Home page
Instruction Manual for SUNJOY models including: A102009100 10x12 Metal Hardtop Gazebo with Netting, A102009100, 10x12 Metal Hardtop Gazebo with Netting, Hardtop Gazebo with Netting, Gazebo with Netting
10x12 Gazebo | Metal Hardtop Gazebo with Netting - SUNJOY
File Info : application/pdf, 25 Pages, 1.15MB
DocumentDocumentITEM NO.A102009100 WE HAVE YOU IN MIND, LET US SERVE YOU! Questions? Issues? CONTACT US 24 hours / 7 days a week www.sunjoyonline.com customer.care@sunjoygroup.com Country of Origin: China 1-(866)-578-6569 Production Number: xxxxxxxxxx Table of Contents Table of Contents..........................................................2 Safety Information.........................................................2 Warranty ......................................................................... 2 What is Covered .......................................................................2 What is Not Covered ................................................................2 Safety Information 1. More than six people are required for this assembly. 2. Some parts may contain sharp edges. Wear protective gloves. 3. When assembling and using this product, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment. Please read all instructions before assembly and usage. NOTICE: For outdoor use only. WARNING: Keep all flame and heat sources away from this gazebo fabric. This Gazebo is made with fabric that meets CPAI-84 specifications for flame resistance. It is not fire proof. The fabric will burn if left in continuous contact with any flame source. The application of any foreign substance to the gazebo fabric may render the flame-resistant properties ineffective. 2 / 25 Pre-Assembly ................................................................ 3 Planning Assembly...................................................................3 Hardware Included...................................................................3 Package Contents ....................................................................4 Assembly ....................................................................... 7 Care and Cleaning ........................................................ 8 CAUTION: Do not climb on top of the gazebo. Falling off the gazebo can result in serious injury, possibly even death. DANGER: This unit is heavy! Do not assemble this item alone. WARNING: While this gazebo is manufactured to withstand winds through only the supplied ground stakes, in areas subject to frequent severe weather, securing the gazebo to a deck, concrete patio or footings should be considered. Snow must be cleared off regularly during snowy days. Remove the snow at the top when it is thicker than 4 inches. In order to avoid damage, use a plastic snow rake to remove excessive snow and ice buildup from roof and keep away from falling debris. Warranty 1 YEAR WARRANTY WHAT IS COVERED This limited warranty is extended to the original purchaser and applies to defects in materials and workmanship of your item provided the item is maintained with care and used only for personal, residential purposes. The item is warranted to be free from defects in material or workmanship for a period of 1 years. WHAT IS NOT COVERED We do not reimburse for transportation of delivery costs, or compensate the individual or any outside party for assembling or disassembling the product. Country of Origin: China 3 / 25 Pre-Assembly PLANNING ASSEMBLY Before beginning assembly of this product, make sure all parts are present. Compare parts with the Hardware Included and Package Contents lists. If any part is missing or damaged, do not attempt to assemble the product. Contact customer service for replacement parts. HARDWARE INCLUDED NOTE: Hardware not shown to actual size. AA BB CC DD EE GG Part Part Number AA H010020012 BB H050030001 CC H010020011 DD H010020025 EE H040010004 GG P005100264 HH H070010003 II H010020021 