EXOTON
User Manual for Exoton models including: EX-10A 10 Inch Professional Combo Speaker, EX-10A, 10 Inch Professional Combo Speaker, Professional Combo Speaker, Combo Speaker, Speaker
Manuals – EXOTON
File Info : application/pdf, 6 Pages, 1.46MB
DocumentDocumentEX-10A BARON SERIES 10 INCH PROFESSIONAL COMBO SPEAKER (ACTIVE & PASSTIVE) EX-10A BARON SERIES User's Manual EX-10A BARON SERIES 400W ACTIVE SPEAKER 400W PASSTIVE SPEAKER CONTENTS 1.0 IMPORTANT SAFETY INSTRUCTIONS ............................................................... 01 2.0 INTRODUCTION...................................................................................................... 02 2.1 ACTIVE & PASSTIVE SPEAKER ........................................................................... 02 2.2 FEATURES ............................................................................................................ 02 3.1 REAR PANEL(1) ................................................................................................... 03 3.2 REAR PANEL (2) ................................................................................................... 03 4.1 REAR PANEL DESCRIPTION .............................................................................. 04 5.1 DESCRIPTION OF WIRED MICROPHONE ................................................ 05 5.2 INSTRUCTION FOR SPEAKER TRIPOD ......................................................... 05 6.1 REMOTE CONTROL DESCRIPTION ..................................................................... 06 6.2 TIPS ON USING THE REMOTE CONTROL............................................................ 06 7.1 BLUETOOTH CONNECTION ................................................................................. 07 7.2 ACTIVE SPEAKER CONNECTS TO PASSIVE SPEAKER.................................... 07 8.1 EX-10A PRODUCT SIZE ....................................................................................... 08 9.1 PACKAGE CONTECTS ....................................................................................... 09 9.2 TROUBLESHOOTING ............................................................................................. 09 10.1 SERVICE AND REPAIR ....................................................................................... 10 10.2 WARRANTY INFORMATION .............................................................................. 10 10.3 CUSTOMER SERVICE AND TECHNICAL SUPPORT ....................................... 10 EXOTON preserves the right to improve or alter any information within this document without prior notice 1.0 IMPORTANT SAFETY INSTRUCTIONS The apparatus shall not be exposed to dripping or splashing and that no objects with liquids, such as vases, shall be placed on the apparatus. The MAINS plug is used as the disconnect device, the disconnect device shall remain readily operable. Warning: the user shall not place this apparatus in the can be easily accessible. area during the operation so that the mains switch 1. Read these instructions before operating this apparatus. 2. Keep these instructions for future reference. 3. Heed all warnings to ensure safe operation. 4. Follow all instructions provided in this document. 5. Do not use this apparatus near water or in locations where condensation may occur. 6. Clean only with dry cloth. Do not use aerosol or liquid cleaners. Unplug this apparatus before cleaning. 7. Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including . 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plug, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories manufacturer. by the 12. Use only with a cart, stand, tripod, bracket, or table by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip- over. 13. Unplug this apparatus during lighting storms or when unused for long periods of time. 14. Refer all servicing to service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED PERSONNEL The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product' magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: To reduce the risk of or electric shock, do not expose this apparatus to rain or moisture. CAUTION: Use of controls or adjustments or performance of procedures other than those may result in hazardous radiation exposure. 01 EXOTON 2.0 INTRODUCTION Congratulations on your purchase of the EX-10A Baron Series professional combo speaker.Baron Series speakers have an attractive and impact-resistant design. The angled molded enclosure is made of highly durable polypropylene and is designed for use as a stage monitor, standmounted speaker or for permanent installation. 2.1 ACTIVE & PASSTIVE SPEAKER All you need for a pro PA system setup is included: two 10" pro audio speakers delivering 400 watts of total power.The system includes a master active speaker that features the built in amplifier and a slave passive 10" speaker that is powered from the master speaker/amp. To complete this system, we provide speaker stands for mounting, a microphone, and all the necessary connection cables. This allows you to kick off your party right out of the box. The EX-10A is perfect for DJ applications, karaoke, and parties or for live music gigs. The EX-10A has a great Bluetooth integration, USB input, SD card input, and preset digital graphic equalizer effects. The ABS plastic polymer cabinet is time-aligned with the drivers so the system is optimized to deliver a massive amount of bass, clean mids, and clear highs. The main active unit features distortion control, allowing you to maintain control over the music. The system includes separate Bass and Treble controls, allowing you to customize and tailor your sound stage according to your preferences. There is also a built-in equalizer allowing you to adjust the sound to the style of music you are listening too. The built-in USB input and SD input are great options for playing back any of your stored music on USB or SD cards. The Bluetooth integration features the latest in BT protocol from the world leader in Bluetooth technology; CSR. Bluetooth is a great feature for powered pro audio speakers because it allows you to easily and wireless stream your music from any Bluetooth enabled MP3 player or phone. Also included in the MP3 section of the unit is a built-in FM radio. 