Instruction Manual for AUDIO ARRAY models including: AM-C10 Play Conference Microphone and Speaker, AM-C10, Play Conference Microphone and Speaker, Conference Microphone and Speaker, Microphone and Speaker, Speaker

MY6说明书

User Manual (PDF)

Audio Array AM-C10 USB Plug & Play Conference Microphone & Speaker | Omni Directional Pickup Upto 4M | Speaker and Mic Mute Buttons | Volume Control & Mute Button| Ideal for Meeting & Video Call. : Musical Instruments

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 1 Pages, 6.01MB

Document Document

Product features
1, USB free driver, Plug-and-play, and the microphone can pick up sound from 360 degree omnidirectional. 2. Full duplex, smooth two-way communication, compatible with a variety of common conference software. 3. DSP digital noise reduction chip to eliminate echo and suppress noise. 4. The microphone can pick up sound within 4 meters. 5.Full frequency speaker, high fidelity output. 6. Metal body, stable and anti vibration. 7.A variety of application scenarios: online conference, business negotiation, video / audio chat, Skype, games, playing music, etc.

Configuration list
Microphone with Speaker USB Cable
Function display

Instructions
(1) Insert one end of the USB A/type-C data cable into the type C port of the microphone and the other end into the USB A port of the computer. (2) Control panel sound, select the "recording" tab, and set the microphone "YM USB audio device" as the default device. (see the figure below)

(3) Double click the microphone and select the "volume" tab to adjust the volume of the microphone as needed. (see the figure below)

Parameter

YM USB audio device

1. Data port type C: used to connect a computer for data transmission.
2. Speaker mute button: connect the computer, the indicator light turns on, press the button, the indicator light goes out, and the speaker no longer produces sound.
3. Microphone mute button: Connect the computer, the indicator light is on, press the button, the indicator light is off, and there is no input from the microphone.
4. Microphone pickup holes: Inlets for sound pickup are provided on the side of the device.

Connection diagram

Simple fault handling

Problem description Possible causes processing method

Connected to the computer but not turned on

The USB interface is not plugged in properly

Check whether the connection is successful. It is recommended to insert the rear USB port

No sound output

The horn sound setting is too low, or the speaker mute button is turned on

Adjust the sound output or cancel the horn mute key

Sound distortion,call discontinuity

Output sound too loud

Adjust sound output

No sound input

This device is not selected in recording

select the device, adjust the microphone level, and confirm that the microphone mute button is not turned on