Gaabor Air Fryer AF40M-BK01A Operation Manual

Manufacturer Information

Manufacturer: UNITED GAIN LIMITED

Entrusting party: HANGZHOU GLOBAL JET ECOMMERCE CO.,LTD

Address: 1-1407, 501 2nd Avenue, QianTang New Area, Hangzhou. P.R.China

Telephone: 0571-88269187

Origin: Made in China

Please read this manual carefully before using the product and keep it properly for future reference.

Precautions

Dangerous

1. As there are electronic elements and heating elements in the housing, do not immerse the housing in water or wash it under the tap.
2. Do not let water or other liquids enter the product to avoid electric shock.
3. Please always place the ingredients in the fryer to avoid touching the heating elements.
4. Do not cover the air inlet and outlet when the product is working.
5. Do not pour oil into the fryer to avoid fire.
6. Do not touch the inside of the product when it is working.

Warning

1. This product is not intended for using by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
2. Please check whether the voltage marked on the product is consistent with the local power supply voltage before connecting the product to the power supply.
3. Do not use this product if the plug, power cord or product itself is damaged.
4. When the power cord is damaged, it must be replaced by professionals from the manufacturer, its maintenance department or similar departments to avoid danger.
5. Please take care of children to ensure that they do not play with this product. Do not wash or maintain it by children under the age of 8.
6. Please place the product and its power cord out of the reach of children under 8 years old when the product is stopped or cooling down.
7. Do not let the power cord touch the hot surface.
8. Do not hold the product plug or operate the control panel with wet hands.
9. The product must be plugged into a grounded socket and must be properly plugged in.
10. Do not connect this product to an external timer to avoid danger.
11. Do not place the product on or near flammable materials such as tablecloths and curtains.
12. Do not place the product against the wall or other products. At least 10 cm space shall be reserved at the back, sides and top of the product. Do not place objects above the product.
13. Do not use this product for any purpose other than those described in this manual.
14. The product must be supervised when used.
15. High temperature steam will be released from the air outlet when the air fryer is working. Please keep your hands and face at a safe distance from the steam and air outlet, and pay attention to high temperature steam and hot gas when moving the air fryer away from the product.
16. The accessible surfaces of the product may become very hot during operation.
17. Please unplug the power supply immediately when the product emits black smoke, and remove the fryer from the product after the product stops smoking.

Caution

1. Please place the product on a horizontal, flat and stable surface.
2. This product is only for home use, and shall not be used in the staff canteen of shops, offices, farms or other working environments, nor by guests in hotels, motels, places providing accommodation and breakfast, or other living environments.
3. Improper use of this product or its use for professional or semi-professional purposes, or its use not in accordance with the instructions in this manual, will not apply to the warranty, and we will not be responsible for such damage.
4. Please be sure to unplug the product after use.
5. Please make sure to allow the product to cool for approximately 30 minutes before handling or cleaning the product.
6. Please ensure that the ingredients cooked in this product are cash yellow, not black or brown. The charred part should be discarded.
7. This product has a built-in microswitch. When the fryer is pulled out during use, the machine will automatically turn off the power.

Safety Features

Overheating Protection

This product is equipped with an overheat protection system. When the internal temperature control system fails, the overheat protection system will automatically turn on. The product can no longer be used at any time. Please unplug the plug first.

1) Please send the product to professional maintenance personnel for repair after it has completely cooled down before reuse.

Electromagnetic Field (EMF)

This product complies with relevant standards on electromagnetic field (EMF). According to the current scientific proof, the product is safe if used correctly and operated according to the instructions in this manual.

Technical Parameters

Packing List

Product Parts Description

The air fryer consists of the following main parts:

• Air Inlet: Located at the bottom, this is where air is drawn into the unit.
• Timer knob: Used to set the cooking time.
• Air outlet: Located at the top, this is where hot air is expelled.
• Grill: A rack placed inside the pot to hold food.
• Holder: The handle used to pull out the pot.
• Pot: The removable basket where food is placed for cooking.

Electrical Schematic Diagram

The electrical schematic shows the internal components and their connections:

• L (Line), E (Earth), N (Neutral): Power supply connections.
• Timer: Controls the cooking duration.
• Snap action thermostat: A temperature-sensitive switch.
• Motor: Likely drives a fan for air circulation.
• Temperature fuse: A safety device that cuts power if temperature exceeds limits.
• Heater: The element that heats the air.