JJ H010020024 KK H010020022 LL H050020017 WW H090010009 JJ Description M6 * 20 Bolt M6 Flat washer M6 * 15 Bolt M6 * 60 Bolt M6 Nut Plastic ring Dia. 8 * 180 Stake M6 * 70 Bolt M6 * 75 Bolt M6 * 40 Bolt Spring washer Wrench HH KK LL Quantity 68 294 112 12 28 52 8 2 16 56 72 2 Additional hardware 4 15 6 1 2 3 0 1 1 3 4 0 II WW Country of Origin: China Pre-Assembly (continued) PACKAGE CONTENTS A1 B1 C D3 out D4 out E3 E4 out out F1 out G1 G2 H1 Country of Origin: China 4 / 25 I2 J4 J5 J6 K L M N P1 P2 Pre-Assembly (continued) Q1 Q2 Q3 R1 R2 R3 R4 S1 S2 S3 T5 Country of Origin: China 5 / 25 T6 T7 T8 U V W1 W2 W3 W4 6 / 25 Pre-Assembly (continued) Part Part Number A1 P000200449 B1 P000100316 C P006100163 D3 P000400862 D4 P000400863 E3 P000400860 E4 P000400861 F1 P000501132 G1 P000501133 G2 P000501134 H1 P000601299 I2 P000601301 Description Post Stake base Stake cover Long cross beam (Left) Long cross beam (Right) Short cross beam ( Right ) Short cross beam ( Left ) Slanting beam connector Middle beam connector 1 Middle beam connector 2 Slanting beam Middle beam 2 J4 P000501130 Big top long connector tube J5 P000501129 Big top short connector tube J6 P000501131 Big top connector K P000601298 Small roof support beam Quantity 4 4 4 2 2 2 2 4 4 4 4 4 2 2 4 4 Part R4 S1 S2 S3 T5 T6 T7 T8 U V W1 W2 W3 W4 Part Number P000700591 P000800231 P000800233 P000800234 P005700639 P005700640 P005700641 P005700642 P005000395 P001200204 P000601302 P000601304 Description Big roof long side bottom panel (Right) Small roof support beam cover Slanting beam cover Middle beam cover Long pipe 1 Long pipe 2 Short pipe 1 Short pipe 2 Curve support Mosquito netting Big roof long side beam Big roof short side beam Quantity 2 4 4 4 2 2 2 2 8 1 4 4 P000601303 Big roof long side lower beam 4 P000601305 Big roof short side lower beam 4 L P000501128 Small roof connector 1 M P000800231 Small roof cover 1 N P005800001 Hook 1 P1 P000700587 Small roof long panel 2 P2 P000700586 Small roof short panel 2 Q1 P000700592 Big roof short side upper panel 2 Q2 P000700593 Big roof short side bottom panel (Left) 2 Q3 P000700594 Big roof short side bottom 2 panel (Right) R1 P000700588 Big roof long side upper panel 2 (Left) R2 P000700589 Big roof long side upper panel (Right) 2 R3 P000700590 Big roof long side bottom panel 2 (Left) Country of Origin: China 7 / 25 Assembly 1 Attaching the Stake Bases and Slanting Beam Connectors Slide the Stake covers (C) over the Posts (A1). Attach the Stake bases (B1) to the Posts (A1) using Bolts (CC) and Flat washers (BB). Attach the Slanting beam connectors (F1) to the top of the Posts (A1) using Bolts (AA) and Flat washers (BB). NOTE: To avoid destroying the finish, do not put the parts on the ground directly. 12X 4X 20X 8X 4X 4X 4X Country of Origin: China 8 / 25 Assembly 2 Connecting the Cross Beams Attach the Middle beam connectors 1 (G1&G2) on the Cross beams (D3&D4, E3&E4) using Bolts (JJ), Flat washers (BB), Spring washers (LL), and Nuts (EE). Tighten the bolts. NOTE: To avoid destroying the finish, do not put the parts on the ground directly. 16X 16X 32X 16X 2X 2X 2X 2X 4X 4X Country of Origin: China 9 / 25 Assembly 3 Attaching the Cross Beams Attach the assembled Cross beams (D3&D4, E3&E4) to the Posts (A1) using Bolts (AA), Flat washers (BB) and Spring washers (LL). Tighten the bolts. NOTE: To avoid destroying the finish, do not put the parts on the ground directly. 24X 24X 24X Country of Origin: China Assembly 10 / 25 4 Attaching the Curve Supports Attach the Curve supports (U) to the Posts (A1) and Cross beams (D3&D4, E3&E4) using Bolts (KK), Flat washers (BB) and Spring washers (LL). Tighten the bolts. NOTE: To avoid destroying the finish, do not put the parts on the ground directly. 32X 32X 32X 8X Country of Origin: China Assembly 11 / 25 5 Connecting the Big Roof Assemble the Big top connector tubes (J4&J5) with the Big top connectors (J6) using Bolts (CC) and Flat washers (BB). Tighten the bolts. NOTE: To avoid destroying the finish, do not put the parts on the ground directly. 