Product Liability Disclaimer-MEAN WELL Switching Power Supply Manufacturer
Owner's Manual for MEAN WELL models including: PLC-45 Series 45W Single Output LED Power Supply, PLC-45 Series, 45W Single Output LED Power Supply, Output LED Power Supply, Power Supply
45W PLC Series Constant Current LED Driver - Marvel Lighting
File Info : application/pdf, 3 Pages, 551.75KB
DocumentDocument45W Single Output LED Power Supply
PLC-45 series
User's Manual
SPECIFICATION
LPS
..
MODEL
PLC-45-12
PLC-45-15
PLC-45-20
PLC-45-24
PLC-45-27
PLC-45-36
PLC-45-48
OUTPUT
DC VOLTAGE
12V
15V
20V
CONSTANT CURRENT REGION Note.6 9 ~ 12V
11.25 ~15V
15 ~ 20V
RATED CURRENT
3.8A
3A
2.3A
CURRENT RANGE
0 ~ 3.8A
0 ~ 3A
0 ~ 2.3A
RATED POWER
45.6W
45W
46W
RIPPLE & NOISE (max.) Note.2 2Vp-p
2.4Vp-p
1.8Vp-p
VOLTAGE ADJ. RANGE Note.5 11.5 ~ 13V
14.5 ~ 16.2V 19.5 ~ 22V
CURRENT ADJ. RANGE Note.5 2.85 ~ 3.914A 2.25 ~ 3.1A
1.725 ~ 2.37A
VOLTAGE TOLERANCE Note.3 ±10%
LINE REGULATION
±3.0%
LOAD REGULATION
±5.0%
SETUP TIME
500ms / 230VAC 1200ms / 115VAC at full load
24V 18 ~24V 1.9A 0 ~ 1.9A 45.6W 2.7Vp-p 24 ~ 26V 1.425 ~1.957A
27V 20.25 ~27V 1.7A 0 ~ 1.7A 45.9W 2.7Vp-p 25 ~ 30V 1.275 ~ 1.75A
36V 27 ~ 36V 1.25A 0 ~ 1.25A 45W 3.6Vp-p 32.5 ~ 39V 0.938 ~ 1.288A
48V 36 ~ 48V 0.95A 0 ~ 0.95A 45.6W 4.6Vp-p 43.6 ~ 51.8V 0.713 ~ 0.979A
INPUT
VOLTAGE RANGE Note.4 90 ~ 264VAC 127 ~ 370VDC
FREQUENCY RANGE
47 ~ 63Hz
POWER FACTOR (Typ.)
PF>0.92/115VAC, PF>0.9/230VAC at full load (Please refer to "Power Factor Characteristic" curve)
TOTAL HARMONIC DISTORTION THD< 20% when output loading75% at 115VAC/230VAC input
EFFICIENCY (Typ.)
84.5%
85%
86.5%
86.5%
86.5%
87.5%
AC CURRENT (Typ.) INRUSH CURRENT (Typ.)
0.55A/115VAC 0.25A/230VAC COLD START 35A(twidth=50s measured at 50% Ipeak) at 230VAC
87.5%
MAX. No. of PSUs on 16A CIRCUIT BREAKER
42 units (circuit breaker of type B) / 42 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT
<0.75mA / 240VAC
OVER CURRENT SHORT CIRCUIT PROTECTION OVER VOLTAGE
95 ~ 110%
Protection type : Constant current limiting, recovers automatically after fault condition is removed
Hiccup mode, recovers automatically after fault condition is removed.
13.8 ~ 16V
17.5 ~ 21V
22.8 ~ 25V
28 ~ 32V
31 ~ 35V
41 ~ 46V
Protection type : Shut down o/p voltage, re-power on to recover
54 ~ 60V
OVER TEMPERATURE
WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT
Shut down o/p voltage, recovers automatically after temperature goes down -30 ~ +50 (Refer to "Derating Curve") 20 ~ 95% RH non-condensing -40 ~ +80, 10 ~ 95% RH ±0.03%/ (0 ~ 50)
VIBRATION
10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes
SAFETY STANDARDS
SAFETY & WITHSTAND VOLTAGE
EMC
ISOLATION RESISTANCE
EMC EMISSION EMC IMMUNITY MTBF
UL1310, TUV BS EN/EN61347-1, BS EN/EN61347-2-13, GB19510.14, GB19510.1, CAN/CSA C22.2 No. 223-M91(except for 48V), EAC TP TC 004 approved I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH
Compliance to BS EN/EN55015, GB17743, GB17625.1, BS EN/EN61000-3-2 Class C (75% load) ; BS EN/EN61000-3-3, EAC TP TC 020 Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55024,BS EN/EN61547, light industry level, criteria A,EAC TP TC 020
515Khrs min. MIL-HDBK-217F (25)
OTHERS NOTE
DIMENSION
181.5*62*35mm (L*W*H)
PACKING
0.41Kg; 30pcs/13.3Kg/0.67CUFT
Product Liability DisclaimerFor detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx
File Name:PLC-45-SPEC 2021-12-24
45W Single Output LED Power Supply
Mechanical Specification
181.5
PLC-45 series
Case No.991A Unit:mm
6.3
31 2.3
16.6
T case
90.75
62
2-R2.5
1
2-R9.0
1
16.3
2
2
3
6.3
T case: Max. Case Temperature.
35
Block Diagram
EMI FILTER
I/P
&
RECTIFIERS
FG
Derating Curve
Terminal Pin No. Assignment (TB1) : SWITCHLAB MB310-75003
Pin No. Assignment
1
AC/L
2
AC/N
3
FG
O.L.P.
POWER SWITCHING
PWM & PFC CONTROL
Terminal Pin No. Assignment (TB2) : SWITCHLAB MB310-75002
Pin No. Assignment
1
+V
2
-V
fosc : 90KHz(115VAC) 120KHz(230VAC)
RECTIFIERS
+V
& FILTER
-V
DETECTION CIRCUIT
O.V.P.
O.C.P.
Static Characteristics
100
80
60 50 40
20
-30 -25 -5
0
15
30
40
50
60 (HORIZONTAL)
AMBIENT TEMPERATURE ()
100 90 80 70 60 50 40
90 100 125 135 145 155 165 175 180 200 230 264
INPUT VOLTAGE (V) 60Hz
File Name:PLC-45-SPEC 2021-12-24
LOAD (%) LOAD (%)
PF EFFICIENCY (%)
Vo(%)
45W Single Output LED Power Supply
PLC-45 series
Power Factor Characteristic
1 .0 0 0 .9 8 0 .9 6 0 .9 4 0 .9 2 0 .9 0 0 .8 8 0 .8 6 0 .8 4 0 .8 2 0 .8 0 0 .7 8
50%
Constant Current Mode
60%
70%
80%
LOAD
90%
100% (45W)
230V 115V
EFFICIENCY vs LOAD (48V Model)
PLC-45 series possess superior working efficiency that up to 87.5% can be reached in field applications.
92 90 88 86 84 82 80 78 76 74 72 70 68 66 64 62 60 58 56 54 52 50 48
10% 20% 30% 40% 50% 60% 70% 80% 90% 100% LOAD
230V 115V
DRIVING METHODS OF LED MODULE
This LED power supply is suggested to work in constant current mode area (CC) to drive the LEDs.
100
75 (min.)
Constant Current area
In the constant current region, the highest voltage at the output of the driver depends on the configuration of the end systems. Should there be any compatibility issues, please contact MEAN WELL.
Hiccup Protection
50
100
Io (%)
Typical LED power supply I-V curve
File Name:PLC-45-SPEC 2021-12-24