2.2 FEATURES 400 Watts RMS 10" Woofer Mic / Line Balanced Preamp Switching Power Supply (115-230V, 50-60 Hz) Balanced XLR-type inputs with switched Mic/Line sensitivity and XLR-type LINK OUT 35mm socket on bottom for pole / stand mounting EQ: POP, ROCK, JAZZ, CLASSICAL, COUNTRY ,NORMAL 02 EX-10A BARON SERIES EXOTON 3.1 REAR PANEL (1) 4.1 REAR PANEL DESCRIPTION EXOTON 1 2 345678 1.SD SLOTInsert an SD card to read data 2.USB SLOTYou can play media files from a USB device by connecting the device to this slot 3.PLAY/PAUSE BUTTONShort press to start or pause playback.Long press to enter the folder function. 4.MODE BUTTONPress to change modes between playing FM, USB, MP3 and Bluetooth. 5.LOOP MODEPress this button to adjust the audio looping settings 6. PREVIOUS TRACK BUTTON: Press to go to the previous track. Press and hold to decrease volume 7. NEXT TRACK BUTTONPress to go to the next track. Press and hold to increase volume 8. 6 EQ MODE SWITCH BUTTONPress to switch between 6 EQ modesPOP, ROCK, JAZZ, CLASSICAL, COUNTRY ,NORMAL 3.2 REAR PANEL (2) 1.MIC IN:This connector can either take a 1/4inch Jack balanced or an XLR balanced cabled microphone 2.LINE IN:For line signal input 3.LINE OUT:For line signal output 4.MP3 KONB :Control the MP3 input volume 5.MIC LEVEL:Control the microphone input volume 6.LINE LEVEL: Control the volume of line 7.VOLUME LEVEL :Control overall volume 8.TREBLE LEVEL :Control the TREBLE of line 9.BASS LEVEL :Control the BASS of line EX-10A BARON SERIES 4 1 5 6 2 7 3 8 9 EX-10A 03 3 1 2 1.IEC SOCKET Connect the supplied AC power cord here. Since Baron active speakers have built-in power amplifiers, you must connect them to an AC power supply or you won't get any sound. Note: lf you happen to leave the power cord behind at a gig, don't worry.The 3-pin plug with a ground pin is readily available at most office and computer supply stores. 2. POWER SWITCH To turn on the Baron active speaker, set the power switch to the on (l) position. To turn the Performer off, set the switch to the off (o) position. Make sure the volume control is turned down all the way before you turn the power on or off. 3. SPEAKON JACK Use a cable to plug into this jack to connect active and passive speakers. 04 EX-10A BARON SERIES EXOTON 5.1 DESCRIPTION OF WIRED MICROPHONE 2 1. Installation and removal of connecting cables 1 (1) Installation of connecting line: Counterclockwise rotation æ to open the Cannon plug; Press the button ç to push the XLR plug into the microphone; Release the button ç and rotate it clockwise æ to lock it; (2) Removal of the connecting line Counterclockwise rotation æ to open the Cannon plug; Press the button ç to pull the XLR plug out of the microphone; 2. Connect the microphone to the speaker Plug the other end of the microphone into the position shown on the right. 3. Instructions for using the microphone (1) Yelling may occur when covering the microphone head with your hand or holding the microphone close to the speaker. In this case, the first step is to reduce the volume. Next, increase the distance from the speaker. Finally, try repositioning the microphone away from the speaker. (2) When the microphone sensitivity is high, care must be taken to avoid dropping it from a height or subjecting it to strong impacts. (3)When not in use, the microphone should be stored in a dry, clean place. Avoid storing or using the microphone in high temperatures and humidity to prevent any adverse effects on sensitivity and timbre. 1 5.2 INSTRUCTION FOR SPEAKER TRIPOD 4 2 1.Steps for installing sound box support (1) Turn the knob on the bracket 2/3 counterclockwise, and 3 then adjust the bracket to a suitable height and tighten the lock clockwise. (2) Insert 1 into the bracket jack to fix. (3) Turn the knob 5 at the bottom of the speaker counterclockwise. (4) Align jack 6 at the bottom of the speaker with jack 1 of the support. After the installation is stable, lock the thick button 5 clockwise. EX-10A BARON SERIES 05 6.0 REMOTE CONTROL DESCRIPTION 1.MODE Press to change modes between playing FM, USB, MP3 or Bluetooth. 2.EQ Press to switch between 6 EQ modes POP, ROCK, JAZZ, CLASSICAL, COUNTRY ,NORMAL 3.Previous folder Switch to previous folder 4.Next folder Switch to next folder 5/6.VOL +/Adjust the volume 7.Previous track 8.Next track 9.Music play/pause 10. Song channel switching -- If the song number is between 10 and 99, press this button first, then press the song number to switch to that song. 11. Song channel switching --- If the song number is between 100 and 999, press this button first, then press the song number to switch to that song. 12.Number keys The remote control has 10 keys ranging from 0 to 9. In the music playing state, press the number key to enter the music it represents. For example, if the number "8" in your playlist is "8", pressing the "8" key will play the music represented by the number "8". Note: The included remote control has no battery. To ensure that the battery is not dangerous due to leakage, there will be no