Kinan | High-quality KVM Switch, KVM Console, KVM over IP
User Manual for kinankvm models including: KFH188S, KFH188S 4K HDMI IP KVM Matrix Extender, KFH188S, 4K HDMI IP KVM Matrix Extender, IP KVM Matrix Extender, Matrix Extender, Extender
4K HDMI IP KVM Matrix Extender over Cat5/Fiber - Kinan | Professional & High-quality KVM Switch, KVM Console, KVM over IP
File Info : application/pdf, 23 Pages, 3.07MB
DocumentDocumentIP KVM Matrix Extender User Manual www.kinankvm.com @all right reserved Shenzhen Kinan Technology Co., Ltd Print date: 2024 /11 Version: V1.0 IP KVM Matrix Extender User Information Telephone Support For telephone support, please call below number: TEL 0086-755-26755041 MOBILE 0086-13714411566 User Manual User Notification All information, documentation, and specifications contained in this manual are subject to change without prior notice. The manufacturer does not make any explicit or implied statement or guarantee about the contents of this document, especially for merchantability or fitness for any specific purpose. Any manufacturer's equipment described in this manual is sold or licensed as it is. If the equipment is damaged artificially after purchase, the buyer (not the manufacturer, its distributor or reseller) shall bear all costs for necessary repair and any losses caused by equipment defects. If the correct operating voltage setting is not selected before operation, the manufacturer will not be responsible for any damage caused by system operation. Please make sure the voltage has been set correctly before use. 1 IP KVM Matrix Extender User Manual User Information................................................................................................ 1 Telephone Support ..................................................................................1 1. Introduction .................................................................................................3 1.1 Function ........................................................................................................ 4 1.2 Feature.......................................................................................................... 4 1.3 Safety Instructions ........................................................................................ 4 1.4 Product Overview ......................................................................................... 6 KFH188S receiver (TX)..............................................................................6 KFH188S sender (RX) ...............................................................................7 2. Installation ...................................................................................................8 2.1 Installation of Extender................................................................................. 8 3. Extender Configuration ............................................................................... 10 3.1 Use of UI Interface ...................................................................................... 10 [Name Setting of TX_List]....................................................................... 11 [Auto Scan Setting]................................................................................12 [User Login Interface] ............................................................................13 [The list of matched TX/RX] ....................................................................13 3.2 Function Setting .......................................................................................... 14 [Equipment Info] ...................................................................................15 [Equipment Setting]...............................................................................16 [Frame Push] ........................................................................................18 [Frame Get] ..........................................................................................18 [Update] ...............................................................................................20 [Hotkeys] ..............................................................................................21 4. Specifications ............................................................................................. 22 Specifications of KFH188S ......................................................................22 2 IP KVM Matrix Extender 1. Introduction User Manual The KFH188S IP KVM matrix extenders are highly optimized KVM extenders. The point-to-point connection supports transmission distance of 120m, and resolution up to 3840x2160@30Hz. This series of extenders can be connected to an 1G network switch to form a matrix switching system, which supports point-to-point (P2P) mode and matrix (Matrix) mode. The matrix switching system composed of extenders supports up to 9999 nodes by using a centralized management software, and it can support up to 40 nodes without using a centralized management software. It can connect multiple signal sources (such as servers, workstations, cameras and video walls). With the matrix switching system, computers and servers can be located in the central server room far from the workstation to improve security, reduce the temperature and noise of the working environment, and achieve a quiet and friendly human-computer interaction environment. The video compression algorithm of KFH188S matrix extender is a perfect combination of high-quality image and low latency (<8ms). The USB and video signals are transmitted through CAT5e/6/7 network cable. It supports USB devices such as touch screen, USB sound card, printer, etc., it can also support USB storage devices. 