Zitta Bellini/Piazza 2.0 Shower Doors
Installation Guide
Product Series
This guide pertains to the Zitta Bellini and Piazza 2.0 series shower doors.
- Bellini/Piazza 2.0 48"
- Bellini/Piazza 2.0 54"
- Bellini/Piazza 2.0 60"
- Bellini/Piazza 2.0 72"
Note: Installation videos are available for select products only.
Feature: Doors are available with or without a towel bar. Some models are reversible.
Contact Information
Zitta Group
81, Theodore-Viau, Terrebonne, Quebec, Canada, J6Y 0J8
Tel: 1-855-492-4242 | 450-704-2323
Fax: 1-866-735-6885
Email: Info@zittagroup.com
Website: www.zittagroup.com
Parts Identification
The following section identifies key components used in the installation. Refer to the diagrams in the original document for visual placement.
| Part Number | Description (English) | Quantity |
|---|---|---|
| 1 | Clear fixed panel with towel bar | 1 |
| 1 | Clear fixed panel without towel bar | 1 |
| 4 | Brushed nickel finish hardware | (Varies by step) |
| 5 | Brushed gold finish hardware | (Varies by step) |
| 6A, 6B, 7A, 7B | (Specific panel components) | 1 each |
| 8A, 8B | (Specific panel components) | 2 each |
| 9A, 9B | (Specific panel components) | 1 each |
| 10A, 10B | (Specific panel components) | 2 each |
| 11A, 11B | (Specific panel components) | 2 each |
| 12A, 12B | (Specific panel components) | 1 each |
| 13 | (Specific component) | 1 |
| 14 | (Specific component) | 1 |
| 15 | (Specific component) | 1 |
| 16 | Bellini/Piazza 2.0 12" handle | 1 |
| 17 | (Specific component) | 2 |
| 18 | (Specific component) | 1 |
| 19 | (Specific component) | 1 |
| 20 | (Specific component) | 1 |
| 21 | (Specific component) | 1 |
| 22 | (Specific component) | 1 |
| 23 | (Specific component) | 1 |
| 24 | (Specific component) | 1 |
| 25 | (Specific component) | 1 |
| 26 | (Specific component) | 5 |
| 27 | 2.5mm & 4.0mm Allen key kit | 3 |
| 28 | (Specific component) | 2 |
| 29+30A | Bellini wall closing with side panel | 1 |
| 29+30B | Piazza wall closing with side panel | 1 |
| 31 | (Specific component) | 2 |
| 32 | Towel bar | 1 |
| 33 | Colored handle cover | 1 |
| Sp1 - Sp15 | Return panel components (Sp1-Sp15) | (Varies) |
| Shower hook | Shower hook | 1 |
Note: Specific part numbers (e.g., PJ00011_) and codes (e.g., DG0248SF01) are internal references and may not be required for standard installation.
Installation Overview
This document provides detailed, step-by-step instructions for assembling and installing Zitta Bellini and Piazza 2.0 shower doors. The process involves identifying all parts, preparing the installation area, and systematically connecting components. Key steps include:
- Panel Attachment: Securing fixed panels and doors to walls or other panels using provided hardware.
- Hardware Installation: Attaching handles, towel bars, and other accessories.
- Adjustments: Ensuring proper alignment and sealing of the door and panels.
- Wall Mounting: Specific instructions for installations where panels close onto a wall.
Due to the highly visual nature of this guide, it is recommended to consult the original PDF for detailed diagrams illustrating each step and part placement. Pay close attention to measurements and orientation indicated in the diagrams.
General Installation Notes:
- Ensure all parts are present before starting.
- Follow the sequence of steps carefully.
- Use the provided Allen key kit (27) for tightening screws.
- Some steps may vary based on whether a towel bar is included or if the installation is on a flat wall.
- The document indicates reversible doors and options for panels with or without towel bars.
- Specific measurements for door widths (e.g., 48", 54", 60", 72") and corresponding installation ranges are provided for different configurations (e.g., corner, bathtub).
- Adhesive seals (Joint collant) are used to ensure water tightness.
Home - Zitta Group