Humax Universal Remote Control Codes
Language: Italiano
[Humax Logo]
1. Remote Control Setup
Follow these steps to set up your universal remote control:
- Select the desired mode (PVR, TV, DVD, AUDIO) by pressing the corresponding control button on the remote. The button will flash once.
- Press the same control button again and hold for approximately 3 seconds until it illuminates.
- Enter the 4-digit code. The control button will flash after each digit entry. After all 4 digits are entered, the control button will flash twice.
- If the entered code is valid, the corresponding appliance will turn off.
- If the appliance turns off, press the OK button on the remote to confirm the code. The control button will flash 3 times.
- If the appliance does not turn off, repeat the process from step 3 using a different code.
Note:
- If the code is not entered within 60 seconds, the universal remote will return to normal mode.
- Try different setup codes and select the one that offers the most functions.
2. Remote Control Button Descriptions
The following describes the functions associated with each button. Some buttons may not be applicable to certain devices.
| Button | TV | DVD | AUDIO | |
|---|---|---|---|---|
| STANDBY | POWER | POWER | POWER | |
| MUTE | MUTE | MUTE | ||
| PVR | ||||
| TV | ||||
| DVD | ||||
| AUDIO | ||||
| 1 | DIGIT 1 | 1 | INPUT 1 | |
| 2 | DIGIT 2 | 2 | INPUT 2 | |
| 3 | DIGIT 3 | 3 | INPUT 3 | |
| 4 | DIGIT 4 | 4 | INPUT 4 | |
| 5 | DIGIT 5 | 5 | INPUT 5 | |
| 6 | DIGIT 6 | 6 | INPUT 6 | |
| 7 | DIGIT 7 | 7 | INPUT 7 | |
| 8 | DIGIT 8 | 8 | INPUT 8 | |
| 9 | DIGIT 9 | 9 | INPUT 9 | |
| 0 | DIGIT 0, 11 | 0 | INPUT 0 | |
| TV Portal | MENU | MENU | MENU/MODE | |
| MENU | MENU | MENU | MENU | |
| ▶ | TEXT EXPAND | PLAY | PLAY | |
| ▌▌ | TEXT HOLD | PAUSE | PAUSE | |
| ■ | PIP INPUT | STOP | STOP | |
| ◄◄ | PIP MOVE | RECORD, OPEN CLOSE | RECORD | |
| ◄◄ | PIP OFF | REWIND, SEARCH REVERSE; SCAN | DVD SEARCH REW, CD SEARCH REW, REW | |
| ►► | PIP | FAST FORWARD, SEARCH FORWARD; SCAN | FAST FORWARD, DVD SEARCH REW, CD SEARCH REW, REW | |
| ◄ | TEXT MIX | SKIP -, TRACK -, CHAPTER - | DVD SKIP -, CD SKIP -, SKIP - | |
| ► | TEXT OFF, TV | SKIP, TRACK +, CHAPTER + | DVD SKIP+, CD SKIP +, SKIP + | |
| RED | RED | RED | RED | |
| GREEN | GREEN | GREEN | GREEN | |
| YELLOW | YELLOW | YELLOW | YELLOW | |
| BLUE | BLUE | PROGRAMME | BLUE | |
| MEDIA | GUIDE | GUIDE | GUIDE | DSP MODE |
| OK | OK | OK | OK | OK |
| UP | UP | UP | UP | UP |
| LEFT | LEFT | LEFT | LEFT | LEFT |
| RIGHT | RIGHT | RIGHT | RIGHT | RIGHT |
| DOWN | DOWN | DOWN | DOWN | DOWN |
| EXIT | EXIT | EXIT, RETURN | EXIT | EXIT |
| BACK | LAST, RECALL; PP; LAST CHANNEL | CLEAR | REPEAT | REPEAT |
| VOL+ | VOL+ | VOL+ | VOL+ | VOL+ |
| VOL- | VOL- | VOL- | VOL- | VOL- |
| i | INFO, OSD; DISPLAY | INFO, OSD; DISPLAY | INFO | INFO |
| LIST | LIST | LIST | LIST | LIST |
| P+ | P+ | P+ | P+ | P+ |
| P- | P- | P- | P- | P- |
| TEXT | TEXT | PVR MENU | PVR MENU | |
| SUB | SUBTITLE, LANGUAGE; CC | SUBTITLE | AUDIO, LANGUAGE | SURROUND |
3. Device Code Lists
This document contains comprehensive lists of remote control codes for various device types, including:
- TV Code List: Features codes for hundreds of TV brands.
- DVD Code List: Includes codes for hundreds of DVD player brands.
- VCR Code List: Provides codes for hundreds of VCR brands.
- Audio & AUX Code List: Lists codes for a wide range of audio equipment and auxiliary devices.
Each list is organized alphabetically by brand, with corresponding numerical codes provided for each entry. These lists are essential for programming your Humax universal remote to control your specific devices.
