Owner's Manual for Mikster models including: NTHD-01 PHARM Radio Temperature and Humidity Sensor, NTHD-01 PHARM, Radio Temperature and Humidity Sensor, Humidity Sensor

doc2pdf

NTHD-01 PHARM Radio temperature and humidity sensor

User manual

Netino Pharm System


File Info : application/pdf, 1 Pages, 338.03KB

PDF preview unavailable. Download the PDF instead.

Netino-NTHD-01-PHARM-en
NTHD-01 PHARM Radio temperature and humidity sensor

DESCRIPTION:
NTHD-01 PHARM sensor enables continuous recording of temperature for up to 136 hours with a recording frequency every 1 minute. The sensor's registration can be read via the NRU-20 PHARM+ radio logger connected to a computer with installed software Loggisoft" software. The built-in LCD display makes the device easy to operate device and enables local 1isualization of the measurements. Its use to recommended in places where installation is difficult or inadvisable, and there are no difficult environmental conditions (high humidity/dust) e.g. in pharmacies, clinics, hospitals.
Dimensions:

Power
Antenna
Registration: Display:

Technical data
3.6 v AA 2.6 AA replaceable lithium battery permanently mounted external one, height 90 mm 4,608 samples/channel
LCD 4 digits dedicated

Temperature measuring range:
Temperature measurement error:
Temperature measuring resolution: Humidity measuring range:

-30 ÷ 70
±0.3  in the range of 0  to 25  ±0.5  in other ranges 0,1
0%RH to 100% RH

Humidity measuring error: Humidity measuring resolution:

 ±3% RH w zakresie 0% ÷ 80%RH  ±5% RH w zakresie 80% ÷ 100%RH
1% RH

Communication:

868.4 MHz radio

Measuring element:
Measurement channels: Operating conditions:
External dimensions Weight Fixing Degree of protection

internal digital sensor option to connect a dedicated, external temperature or temperature and humidity probe (sold separately) two internal (temperature and humidity) Expandable by a further 2 using an external probe temperature: ­30°C to 70 °C humidity: 0% RH to 99% RH (no condensation) Installation data 71 x 71 x 27 mm (w x h x d) without antenna
80 g (net) You can hang it or put in on the ground
IP 20

Connecting an additional probe:

v1.1
www.mikster.com.pl MIKSTER Sp. z o.o. 41-250 Czelad, ul. Wojkowicka 21, tel. 32 763 77 77 fax: 32 763 75 94 email: info@mikster.pl



References

Microsoft Word 2016