16X 16X 2X 2X 4X Country of Origin: China Assembly 12 / 25 6 Attaching the Slanting Beams Connect the top of the Slanting beams (H1) with the Big top connectors (J6) using Bolts (AA) and Flat washers (BB). Connect the bottom of the Slanting beams (H1) with the Slanting beam connectors (F1) using Bolts (AA) and Flat washers (BB). Tighten the bolts. NOTE: To avoid destroying the finish, do not put the parts on the ground directly. 24X 24X 4X Country of Origin: China Assembly 13 / 25 7 Attaching the Middle Beams Connect the top of the Middle beam 2 (I2) with the Big top long connector tubes (J4) using Bolts (AA) and Flat washers (BB). Connect the bottom of the Middle beam 2 (I2) with the Middle beam connector 1 (G1) using Bolts (DD), Flat washers (BB) and Nuts (EE). NOTE: To avoid destroying the finish, do not put the parts on the ground directly. 8X 8X 24X 8X 4X Country of Origin: China Assembly 14 / 25 8 Attaching the Hook and the Small Roof Support Beams Insert and screw the Hook (N) tightly into the corresponding hole on the Small roof connector (L). Attach the Small roof support beams (K) to the Small roof connector (L) using Bolts (DD), Flat washers (BB) and Nuts (EE). NOTE: To avoid destroying the finish, do not put the parts on the ground directly. 4X 4X 1X 4X 8X 1X Country of Origin: China Assembly 15 / 25 9 Attaching the Small Roof Attach the Small roof support beams (K) to the Big Top Connector (J6) using Bolts (CC) and Flat washers (BB). NOTE: To avoid destroying the finish, do not put the parts on the ground directly. 4X 4X Country of Origin: China Assembly 16 / 25 10 Attaching the Small Roof Panels Attach the Small roof long panels (P1) and Small roof short panels (P2) to the Small roof frame using Bolts (CC) and Flat washers (BB). NOTE: To avoid destroying the finish, do not put the parts on the ground directly. 2X 2X 8X 8X Country of Origin: China Assembly 17 / 25 11 Attaching the Small Roof Support Beam Covers Attach the Small roof support beam covers (S1) to the Small roof frame using Bolts (KK) and Flat washers (BB). Then place the Small roof covers (M) in the Small roof connector and secure using Bolts (II) and Flat washers (BB). NOTE: To avoid destroying the finish, do not put the parts on the ground directly. 1X 4X 2X 8X 10X Country of Origin: China Assembly 18 / 25 12 Attaching the Big Roof Beams and the Big Roof Lower Beams Attach the Big roof short side beams (W2) to the top of the Middle beams 2 (I2) and Slanting beams (H1) using Bolts (CC) and Flat washers (BB). Tighten the bolts. Attach the Big roof long side beams (W1) to the top of Middle beams 2 (I2) and Slanting beams (H1) using Bolts (CC) and Flat washers (BB). Tighten the bolts. Attach the Big roof short side lower beams (W4) to the bottom of the Middle beams 2 (I2) and Slanting beams (H1) using Bolts (CC) and Flat washers (BB). Attach the Big roof long side lower beams (W3) to the bottom of the Middle beams 2 (I2) and Slanting beams (H1) using Bolts (CC) and Flat washers (BB). NOTE: To avoid destroying the finish, do not put the parts on the ground directly. 4X 4X 32X 32X 4X 4X Country of Origin: China Assembly 19 / 25 13 Attaching the Pipes Attach the Pipes (T5&T6&T7&T8) to the Middle beams 2 (I2) and Slanting beams (H1) using Bolts (CC) and Flat washers (BB). NOTE: To avoid destroying the finish, do not put the parts on the ground directly. 16X 16X 2X 2X 2X 2X Country of Origin: China Assembly 20 / 25 14 Attaching the Big Roof Upper Panels Attach the Big roof panels (Q1, R1, R2) to the Slanting beams (H) and Middle beams (I) using Bolts (CC) and Flat washers (BB). NOTE: To avoid destroying the finish, do not put the parts on the ground directly. 