User Manual for STEED models including: R72, 2A7MA-R72, 2A7MAR72, R72 Bluetooth Speaker, Bluetooth Speaker, Speaker
Shenzhen Steed Technology Co., Ltd R72 2A7MA-R72 2A7MAR72 r72
Buttons and interfaces Turn ON/OFF: Press and hold for 3 seconds Play / Pause button Mode: Short press for switch mode, Long press for TWS mode Next / Vol +: Short press for next, Long press for Vol + Previous / Vol - : Short press for previous,Long press for Vol DC 5V input Aux in Indicator Product parameters Bluetooth version Operating range Channel Impedance Output power SNR Speaker unit Audio Battery capacity Play time Material Product size N.W 5.3 10m Double 4 2 x 5W 80dB Diameter 45mm MP3/WMA/WAV 1800mAh 4-6H Plastic 93 x 94 x 122mm 483g Always confirm that the temperature is 5°-40°c before you charge the battery. Please send it to professionals if there is something wrong. Do not overhaul by yourself. USER MANUAL Pairing Turn on the Bluetooth speaker by long press power button, blue LED light will flash rapidly, search on your Bluetooth device (phone, tablet or computer) and find "R72"to connect. You will hear a prompt "Connected", which means the speakers are successfully connected with your Bluetooth device. TWS function TWS feature allows you to pair two speakers together to create the ultimate surround sound experience. Connection method: open two R72 devices at the same time; enter the Bluetooth pairing mode, long press "Mode"Button, when you will hear "T Successful", it means paired successfully, you can connect your mobile phone to the Bluetooth speaker "R72".then enjoys your great sound. (Note: Do not use your mobile phone to connect Bluetooth speaker until the two speakers are paired.) Indicator 1. Blue light blinking fast: Ready to connect Blue light stays on: Connected successfully Blue light slow: Playing 2. Orange light stays on: Charging Orange light stays off: Charging completed After-sales warranty · 12 months upon date of purchase. · Warranty service only valid under normal use. All damage by man-made (Open the housing, tear off the sticker, un-normally using) it will be not guaranteed. Accessories USB charging cable AUX cable FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.Adobe Illustrator CC 22.0 (Windows) Adobe PDF library 15.00