batteries in the remote control. Before using the remote control, you need to purchase the matching AAA battery. You can buy it easily at a nearby convenience store or store. The remote won't work unless you have the battery installed correctly in positive and negative directions! EXOTON MODE EQ -- --- 6.1 TIPS ON USING THE REMOTE CONTROL Please buy batteries and install them Certain conditions (such as indoor lighting, furniture that interferes with the signal path, or direct sunlight) can interfere with how the remote works. If the remote control isn't working: · Make sure the battery is installed correctly. · Point the remote directly at the right speaker, ensuring it receives the signal. · Dim the lights or reposition speakers to avoid direct sunlight. · Stay close to the system when using the remote. · If the issue persists, replace the battery in the remote control. 06 EX-10A BARON SERIES EXOTON 7.1 BLUETOOTH CONNECTION 8.1 EX-10A PRODUCT SIZE 1. Activate the BT-function on your device (Mobile phone, tablet etc.) from which you want to play the music. Refer to the device's operating instructions for guidance. 2. Press the "MODE" button and activate BT-function. 3. Select the Bluetooth name "EXOTON" on your device to connect. Attention: The Bluetooth range is approximately 10 meters without any barriers. 7.2 ACTIVE SPEAKER CONNECTS TO PASSIVE SPEAKER 18.27in EXOTON Plug the cable into the SPEAKER jack of the active and passive speaker to connect EX-10A BARON SERIES 07 08 11.42in 10.04in EX-10A BARON SERIES EXOTON 9.1 PACKAGE CONTECTS Active Speaker X1 Passive Speaker X1 Speaker Tripods X2 Power Cable X1 Remote Control X1 Wire Microphones X1 Speaker Cable X1 User Manual X1 9.2 TROUBLE SHOOTIN Refer to the chart below if the speaker does not function properly. If the issue you are facing is not listed, or if the provided instructions do not help resolve the problem, please disconnect the power cord and reach out to us immediately. Problem Cause Ensure that all audio source devices are powered on and functioning properly No power supply is provided even if the power plug is in the open position. The power plug is not securely connected or there is no safety connection. Attach the power plug firmly or reattach it securely. The connected socket is not energized. Replace energized sockets. No sound. The audio signal has not been connected to the audio source input interface behind the speaker. The audio source device is not enabled. The VOLUME control is set to 0. Connection error. Sound quality deteriorates. Loudspeaker failure. Poor contact. Sound level is too low. You are playing an underbass source. The volume control is set too low. The battery is not installed correctly. The remote control does not control the hoist. The remote control is too far from the speaker. Battery failure caused by long service time. Connect the audio signal correctly to the audio input interface behind the speaker. Ensure that all audio source devices are powered on and functioning properly. Turn the VOLUME control on clockwise. 1. Check whether the audio signal cable is correctly connected to the output port of the audio source device. 2. Check whether all the speakers on the speaker box are making sound. If there is no sound, contact us immediately. 3. Check whether the connector of the speaker is oxidized and whether the terminal of the speaker is loose. Change the correct audio source. Turn the volume control clockwise to a suitable level. Install the battery correctly. Shorten the distance between remote control and speaker Replace a new battery. EX-10A BARON SERIES 09 To purchase EXOTON other products , please contact us at support@exotonaudio.com Our other product list please visit: https://exotonaudio.comYou can also contact us directly through Amazon and we will help you find the item you want. 10.1 SERVICE AND REPAIR For spare parts, service and maintenance, please contact us at support@exotonaudio.com to purchase additional replacement parts or for other maintenance related matters.The company does not issue service manuals to users, and users are advised not to attempt any selfmaintenance. Because doing so would void all warranties. If you have any question,also can visit our website to find the answers: https://exotonaudio.com. 10.2 WARRANTY INFORMATION EXOTON is committed to providing the best warranty service for each product. From the date of original purchase, EXOTON provides a warranty of three months for any material or workmanship problems arising out of strict compliance with the instructions. EXOTON may repair the product within this warranty period. Please be sure to properly keep the "proof" of purchase products, so as to obtain warranty service. Products without purchase certificate will not be accepted for return, and warranty service. The warranty service is limited to problems arising from normal use. Users should strictly follow the instructions for correct use. Any wanton damage or unauthorized maintenance of the machine, accident, wrong use, human negligence, etc., will not be accepted by the warranty scope. In addition, the guaranteed repair is only valid for purchase in the Brand's Amazon store or brand website store. If you have other questions, please visit: https://exotonaudio.com. 10.3 CUSTOMER SERVICE AND TECHNICAL SUPPORT You are welcome to visit our website at https://exotonaudio.com. From this website, you can get answers to frequently asked questions, technical guidance, return instructions and other helpful information. We do our best to respond to your inquiry within one business day. EXOTON https://exotonaudio.com 10 EX-10A BARON SERIES