12X 12X 2X 2X 2X Country of Origin: China Assembly 21 / 25 15 Attaching the Big Roof Bottom Panels Attach the Big roof panels (Q2, Q3, R3, R4) to the Slanting beams (H) and Middle beams (I) using Bolts (CC) and Flat washers (BB). NOTE: To avoid destroying the finish, do not put the parts on the ground directly. 16X 16X 2X 2X 2X 2X Country of Origin: China Assembly 22 / 25 16 Attaching the Slanting Beam Covers Attach the Slanting beam covers (S2) to the Slanting beams (H) using Bolts (KK) and Flat washers (BB). Repeat for the Middle beam covers (S3). NOTE: To avoid destroying the finish, do not put the parts on the ground directly. 16X 4X 16X 4X Country of Origin: China Assembly 17 Hanging the Mosquito Netting Hang the Mosquito netting (V) to the Pipes (T5, T6, T7, T8) using the Plastic rings (GG). NOTE: To avoid destroying the finish, do not put the parts on the ground directly. 1X 52X 23 / 25 7x 6x Country of Origin: China Montage 18 Finition du Montage Attach the assembled pergola to lawn with Stake (HH). NOTE: To avoid destroying the finish, do not put the parts on the ground directly. 8X 24 / 25 Country of Origin: China 25 / 25 Care and Maintenance Our steel components for garden accessories and furniture are treated with rust inhibiting paint that protects it from rusting. However, due to the nature of steel, surface oxidation (rusting) will occur once these protective coatings are scratched. This is not a defect and thus not covered by the warranty. To minimize this condition, we recommend care when assembling & handling the product to prevent scratching the paint. Should any scratching or damage occur, we recommend immediate touch-up with rust inhibiting paint. Surface rust can also be easily removed with a very light application of common cooking oil. If surface oxidation (rusting) occurs and if no measure is taken to prevent this, the oxidation may start dripping on to deck or patio and caused damaging stains, which may be difficult to remove. This can be prevented if the above-mentioned measures are taken to keep the product from oxidizing. Use damp cloth to wipe off the stains as quickly as possible. If necessary, wash with a mild solution of soap and water; rinse thoroughly and dry completely. Periodically check and ensure that all bolts are well-tighten during use Limited Manufacturer's Warranty Sunjoy Group warrants to the original purchaser that this item is free from defects in workmanship and materials for a period of 1 year from the date of purchase, provided the item was factory-sealed at the time of purchase and is maintained with care and used only for personal, residential purposes. Should any manufacturing defect arise within this warranty period, Sunjoy Group will replace (at our option) any defective merchandise or parts upon proof of purchase; however, transportation and delivery costs, as well as payments to a third party for assembly or disassembly of the item, remain the responsibility of the purchaser. A purchaser of an "open box," previously-returned, or "clearance" item, as well as original purchasers outside of the warranty period, may obtain replacement parts from Sunjoy Group for products in current production, at nominal cost. Exclusions Items used for commercial, contract, or other non-residential purposes, or items damaged due to acts of nature, vandalism, misuse, or improper assembly are not covered. Corrosion or rusting of hardware is not covered. Proof of purchase (dated register receipt) is required for warranty claims. Warranty is to the original purchaser and is non-transferable. Any replacement of warranted items will be in the original style and color, or a similar style and color if the original is unavailable or has been discontinued. As some states do not allow exclusions or limitations on an implied warranty, the above exclusions and limitations may not apply. This warranty gives you specific rights, and you may also have other rights, which vary from state to state. Country of Origin: China