. Eraser: Erase the color of a single segment of the LED strip, i.e., turn off the light. Color transition: When there are multiple colors in the LED strip, you can set to turn on or off the color segment gradient transition. Scene interface 44 predefined scenarios and 10+ custom dynamic scenarios selectable. The custom scenarios can select 16 types variations (fade, jump, breath, flash, flow, rainbow, shooting star, pile-up, floating down, chasing light, floating, flashing, bouncing, shuttle, chaotic flashing, open and close), the 1-8 colors, full or segment control, forward or reverse motion direction, adjustable brightness and speed. Music rhythm interface 6 local music modes (rock, jazz, classical, rolling, energy, spectrum) selectable. 3 APP modes (music rhythm, game, romance) selectable. Adjustable sensitivity of the received sound. The light follows the rhythm according to the music collected by the phone microphone. Note: the controller only supports App mode. Notes. 1. In APP, a light strip is fixed with 20 segments, strip length (total number of pixel points) ÷ 20 segments = number of pixel points per segment. 2. The maximum length of the light strip is 1000 pixels, for example, a light strip of 5 meters long with 60 pixels per meter, you can set the length to 300 pixels. The whole light strip is divided into 20 segments, each segment has 15 pixels. 3. When the light strip length is less than or equal to 20 pixels, for example, 10-20, each pixel sequentially corresponds to each segment from the beginning. 4. When the light strip length is not an integer multiple of 20, the remainder of the strip will display the color of the last segment. 5. When the actual light strip length is not an integer multiple of 20, it is recommended to set the length longer and increase the value to a multiple of 20. 6. When the set of the light strip length is less than the actual length, the back part of the light strip can not be controlled. 7. When the selected dynamic mode cycle running interval is too long, please reset the correct pixel length. 8. When the static or dynamic mode color display is not consistent with the APP interface, please re-select the light strip color sequence. Match R9 Remote Control Match:Short press on thematch key, immediately press on/off key of the remote. The LED indicator fast flash a few times means match is successful. Delete: Press and hold match key for 10s to delete all match, The LED indicator fast flash a few times means all matched remotes were deleted. User Manual Ver 1.0.4 2024.5 Page 4 R9 remote control selectable dynamic mode list No. P01 P02 P03 P04 P05 P06 P07 P08 P09 P10 P11 P12 P13 P14 P15 P16 P17 P18 P19 P20 Name Red horse race white ground, forward Green horse race white ground, forward Blue horse race white ground, forward Yellow horse race white ground, forward Cyan horse race white ground, forward Purple horse race white ground, forward 7 color multi horse race, forward 7 color horse raceclose + open 7 color multihorse race close + open 7 color scan close + open 7 color multi-scan close + open Blue White chase, forward Green Cyan chase, forward RGB chase, forward 7 color chase, forward Blue meteor, backward Purple meteor, backward White meteor, backward 7 color meteor, backward Red oat, forward No. P21 P22 P23 P24 P25 P26 P27 P28 P29 P30 P31 P32 P33 P34 P35 P36 P37 P38 P39 P40 Name Green oat, forward Blue oat, forward Purple oat, forward RGBW oat, forward Red Yellow oat, forward Green Cyan oat, forward Blue Purple oat, forward Blue White oat, forward 6 color oat, forward 6 color smooth sectionally, forward 7 color jump sectionally, forward 7 color strobe sectionally, forward White horse race (RGB jump) White smooth horse race (RGB smooth) White starlight (RGB random jump) White smooth starlight (RGB random smooth) White ow, forward White ow, forward on + backward off White ow, forward on + backward on White oat,forword Note: P33-P40 dynamic modes are applicable to SPI type white light strip. P33-P36 dynamic modes, if the color SPI strip is connected, the corresponding color effect will appear. User Manual Ver 1.0.4 2024.5 Page 5Corel PDF Engine Version 16.1.0.843