User Guide for Rapsodo models including: PITCHING 2.0 Baseball Pitch Design and Tracking Software, PITCHING 2.0, Baseball Pitch Design and Tracking Software
1. Create a coach account at cloud.rapsodo.com 2. download 'Rapsodo pıtchıng' app 3. set up the monıtor and the rce 4. paır the rce and the app
1. Create a coach account 2. download. at cloud.rapsodo.com. 'Rapsodo pıtchıng' app. 3. set up the monıtor and the rce. Go to the Apple App Store and search for Rapsodo.. View
| Rapsodo
File Info : application/pdf, 2 Pages, 302.43KB
DocumentDocument1. Create a coach account 2. download at cloud.rapsodo.com 'Rapsodo pitching' app 3. set up the monitor and the rce Go to the Apple App Store and search for Rapsodo PITCHING 2.0 4. pair the rce and the app Turn on both the RCE and Monitor and connect to Rapsodo WiFi in your device settings 15'6'' App Requirements: iOS 10.3 or later iPad Air 2 or newer This will be your username and password to login to both the cloud and applications The ''Guest'' account is the default setting and has limited data. To track pitches and have complete data access be sure to create and activate a player profile Using the provided measuring tape, place the front of the tank 15'6" from the FRONT of home plate ! When connected to the Rapsodo WiFi the iPad will say `'No Internet Connection`' 5. calibration DISPLAYs MAINTENANCE Connect the RCE to the application and calibrate the monitor. To calibrate the monitor have a person stand on the center of the pitching rubber. The red line in the azimuth view should go directly down the middle of the pitching rubber RED Not ready GREEN Data ready, monitor ready GREEN Successfully Connected to RCE through USB RED Not connected to RCE, Waiting for USB Sync BLUE Processing data (wait for green light to hit again) The monitor and RCE must be charged separately to ensure a complete charge for each device. AMBER Charging (switched off) GRAY Off USB Cables Charger Battery Power Monitor Connection to App RCE and Monitor Connected RCE and monitor connected to application, needs Calibrated or on `Pause Mode' Federal Communication Commission (FCC) Interference Statement The FCC Interference Statement can be found on our website, www.rapsodo.com/fcc Ready to record data Data Processing ! Angles should be as close to 0 degrees and 14 degrees as possible RCE switched off and charging Warning for low battery, please recharge monitor RCE turned on, not connected to app and monitor RCE turned on, connected to app but not the monitor PITCHING 2.0 QUICK START GUIDE www.rapsodo.com support@rapsodo.com For additional user information download the PITCHING 2.0 user manual at www.rapsodo.com/downloads