Victron Energy Inverter RS 48/6000 Smart
www.victronenergy.com
Key Features
The Victron Energy Inverter RS 48/6000 Smart is a powerful and efficient inverter designed for demanding applications. It boasts a lightweight design, high frequency technology, excellent efficiency, low standby power, and quiet operation.
[Image of the Victron Energy Inverter RS 48/6000 Smart unit]
Display and Bluetooth
The inverter features a display that shows battery and inverter parameters. These parameters are also accessible via a smartphone or other Bluetooth-enabled device. Bluetooth connectivity allows for system setup and settings adjustments using the VictronConnect app.
VE.Can and VE.Direct Port
The VE.Can port enables connection to a GX device for system monitoring, energy metering, data logging, and remote firmware updates. The VE.Direct port facilitates remote data monitoring when connected to a GlobalLink 520.
I/O Connections
Programmable relay, temperature sensor, and voltage sensor connections are available. The remote input can be configured to accept the Victron smallBMS.
[Image showing the VictronConnect app interface on a smartphone, displaying battery and inverter parameters, and a second image showing a smartphone connected to the inverter via Bluetooth]
Configuration and monitoring with VictronConnect: A built-in Smart Bluetooth connection allows for quick monitoring or settings adjustment of the Inverter RS.
Technical Specifications
| Feature | Inverter RS Smart 48/6000 | Specifications |
|---|---|---|
| INVERTER | ||
| DC Input voltage range | 38-62 V (4) | |
| Output | Output voltage: 230 VAC ± 2% Frequency: 50 Hz ± 0.1% (1) Maximum continuous inverter current: 25 A AC Increases linearly from 4800 W at 46 VDC to 5300 W at 52 VDC |
|
| Continuous output power at 25 °C | 4800 W | |
| Continuous output power at 40 °C | 4500 W | |
| Continuous output power at 65 °C | 3000 W | |
| Peak power | 9 kW for 3 seconds | |
| Short-circuit output current | 7 kW for 4 minutes | |
| Maximum efficiency | 50 A | |
| Zero load power | 96.5% at 1 kW load 94% at 5 kW load 20 W |
|
| CHARGER | ||
| Programmable AC system voltage range (VDC) | 36-60 V | |
| Charge voltage 'absorption' (VDC) | Default setting: 57.6 V (adjustable) (6) | |
| Charge voltage 'float' (VDC) | Default setting: 55.2 V (adjustable) (6) | |
| Maximum AC coupled solar charging power | 5000 W (5) | |
| Maximum charge current | 88 A @ 57.6V | |
| Battery temperature sensor | Included | |
| Battery voltage sense | Yes | |
| GENERAL | ||
| Parallel and 3-phase operation | 12 parallel units supported, 3 phase supports 4 units per phase | |
| Programmable relay (3) | Yes | |
| Protection (2) | a-g | |
| Data Communications | ||
| Bluetooth frequency & power | 2402-2480 MHz, 4dBm | |
| General purpose analogue/digital in port | Yes, 2x | |
| Remote on-off | Yes | |
| Operating temperature range | -40 to +65 °C (fan assisted cooling) | |
| Maximum altitude | 2000 m | |
| Humidity (non-condensing) | max 95% | |
| ENCLOSURE | ||
| Material & Colour | steel, blue RAL 5012 | |
| Protection category | IP21 | |
| Battery-connection | M8 bolts | |
| 230 VAC-connection | Screw terminals 10 mm² (6 AWG) | |
| Weight | 11 kg | |
| Dimensions (hxwxd) | 425 x 440 x 125 mm | |
| STANDARDS | ||
| Safety | EN-IEC 60335-1, EN-IEC 62109-1, EN-IEC 62109-2 | |
| Emission, Immunity | EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3 IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3 |
|
Notes:
- (1) Can be adjusted to 60 Hz.
- (2) Protection key: a) output short circuit, b) overload, c) battery voltage too high, d) battery voltage too low, e) temperature too high, f) 230 VAC on inverter output, g) Solar earth leakage.
- (3) Programmable relay which can be set for general alarm, DC under voltage or genset start/stop function. DC rating: 4 A up to 35 VDC and 1 A up to 70 VDC.
- (4) Minimum start-up voltage is 41 V. Inverter shutdown can be set as low as 32 VDC but may shut down on low AC output voltage (due to load). Over-voltage disconnect is 65.5 V.
- (5) AC coupled solar charging requires an external PV inverter to be connected on a circuit at the AC output of the Inverter RS.
- (6) Connectivity to the Victron VM-3P75CT energy meter must be made via VE.Can, Ethernet connectivity is not currently supported.
