VEVOR Hot Dog Machine User Manual

Introduction

This manual provides instructions for operating, maintaining, and cleaning your VEVOR Hot Dog Machine. Please read all instructions carefully before use.

VEVOR is committed to providing tools at competitive prices. The terms "Save Half" or "Half Price" are estimates of savings compared to major brands and do not apply to all product categories.

Important Safeguards

This manual outlines safety warnings and precautions. These cannot cover all possible conditions. Always use caution and common sense.

General Safety Instructions:

• Ensure your outlet voltage matches the appliance's rating label.
• Keep children and minors away from the machine.
• Do not touch hot surfaces directly; use handles or knobs.
• Prevent electrical shock: do not immerse cord or plug in water or other liquids.
• Do not immerse the appliance in water or any liquid.
• Unplug when not in use and before cleaning. Allow to cool before handling parts.
• Cool hot parts before operation.
• Do not operate with a damaged cord, plug, or if the unit malfunctions. Contact authorized service.
• Use only manufacturer-provided accessories.
• Store in a dry, safe place if not used for extended periods.
• Keep the power cord away from hot surfaces and ensure it doesn't hang over edges.
• Do not place the unit near hot air, electric burners, or heaters.
• Always switch off power before plugging/unplugging; pull the plug, not the cord.
• Use only for indicated purposes.
• Do not use outdoors or for commercial purposes.
• Keep out of children's reach.
• Do not clean with abrasive materials.
• Never leave unattended while in use.
• Ensure the machine is plugged into a properly grounded outlet. Consult a certified electrician if needed.
• Check power outlet, plug, and cord condition regularly. Damaged components require professional repair. Keep cords away from water and heat sources.
• Avoid use in flammable, gaseous, dusty, or explosive environments.
• Exercise extreme caution when moving the appliance with hot liquids.
• Do not operate in appliance garages or under wall cabinets. Unplug when storing in such areas to prevent fire risk.
• Type X attachment: Damaged supply cords must be replaced by the manufacturer or service agent.
• Appliance can be used by children aged 8+ and persons with reduced capabilities if supervised and instructed on safe use. Children should not play with the machine unsupervised. Cleaning/maintenance by children requires supervision.

Thank you for your purchase. Read this manual carefully for correct operation and keep it for future reference.

Product Parameters

The following table details the specifications for each model:

Notes:

1. The voltage used must match the power supply voltage.
2. Install the machine near a power switch and fuse.
3. If the machine is not powered, unplug and check the fuse.

Circuit Diagrams

Detailed circuit diagrams are provided for each model:

SC-5XD Circuit Diagram

Input: AC110-120V 60Hz. Components include: SB (Power Switch), FR1/FR2 (Thermostat-1/2), FC1/FC2 (Heating Tube Group-1/2), HL1/HL2 (Heating Indicator-1/2), FU (Fuse 10A), and M (Electric Machiner).

SC-7XD Circuit Diagram

Input: AC110-120V 60Hz. Components include: SB (Power Switch), FR1/FR2 (Thermostat-1/2), FC1/FC2 (Heating Tube Group-1/2), HL1/HL2 (Heating Indicator-1/2), FU (Fuse 15A), and M (Electric Machiner).

SC-11XD Circuit Diagram

Input: AC110-120V 60Hz. Components include: SB (Power Switch), FR1/FR2 (Thermostat-1/2), FC1/FC2 (Heating Tube Group-1/2), HL1/HL2 (Heating Indicator-1/2), FU (Fuse 20A), and M (Electric Machiner).

Product Components

The core components are the same across all three models.

Main Components:

• 1. Power Switch
• 2. Temperature Knob (Front)
• 3. Heat Light (Front)
• 4. Temperature Knob (Back)
• 5. Heat Light (Back)
• 6. Pan
• 7. Fuse
• 8. Protective Earthing
• 9. Power Socket

Component List (Parts Breakdown):

Operating Instructions

Preparation:

• Before first use, remove promotional materials and packaging.
• Wipe cooking plates with a damp cloth if dusty.
• Wipe with absorbent kitchen towel to remove excess oil.
• A slight smoke or odor may occur during the first heating, which is normal.

Operation Steps:

1. Place the machine on a clean, dry, level surface near a power outlet.
2. Plug the power cord into the machine's power socket.
3. Plug the cord into the wall outlet.
4. Testing: Turn on the power switch (indicator light should illuminate). Turn on the motor switch (rollers should rotate). Turn the thermostat knob clockwise to align with the red triangle; the heating indicator light will turn on, and the rollers will heat. Once the set temperature is reached (approx. 302°F / 150°C), the heating indicator light will turn off.
5. Place pre-prepared sausages parallelly in the middle of the rollers. The rollers rotate in opposite directions. Ensure sausages are not too close, leaving about 0.4 inches (10 mm) at each end.

Important Notes:

• For first-time use, preheat with the heating switch before turning on the rotary switch to prevent motor oil solidification.
• Do not open the bottom pan or sides unless specified.
• Recommended baking temperature: 248°F-320°F (120°C-160°C).
• Avoid touching hot steel rollers to prevent scalding.
• Disconnect from the external power supply when plugging or unplugging.
• Keep hands dry when plugging in the cord.

Tips & Hints:

• To save electricity and reduce heating time, defrost or microwave sausages beforehand.
• The pan collects oil drips and can be used to preheat sausages, but not for placing grilled sausages.

Cleaning and Maintenance

1. After use, unplug the machine and let it cool completely before cleaning.
2. Clean the rollers every 4-5 hours of grilling.
3. Wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or harsh pads.
4. Any other servicing should be performed by an Authorized Service Representative.

Storage

1. Always unplug the machine before storage.
2. Ensure the machine is cool and dry before storing.

Manufacturer Information:

Made in China

Manufacturer: Guangdong Shuangchi Dining Equipment CO., LTD.

Address: No.30 Jiahua Road, Jiafu Industrial Park, Yinzhan, Qingcheng District, Qingyuan, Guangdong, China.