Technical Datasheet
SKU: CB104UNIMB
BASIN CLICKER MATT BLACK UNIVERSAL WASTE
TECHNICAL DRAWING
Diagram showing a basin clicker waste fitting with dimensions:
- Overall height: 65mm
- Diameter of the top flange: 63mm
- Height of the top section: 41mm
- Thread size: G 1/4
Dimensions are in millimetres except thread sizes which are BSP imperial.
NOTES
- The guarantee is subject to the product having been installed, used, and maintained in accordance with Imex instructions.
- All working parts (such as hinges, ceramic disks, cartridges, seals and cistern fittings), which are subject to normal wear and tear, are covered for 36 months from the proof of purchase date. Seats are covered for 12 months.
- The guarantee applies to the original purchaser and is non-transferable. The guarantee is only applicable in the UK and ROI.
- This does not affect statutory rights.
- Information provided is for guidance only and is non-binding. All measurements are approximate and subject to standard tolerances. Imex reserves the right to change product specifications without prior notification.