Operation Method

1. Before First Use

1. Remove all packaging materials, including those inside the fryer.
2. Please remove the adhesive or label from the product.
3. Clean the fryer and grill thoroughly with hot water, detergent and a non-abrasive sponge. Note: You can also use the dishwasher to clean these parts.
4. Please wipe the inside and outside of the product with a damp cloth.

CAUTION: This air fryer is heated by hot air. Do not pour oil or grease in the fryer.

2. Preparation for Use

1. Place the product on a stable, level and flat surface. Do not place the product on a heat resistant surface.
2. Place the grill properly in the fryer.
3. Push the fryer into the product correctly. Note: The fryer must be correctly placed in the product, otherwise the product will not work!
4. Pull out the wire and insert it into the wall socket that has been grounded.
5. Do not pour oil or other liquids into the fryer.
6. Do not place objects above the product.
7. Do not place anything on the air inlet at the bottom, which will block the airflow and affect the heating effect of hot air.

3. Use of the Product

Note: Do not touch the fryer for a short time after use when it is hot. Please hold the holder to move the fryer.

1. Insert the power cord plug into a grounded outlet.
2. Carefully pull the fryer out of the air fryer.
3. Put the ingredients into the fryer basket. Note: Do not put more ingredients than the MAX indicator or more than the amount shown in the table below, as this may affect the frying quality.
4. Push the fryer back into the air fryer. Do not use the fryer without the basket. If heating product without the fryer basket, open the drawer using oven mitts. The edges and inside of the drawer will become very hot.
5. Adjust the temperature control knob (this operation is not required for products that are not temperature adjustable) to the desired temperature.
6. The time control button determines the desired food preparation time.
7. Press the Start/Confirm button to power on the product.

Preheating: If necessary, you can preheat the product without adding ingredients. Set the time for more than 5 minutes, wait for the heating indicator light to go out (about 5 minutes later), and then adjust the timer knob to the desired cooking time.

• The heat indicator light will come on at this time.
• The time will count down from the set cooking time.
• The hot air frying process is in progress.
• Excess oil from ingredients will collect at the bottom of the fryer.

8. Confirm the required time and temperature for cooking the ingredients, press the button on the control panel to adjust the time and temperature to the required temperature and time for cooking the ingredients.

• Note: When you set the time to half the cooking time, you must set the time again for the remaining cooking time after flipping.
• Note: When you set the time to the full cooking time, the timer will not ring until the set cooking time is completed. You can draw out the fryer at any time during the cooking process to check the food. The power supply will automatically turn off after you draw out the fryer and turn on automatically after the fryer is put into the product again. (In this case, the timer is always counting down.)

9. When the timer rings, the set cooking time is reached. Pull the fryer out of the product and place it on a heat-resistant surface.

Note: You can also turn off the product manually. To do this, turn the temperature control knob to 0. (This operation is not required for products that are not temperature adjustable)

10. Check that the ingredients are cooked. If the ingredients are not fully cooked, just push the fryer back into the product and adjust the heating time for an additional few minutes.

11. For smaller ingredients (such as French fries), remove the fryer basket from the bottom of the pan and fry. Do not invert the fryer basket while it is still attached to the fryer, otherwise residual oil from the bottom of the fryer will leak into the ingredients. The fryer and ingredients after frying with hot air are still very hot. Depending on the type of ingredients in the air fryer, steam may be released from the fryer.

12. Spoon the ingredients from the fryer basket into a serving dish.

Tip: When it is necessary to take out large or fragile ingredients, you can use a clip to clip them out of the fryer basket.

13. The air fryer can start cooking the next batch of ingredients at any time after the cooking of one batch of ingredients is completed.

Cleaning and Maintenance

The product should be cleaned immediately after each use.

The fryer, grill and product interior are covered with a non-stick coating. Do not use metal kitchen utensils or abrasive cleaning materials for cleaning to avoid damaging the non-stick coating.

1. Remove the power plug from the electrical outlet and cool the product. Note: Remove the fryer to allow the air fryer to cool down faster.
2. Wipe the exterior of the product with a damp cloth.
3. Wash the fryer and grill with hot water, detergent and a non-abrasive sponge. You can use a degreaser to wash away any remaining dirt. Note: The fryer and grill can be cleaned in the dishwasher.

   Tip: If dirt sticks to the grill, or the bottom of the fryer, add hot water to the fryer and some detergent. Place the grill in the fryer and let the fryer and grill soak for about 10 minutes.

4. Clean the inside of the product with hot water and a non-abrasive sponge.
5. Clean the heating element with a cleaning brush to sweep away food residue.