3 IP KVM Matrix Extender 1.1 Function User Manual This product is intended to be used as a device to increase the distance that a keyboard, monitor and mouse can be placed from a computer. This product is intended for professional use. The product should not be used in potentially explosive environments. The product may only be used according to the instructions as described in this manual. All use, other than that described in this manual, is seen as unintended use. In this product, the product connected to the host end is called the transmitter (TX), and the product connected to the display end is called the receiver (RX). 1.2 Feature HDMI / USB2.0/Audio/Rs232 - IP KVM Matrix Extender Supports dual-link backup connections (dual optical/dual network /1 optical and 1 network) Supports local (TX) HDMI port loop-out Single screen version Point-to-point connection supports maximum extension distance 120m/394ft Support seamless switching Freeze the last image after the disconnection of transmitter and receiver Support resolution up to 3840x2160@30Hz (4:4:4) USB transmission rate up to 480Mbit/s HDMI lossless real-time full HD transmission Support transmission through fiber optic and network (CAT5e/6/7) Support one Administrator account and one User account 1.3 Safety Instructions WARNING! Read and understand all safety instructions. Please follow all instructions. This will avoid accidents, fire, explosions, electric shocks or other hazards that may result in damage to property and/or severe or fatal injuries. Please ensure that everyone who uses the product has read and followed these warnings Keep all safety information and instructions for future reference and pass them on to subsequent users of the product. The manufacturer is not liable for cases of material damage or personal injury caused by incorrect handling or non-compliance with the safety instructions. In 4 IP KVM Matrix Extender User Manual such cases, the warranty will be voided. The product is not allowed to use in potentially explosive environments. Check the product and the cables for any damage before use. If there is any visible damage, a strong odour, or excessive overheating of components unplug all the connections immediately and stop using the product. If the product is not installed and used in accordance with this manual, it may cause disruptive interference with radio or television reception or affect other electronic products in residential areas. Use shielded cables to connect components to avoid the above interference. Only the power adapter included with the product should be used as the power supply. Do not use other adapters. Make sure your local voltage matches the rating indicated on the product before powering on it. The product must be connected to a permanent and earthed AC wall socket. Protect cables from being strained, pinched or buckled and place them in a way to prevent people from tripping over the cord. Avoid any damage to power adapter. Use the product with a suitable, properly installed and easily accessible power socket to make sure the product can be disconnected from the power socket at all times. Disconnect the product when not in use. Never touch the adapter with wet hands. Use the product within the specified performance limits. Keep the product away from any flammable materials like curtains. Protect the power adapter from use by third parties (particularly children). Keep the product away from heater. Do not drop or hit the product. 5 IP KVM Matrix Extender 1.4 Product Overview KFH188S receiver (TX) User Manual No. Components PWR1, PWR2 1 LED LINK1, LINK2 FIBER1, FIBER2 SLED 2 3 FIBER2, FIBER1 4 LAN2, LAN1 5 HDMI OUT 6 HDMI IN 7 RJ11 8 USB IN 9 DBG 10 AIN 11 AOUT 12 DC2, DC1 Description Power indicator Connection indicator Connection indicator of FIBER System indicator Ground the device Fiber interface LAN interface HDMI video output HDMI video input Serial Port USB-B, connect to PC or server Debug interface Audio input MIC output Connect to the 12V power supply 6 IP KVM Matrix Extender KFH188S sender (RX) User Manual No. Components Description PWR1, PWR2 Power indicator 1 LED LINK1, LINK2 FIBER1, FIBER2 Connection indicator Connection indicator of FIBER SLED System indicator 2 SW button 3 Connect to a USB keyboard 4 Connect to a USB mouse 5 USB2.0 Connect to USB2.0 peripherals 6 Ground the device 7 FIBER2, FIBER1 Fiber interface 8 LAN2, LAN1 LAN interface 9 HDMI OUT HDMI video output 10 RJ11 Serial Port 11 DBG Debug interface 12 MIC input 13 Audio output 14 DC2DC1 Connect to the 12V power supply 7 IP KVM Matrix Extender User Manual 2. Installation 2.1 Installation of Extender Warning! Please read and be aware of all safety instructions before installing the equipment. The extender can be set as a point-and-point mode to access a single PC, and also can access multiple PCs through matrix switching system. Matrix switching system Configuration requirements: The electrical port of the network switch must reach a gigabit rate and support IGMP multicast. 