SILVERCREST Milk Frother SMSP 500 A1

Welcome

Thank you for choosing the SILVERCREST Milk Frother. This manual provides essential information for safe operation and optimal use of your new appliance.

Please read this manual carefully before first use and keep it for future reference. It is an integral part of the product.

Symbols on the Appliance:

• A symbol indicating that high-quality materials do not alter the taste or smell of food.
• A symbol indicating that marked appliance parts are not dishwasher-safe.

Intended Use

The milk frother is exclusively designed for frothing milk (hot or cold) or heating milk. It is intended for domestic use only and must be used indoors. This appliance is not suitable for commercial use.

Foreseeable Misuse:

• [WARNING] Risk of material damage: Always operate the milk frother with the whisk (3); otherwise, the milk may burn.
• Never fill the jug (5) with liquids other than cold milk.

Safety Instructions

The following warnings are used throughout this manual:

• [DANGER] High Risk: Non-compliance can cause severe injury or death.
• [WARNING] Medium Risk: Non-compliance can cause injury or serious material damage.
• [CAUTION] Low Risk: Non-compliance can cause minor injuries or material damage.
• [NOTE]: Important facts and particularities to consider when handling the appliance.

General Safety Precautions:

• This appliance can be used by children aged 8 years and above, and by persons with reduced physical, sensory, or mental capabilities or lack of experience/knowledge, if supervised or instructed on safe use and understand the resulting hazards.
• Children must not play with the appliance.
• Cleaning and user maintenance must not be performed by children unless they are 8 years or older and supervised.
• Keep children under 8 years away from the appliance and its power cord.
• Improper use can lead to injuries.
• The jug, base, power cord, and plug must not be immersed in water or other liquids.
• The appliance is also intended for use in household and household-like environments, such as staff kitchens in shops, offices, agricultural holdings, hotels, motels, and bed & breakfasts.
• This appliance is not intended to be operated by means of an external timer or separate remote control system.
• Do not fill the appliance beyond the MAX fill level, otherwise hot milk foam may splash out.
• Use the milk frother only with the supplied base.
• Ensure no liquid spills onto the appliance's connection.
• The heating element surface remains hot after use.
• Always unplug the appliance from the mains when unattended and before assembly, disassembly, or cleaning.

Electrical Safety:

• If the power cord is damaged, it must be replaced by the manufacturer, its after-sales service, or a similarly qualified person to avoid hazards.
• Plug the power plug only into a properly installed, easily accessible socket with protective contacts, matching the voltage on the rating plate. The socket must remain easily accessible after connection.
• Avoid damaging the power cord on sharp edges or hot surfaces. Do not wrap the power cord around the appliance.
• The appliance is not completely isolated from the mains even after switching off; unplug the power plug to disconnect.
• Ensure the power cord is not pinched or crushed during use.
• To unplug, always pull the plug, never the cord.
• Unplug the appliance: in case of a fault, when not in use, before cleaning, during thunderstorms.
• Do not make any modifications to the appliance to avoid hazards.

Burn Hazard:

• [DANGER] Burn Hazard: Always operate the milk frother with the lid on, otherwise hot milk foam may splash out.
• The milk frother becomes hot during operation; grasp it only by the handle.

Material Damage Warning:

• [WARNING] Risk of material damage: The appliance has non-slip silicone feet. Due to various furniture finishes and treatments, it's possible some substances may affect the silicone feet. Use a non-slip mat if necessary.
• Fill the appliance with at least 75 ml of milk, above the MIN mark (10), to prevent milk from burning and the appliance from overheating.
• It is strictly forbidden to pour liquids other than cold milk into the milk frother.
• Allow the appliance to cool for approx. 3 minutes before reusing it.
• To prevent milk from burning and the appliance from overheating, never use the appliance without the whisk mounted.
• Place the appliance on a stable, level surface.
• Do not use any acidic or abrasive cleaning agents.

Child Safety:

• [DANGER] Danger for children: Packaging material is not a toy. Keep plastic bags away from children as they pose an asphyxiation risk.
• Keep children away from the appliance and its power cord.

