Circuit Breaker Technical Data
A photograph shows a grey, robust electrical enclosure with a clear window, revealing a circuit breaker mechanism with an operating lever.
| Parameter | Value |
|---|---|
| Rated voltage | 230V, 230/400V, 400V, 60VDC |
| Rated current | C:63A |
| Rated frequency | 50/60Hz |
| Shock resistance | 30g.min. 2 shocks, t = 13ms |
| Rated short-circuit capacity | 10 kA |
| Energy limiting class | 3; B,C |
| Tripping characteristic | C |
| Back-up fuse | 100A gG |
| Index of protection | IP 20 (IP 40) |
| Terminals | 1-25mm², max 2.5Nm |
| Mechanical endurance | 20000 op.c. |
| Electrical endurance | 20000 op.c. (In≤32A), 10000 op.c. (In>32A) |
| Ambient temperature | max. -25°C ... +55°C |
| Storage temperature | max. -40°C ... +70°C |
| Build-in width | 18 mm/pol |
| Insulating class | B |
| Overvoltage category | III |
| Mounting on the rail | EN 60715 |
| Sealing possibility | YES |
| Terminal cover & Lock device | Available |
| Standards | EN 60898, IEC 60898, EN 60947-2 |
Technical Data Enclosure
A technical drawing illustrates the dimensions of the electrical enclosure. Key dimensions indicated include a height of approximately 177mm, width of 130mm, and depth of 105mm, with various mounting and connection points detailed.
- Degree of Protection: ?️ IP65
- Resistance to Impact: ? IK08
- Auto-extinguishing degree: ? HB (UL94)
- Test of resistance to glow wire: ?️ 650° C
- Ball Pressure Test: ? 70° C
The enclosure does not have N+E terminals.
Declaration of Conformity
Supplier/Manufacturer: GARO AB
Address: Box 203, S-335 25 GNOSJO, Sweden
Issue Date: 2011-06-08
Prepared by: Magnus Arvidsson, Quality Manager
Declaration Statement
GARO AB hereby declares that its product fulfils the requirements of the following EC directives:
- ✔️ The Low Voltage Directive (LVD) 2014/35/EU
- ✔️ Electromagnetic compatibility (EMC) 2004/108/EU
- ✔️ RoHS Directive (RoHS) 2011/65/EU
No electromagnetic compatibility (EMC) immunity or emission tests are required on the assembly, as the product does not contain electronic components affected by these requirements according to directive (EMC) 2004/108/EG.
Harmonised Standards
The following harmonised standards (latest edition) or technical specifications which comply with good engineering practice in safety matters in force within the EU have been used in the design:
- SS EN 61439-3
Conformity Confirmation
The equipment conforms completely with the above stated harmonised standards or technical specifications.
Product Surveillance: Product surveillance is maintained according to CENELEC's harmonised requirements, documents CCA-201.
Signed:
[Signature placeholder]
Magnus Arvidsson
Environmental- and Quality Manager
Date: 2013-06-18