8 IP KVM Matrix Extender Connection Diagram of KFH188S User Manual 1. Make sure the KVM extender is grounded (See in the above diagram) 2. Connect the KFH188S_TX to the HDMI video port, USB port and audio port of a computer. (See in the above diagram) 3. Connect the KFH188S_RX to keyboard, mouse, monitor and audio device. (See in the above diagram) 4. Connect the transmi er and receiver interfaces via op cal fiber or CAT5E cable. (See in the above diagram) 5. Power on the transmi er and receiver. (See in the above diagram) 6. Connect the USB peripheral to the receiver (KFH188S _RX) (See in the above diagram) 9 IP KVM Matrix Extender User Manual 3. Extender Configuration 3.1 Use of UI Interface Press the left [Ctrl] key on the keyboard 3 times continuously, then the main UI interface will display. Function Name admin(M) Mode SN TX_List Status QV Description M: Main Link S: Backup Link Matrix mode P2P mode Node mode Scan device list The list of matched transmitter and receiver Setting of function key Click Equipment setting-User Setting Passto logout user account Number of connected devices List of transmitters Busy: TX and RX are paired --Busy-- : The RX has been connected to a TX No video: There is no video input from the host Connect: Can be connected Select Scan device Find the devices in the list Auto Scan 10 IP KVM Matrix Extender User Manual [Name Setting of TX_List] Double-click the name of a TX, and then the following name setting window appears. Function Name TX-0234b3616d6b Reboot Restore factory Bit Rate Network mode Scan time Blink HDCP EDID Description Click to change the name of TX, and then click "ESC" button to confirm your modification. Reboot the device Restore Factory Defaults Auto, 10M ,50M, 100M, 150M, 200M Multicast mode Unicast mode 10s, 20s, 30s, 60s, 90s ,120s, 150s, 180s, 210s, 255s To set PWR flashing time, check TX connection status. You can choose from "Close, 1 min, 10 min, 30 min, 60 min, always". Turn on/off internal test mode RX and TX must be set to the same AUTO, 1024x768, 1280x1024, 1366x768, 1600x900 , 1920x1080, 1920x1200, 2560x1440, 3840x2160, 1152x864, 2048x2048,1600x1200,1920x1920, 2160x2160, 2560 x1600, 3840 x1080, 4096 x1080, 2560 x2880 11 IP KVM Matrix Extender [Auto Scan Setting] Select TX devices, click the QV item, and then click " selected device (default scan time: 10s). User Manual " to automatically scan the Scan time: 10s, 20s, 30s, 60s, 90s, 120s, 150s, 180s, 210s, 255s 12 IP KVM Matrix Extender User Manual [User Login Interface] The default setting mode is " "(See User Setting on Page 18), the login interface will only appear after clicking the icon . User Name: Password: admin admin [The list of matched TX/RX] Click function key [ ], and then the following menu appears: When you see the device name in the TX list and the RX list, that means that the TX and RX are matched successfully. 13 IP KVM Matrix Extender 3.2 Function Setting Click the function key [ ], and then below menu appears: User Manual Function Name Equipment Info Description To switch on/off USB, Audio, KM, Get & Push Equipment Setting System and User Settings Frame Push Push the video and USB signals from current receiver to the chosen receiver in the list Frame Get Get the video and USB signals from any receiver in the list to the current receiver Upgrade Update device Hotkey Hotkeys of device 14 IP KVM Matrix Extender [Equipment Info] Select [ ] to switch on/off the system state. User Manual Function Name Usb2.0 Audio KM Share Description USB2.0 function Audio function Keyboard and Mouse Push video & Get video 15 IP KVM Matrix Extender [Equipment Setting] User Manual Function Name RX-8220785f097 All Blink HDCP Reboot Restore factory System mode Network mode Edid Sync Output timing Password mode Description Click to change the name of RX, and then click "ESC" button to confirm your modification. To set PWR flashing time You can choose from "Close, 1 min, 10 min, 30 min, 60 min, always". Turn on/off internal test mode RX and TX must be set to the same Reboot device Restore factory defaults Matrix mode P2P mode Node mode Multicast mode Unicast mode AUTO, 1024x768, 1280x1024, 1366x768, 1600x900 , 1920x1080, 1920x1200, 2560x1440, 3840x2160, 1152x864, 2048x2048,1600x1200,1920x1920, 2160x2160, 2560 x1600, 3840 x1080, 4096 x1080, 2560 x2880 1080P@60, 2160P@60, 640 x 480P@60, 800x600P@60 1024 x 768P@60,1280 x1024P@60, 1366x768, 1440x900 , 1920x1200, STRICT PASS, AUTO PASS Modify user name and set permissions 16 IP KVM Matrix Extender User Setting: User Manual Click " " , swipe right to " ", and then the following menu appears. You can modify user password and set permissions. You can't set the user name and password in Node mode, they can be set on the management control unit. Function Name Password Permissions Description Double click the name in the password list to modify the password of corresponding user. Set permissions for USB2.0, Audio, KM, Frame Get, and Frame Push. 17 IP KVM Matrix Extender [Frame Push] User Manual Click [Push] to push the video and USB signals from current receiver to the chosen receiver in the list. [Frame Get] Click [Get] to get the video and USB signals from any receiver in the list to the current 18 IP KVM Matrix Extender receiver. Connection Diagram of Collaborative Sharing Push & Get User Manual 19 IP KVM Matrix Extender [Update] User Manual ClickRXto update RX ClickTXto update TX 20 IP KVM Matrix Extender [Hotkeys] User Manual Function Name Left _Ctrl Left_ Shift Right_ Ctrl Right_Ctrl+Doulbe1-0 Description Shows or Hides the UI Disconnect host Next or previous channels Switch from channel 1 to 10 21 IP KVM Matrix Extender 4. Specifications Specifications of KFH188S User Manual Specifications KFH188S _TX KFH188S_RX HDMI input 1 N/A HDMI output 1 1 Power 12V x 2 12V x 2 LAN port RJ45 x 2 RJ45 x 2 Connections Optical Module SFP+ x 2 SFP+ x 2 Mic Speaker Square USB 3.5MM Stereo Jack (Green) 3.5MM Stereo Jack (Pink) 1 3.5MM Stereo Jack (Pink) 3.5MM Stereo Jack (Green) N/A USB 1 4 Resolution 3840x2160@60Hz Cable CAT5e/6/7 or Optical Fiber Cable I/R Value DC12V / 3A DC12V / 3A Power consumption 15W 15W Operating temperature 0--50 Storage temperature -20--60 Humidity 0--80% RH, non-condensing Material Metal Net weight(kg) 1.78 kg 1.8kg Product dimension (W × D × H) 317mm x 216.1 mm x 44mm Package dimension (W × D × H) 395mm x 274mm x110 mm 395mmx274mmx110 mm 22