InfiRay AFFO Series Quick Start Guide

Package Contents

• AFFO Series Thermal Imaging Monocular
• Micro HDMI video output data cable
• Type-C data cable
• Power adapter
• Neck strap
• Drawstring bag
• Lens cleaning cloth
• Quick Start Guide

The package includes the AFFO Series monocular, various cables, a power adapter, a neck strap, a drawstring bag, and a lens cleaning cloth.

Components and Controls

The monocular features the following components:

• 1. Eyeshade
• 2. Diopter adjustment
• 3. Down button
• 4. Menu (M) button
• 5. Up button
• 6. Power button
• 7. LED light
• 8. Objective lens
• 9. Lens cover
• 10. USB rubber cap
• 11. Power indicator
• 12. Type C port
• 13. Micro HDMI port

Getting Started

1. Open the lens cover (9).
2. Power on: Press and hold the Power (6) button for 2 seconds.
3. The device enters working status when an infrared image is displayed.
4. Rotate the diopter adjustment knob (2) to adjust the display icon resolution. This knob is for adjusting the eyepiece diopter for users with different degrees of myopia.
5. Setting the image mode: Briefly press the Up (5) button to select from five image palette modes: white hot (?), black hot (⚫), red hot (?), pseudo color (?), and target highlight (?). The icon on the top status bar updates in real-time.
6. Setting the display brightness: In the main menu, select the display brightness option to set the level from 1 to 5.
7. Digital Zoom: On the home screen, briefly press the M (4) button.
8. Photography: On the home screen, short press the Down (3) button to take a photo.
9. Video Recording: On the home screen, press and hold the Down (3) button to start video recording.
10. Power off: Press and hold the Power (6) button for 3 seconds to initiate the power-off sequence. Release the button when the countdown icon reaches 0. Do not disconnect power during data saving.
11. Standby: Briefly press the Power (6) button on the home screen to put the device in standby mode. Press it again to wake it up.

Main Menu Function

• Press and hold the M (4) button on the home screen to enter the menu interface.
• Use the Up (5) / Down (3) buttons to navigate through menu options.
• Menu navigation is cyclical.
• Short press the M (4) button to adjust parameters or enter submenus.
• In submenus, navigation is similar: use Up (5) / Down (3) to switch options and M (4) to confirm and return to the upper menu.
• Short press the Power (6) button in any menu interface to return to the previous menu.
• The menu automatically exits to the home screen after 15 seconds of inactivity.

Button Operation Summary

Charging

The AFFO series is powered by a built-in rechargeable Li-ion battery, offering up to 9.5 hours of operation. Fully charge the device before first use.

• Open the USB rubber cap (10).
• Connect the Type-C cable to the Type-C port (12) and the power adapter.
• Plug the adapter into a 110-240V socket.
• The power indicator (11) is red while charging and turns green when fully charged. It blinks red and green if the battery is not charging or if the temperature is too high/low.
• A charging icon appears on the display while charging.
• The battery icon turns red when the power is low.

Specifications

Detailed specifications for the AP13, AL19, and AL25 models are provided.

* Actual operation time depends on Wi-Fi usage and the built-in video recorder.

Improvements may be made to the design and software of this product to enhance its useful features.

Technical parameters may be improved without prior notice.

Update and InfiRay Outdoor APP

To improve product performance and user experience, software, parameters, and instructions are updated regularly. Users can download updates from the official website (www.infirayoutdoor.com).

The AFFO series supports APP technology for real-time image transmission, control, and updates via Wi-Fi connection to a smartphone or tablet.

Download and install the InfiRay Outdoor APP from the official website or your app store. You can also scan the QR code provided to download the APP.

Important Safety Information

Environmental Influences

• Never point the lens directly at intense heat sources like the sun or laser equipment, as the objective lens and eyepiece can act as a burning glass and damage internal components.
• Avoid touching metal surfaces (cooling fins) after exposure to sunlight or cold.

Ergonomics Notes

• Take breaks after prolonged use to prevent wrist pain.

Risk of Swallowing

• Keep the device away from small children. Incorrect handling can cause small parts to become loose and be swallowed.

Safety Instructions for Use

• Handle the device with care; rough handling can damage the internal battery.
• Do not expose the device to fire or high temperatures.
• Do not disassemble the device to access the battery. The battery is not user-replaceable.
• Charge the device only at temperatures between 0°C and 40°C.

User Information on Disposal of Electrical and Electronic Devices

Products marked with the WEEE symbol (2012/19/EU) must not be disposed of as unsorted municipal waste in the EU. Return this product to your local supplier for proper recycling upon purchase of equivalent new equipment, or dispose of it at designated collection points. For more information, visit www.recyclethis.info.

Intended Use

The device is intended for nature observation, remote hunting observation, and civilian use for displaying heat signatures. It is not a toy for children. Use the device only as described in this manual. The manufacturer and dealer are not liable for damages arising from non-intended or incorrect use.

Function Test

• Before use, ensure the thermal imaging monocular has no visible damage.
• Test if the monocular displays a clear, undisturbed image.
• Check if the settings for the thermal imaging monocular are correct.

Legal and Regulatory Information

• Wireless transmitter module frequency range: WLAN: 2.412-2.472GHz (For EU)
• Wireless transmitter module power: <20dBm (only for EU)
• CE, UK, CA markings
• IRay Technology Co., Ltd. declares that the AFFO series thermal imaging monocular complies with directives 2014/53/EU and 2011/65/EU. The full EU declaration of conformity and additional information are available at www.infirayoutdoor.com.
• This device may be operated in all EU member states.
• Regulatory Information USA
• FCC ID: 2AYGT-AFFO
• Labeling requirements: This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
• Information to the user: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
• Note: The manufacturer is not responsible for radio or TV interference caused by unauthorized modifications. Such modifications could void the user's authority to operate the equipment.
• Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.

Body-worn Operation

This device was tested for typical body-support operations. To comply with RF exposure requirements, a minimum separation distance of 0.5cm must be maintained between the user's body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used with this device should not contain any metallic components. Body accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.

IRay Technology Co., Ltd. declares that this product was tested conforming to applicable FCC rules under the most accurate measurement standards possible, and that all necessary steps have been taken to assure that production units of the same equipment will continue to comply with the Commissions requirements.