Animal Safety:

• [DANGER] Danger for and from domestic and farm animals: Electrical appliances can pose hazards to animals. Animals can also damage the appliance. Keep animals away from electrical appliances.

Moisture Hazard:

• [DANGER] Risk of electric shock due to moisture: Protect the appliance from moisture, drops, and splashes. Non-compliance risks electric shock. If liquid enters the base, immediately unplug the power plug and have the appliance checked before reuse.

Drop Hazard:

• [DANGER] Risk of electric shock: Do not operate the appliance if it or the power cord shows visible damage, or if the base has been dropped.

Parts Included

The following items are included:

• 1 x Lid
• 1 x Whisk (3)
• 1 x Jug (5)
• 1 x Base with connection cord (8)
• 1 x Complete user manual (available online)
• 1 x Quick start guide

Getting Started

[DANGER] Risk of electric shock: Connect the power plug (8) only to a properly installed, easily accessible socket with protective contacts, matching the rating plate. The socket must remain easily accessible after connection. Unplug the power plug (8) after each use.

• Remove all packaging material.
• Check if all parts are present and undamaged.
• Clean the appliance before first use! (See "Cleaning" on page 24).
• Attach the whisk (3) to the drive shaft (6).
• If necessary, fully unwind the connection cord (8) and route it through the recess in the base (9).
• Place the appliance on a dry, level, non-slip surface.

Operation

Cleaning

[DANGER] Risk of electric shock: Unplug the power plug (8) from the socket before cleaning the milk frother. The jug (5), base (9), connection cord, and power plug (8) must not be immersed in water or other liquids.

[DANGER] Burn Hazard: The inside of the jug (5) becomes hot during operation. Allow the jug (5) to cool before cleaning.

[WARNING] Risk of material damage: Do not use any acidic or abrasive cleaning agents.

First Cleaning / Thorough Cleaning:

[NOTE]: If the spiral detaches from the plastic bar when removing the whisk (3), simply press it back into place (plug-in connection).

1. Remove the whisk (3) from the jug (5). Clean the lid (1), whisk (3), and the inside of the jug (5) by hand with warm water and dish soap. Wipe the inside of the jug with a soft cloth. Rinse thoroughly with clean water and dry the parts.
2. Wipe the base (9) exclusively with a slightly damp cloth.
3. Clean the exterior of the jug (5) with a damp cloth. You can also use a little dish soap. Wipe clean with a clean cloth dampened with clean water.
4. Allow all parts to dry completely before reassembling them.

Cleaning After Each Use:

Clean the inside of the jug (5) after each use, once it has cooled down.

1. Leave the whisk (3) mounted in the jug (5). Fill with water and a little dish soap up to the MAX mark (11) (150 ml).
2. Start Program 1 and let it run for approx. 10 seconds.
3. Remove the jug (5) from the base (9) and empty the water.
4. Rinse with clean water.

Storage

[DANGER] Child Safety: Store the appliance out of the reach of children.

• Allow the appliance to cool and clean it before storing.
• Figure B: Wrap the connection cord (8) in the cable winder (20) at the bottom of the base (9) in the direction of the arrow.

Disposal

This product is subject to the European Directive 2012/19/EU. The symbol of the crossed-out wheeled bin means that, in the European Union, the product must be collected separately from household waste. This applies to the product and all accessories marked with this symbol. Products bearing this symbol must not be disposed of with normal household waste but must be deposited at a collection point responsible for recycling electrical and electronic equipment.

This recycling symbol identifies, for example, an object or material parts as valuable for recovery. Recycling helps reduce raw material consumption and protect the environment. Information on disposal and the location of the nearest recycling center can be obtained from your local waste management authority or in the Yellow Pages.

Packaging: When disposing of packaging, observe the relevant environmental regulations in your country.

Disposal in Germany: In Germany, distributors of electrical and electronic equipment and food retailers are obliged to take back products. LIDL offers return options directly in its branches and stores. Return and disposal are free of charge. When purchasing a new appliance, you have the right to return a corresponding old appliance free of charge. You also have the option to return up to three old appliances free of charge, regardless of purchasing a new appliance, provided they are no larger than 25 cm in any dimension.

Please delete all personal data before returning.

Please remove batteries or accumulators not enclosed by the old appliance, as well as lamps that can be removed without destruction, and dispose of them separately before returning.

Troubleshooting

If your appliance is not functioning as expected, first go through this checklist. It may be a minor problem that you can resolve yourself.

[DANGER] Risk of electric shock: Never attempt to repair the appliance yourself.

Technical Specifications

Model: SMSP 500 A1

Mains Voltage: 220 – 240 V ~ 50/60 Hz

Protection Class: I

Power: 500 W

Milk Capacity:

• Heating: min. 75 ml – max. 300 ml
• Frothing: min. 75 ml – max. 150 ml

[NOTE]: No user action is required to switch the product between 50 and 60 Hz. The product adapts to both 50 and 60 Hz.

Symbols Used:

• [GS Certified]: Tested Safety: Appliances must comply with generally recognized engineering rules and the Product Safety Act (ProdSG).
• [CE Marked]: With the CE marking, HOYER Handel GmbH declares conformity with European Union regulations.
• [Recycling Symbol]: This symbol serves as a reminder to dispose of packaging environmentally friendly.
• [Recycling Symbol with Number/Code]: Recyclable materials are marked with the recycling symbol (3 arrows). The material can be specified by the recycling number in the middle (here: 21) and/or a code (here: PAP).
• Alternating Voltage Symbol: This is a recyclable product subject to extended manufacturer responsibility and waste separation.

Technical modifications reserved.

Warranty

Warranty Conditions:

The warranty period begins on the date of purchase. Keep the original sales receipt as proof of purchase.

If a material or manufacturing defect occurs within three years of the purchase date, the product will be repaired or replaced free of charge at HOYER Handel GmbH's discretion. This warranty service requires presentation of the defective appliance and the proof of purchase (sales receipt), along with a brief written description of the defect and when it occurred.

If the defect is covered by our warranty, you will receive the repaired or a new product back. Repair or replacement of the product does not start a new warranty period.

Spare parts essential for the product's use are available during the warranty period.

Warranty Period and Legal Claims for Defects:

The warranty period is not extended by its application. This also applies to replaced and repaired parts. Any damage and defects present at the time of purchase must be reported immediately after unpacking. Repairs after the warranty expires are subject to a charge.

Scope of Warranty:

The appliance has been manufactured according to strict quality guidelines and thoroughly checked before delivery. The warranty covers material or manufacturing defects.

Excluded from the warranty are wear parts subject to normal wear and tear, and damage to fragile parts, e.g., switches, light sources, or other glass parts.

This warranty is void if the product is damaged, not used or maintained correctly, used for commercial purposes, or if unauthorized modifications are made.

Warranty Claim Process:

For prompt processing of your request, please follow these instructions:

• For all inquiries, please have the article number IAN: 482036_2410 and the sales receipt as proof of purchase ready.
• The article number can be found on the rating plate, an engraving, the title page of your manual (bottom left), or as a sticker on the back or underside of the appliance.
• If functional errors or other defects occur, first contact the Service Center listed below by phone or email.
• For a product identified as defective, you can then send it postage-free to the provided service address, along with the proof of purchase (sales receipt) and a description of the defect and when it occurred.

You can download this and many other manuals, product videos, and installation software at www.lidl-service.com.

This QR code directs you to the Lidl Service page (www.lidl-service.com) where you can open your user manual by entering the article number (IAN) 482036_2410.

Service Center:

• DE Service Deutschland Tel.: 0800 5435 111 E-Mail: hoyer@lidl.de
• AT Service Österreich Tel.: 0800 447 744 E-Mail: hoyer@lidl.at
• CH Service Schweiz Tel.: 0800 56 44 33 E-Mail: hoyer@lidl.ch

IAN: 482036_2410

Supplier:

Please note that the following address is not a service address. Please contact the Service Center mentioned above first.

HOYER Handel GmbH Kühnehöfe 12 22761 Hamburg GERMANY