User Guide for NOVASTAR models including: MG Series, MG Series 2K Distributed Processors AV Over IP System, 2K Distributed Processors AV Over IP System, Processors AV Over IP System, AV Over IP System, IP System, System
It can be used for the transmission of the streaming media, control instructions and more. ○. Encoding style: HEVC and AVC. ○. Protocols supported: rtsp, rtcp ...
14 hours ago — It can be is used for receiving the streaming media, control instructions and more. It can be used for screen configuration with NovaLCT. LED OUTPUT. Ethernet port. 6x Gigabit Ethernet ports for LED ...
File Info : application/pdf, 17 Pages, 1.26MB
DocumentDocumentMG Series 2K Distributed Processors AV over IP System Specifications Introduction The MG series AV over IP system is a digitized distributed image processing and control system based on network. In the system, the encoders collect multiple audio and video signal sources scattered in different locations and transcode them into IP streams. The decoders receive the streams and display the corresponding information on the display devices to realize network sharing of audio and videos. Adopting the H.264 and H.265 transmission protocols, the MG series system utilizes low network bandwidth and provides low-latency and high quality audio and video experience. Breaking the limitations of the traditional centralized deployment, the system is suitable for the decentralized deployment of audio and video interconnection applications across regions and networks. The MG series system integrates long-distance digital audio and video transmission, signal switching, KVM operator and screen management. Working with the distributed visual management system and distributed KVM collaboration system, the MG series system can be applied in various visual application scenarios, such as control rooms, large conference communication centers, monitoring centers, data centers and dispatch centers. Certifications CCC, CE, FCC If the product does not have the relevant certifications required by the countries or regions where it is to be sold, please contact NovaStar to confirm or address the problem. Otherwise, the customer shall be responsible for the legal risks caused or NovaStar has the right to claim compensation. Key Features High Image Quality, Low Latency Adopting NovaStar's high-performance image processing technologies, the system has the characteristics of low bandwidth, low latency, high definition and high stability. The support for H.264 and H.265 video encoding helps achieve well balanced color sampling, processing and transmission of videos up to 10bit 4:2:2. The video transmission quality is extremely high, with the image transmission free of distortion and the original color saturation well maintained. The system latency is as low as 60 ms or less, realizing "what you see is what you get". www.novastar.tech 2 Output Mosaic from Multiple Decoders, Accurately Synchronized The MG series decoders use unique synchronization technology to achieve full synchronization of output images of all decoders, which fundamentally eliminates the phenomena of asynchronization of mosaic images from different decoders or tearing when playing high speed moving videos. KVM Control, Cross-Platform Roaming The KVM management and cross-screen mouse roaming are supported. All operations can be done from the mouse, and the mouse cursor can move across windows and monitors, realizing simultaneous preview of multiple signal sources. In addition, different platforms (Windows, Linux and Mac OS) can be controlled from only one set of keyboard and mouse at the node. Signal Pushing and Capturing, Easy Collaboration The MG series system supports signal pushing between operators or between the operators and LED screen, allowing the problems or images that need to be decided to be pushed to others or the LED screen. Through collaboration, the decision can be made timely and problems can be handled efficiently. www.novastar.tech 3 Web Control, Convenient Operation and Configuration The management system supports configuration management through the Web, providing users with a simple and fast operation method and enabling cross-terminal operations. The web control includes device management, accurate permission assignment, input and output resolution management of encoders and decoders, LED screen management, firmware update and log management. www.novastar.tech 4 Product Features Discrete deployment, unified management Multiple geographically scattered signal nodes can be quickly connected to the system for unified signal data control and management. Mass access, unlimited expansion Thanks to its IP-based architecture, system nodes can be quickly increased based on the network and each node can access the network as long as an IP address is specified. Hierarchical permissions, secure management The system supports role-based hierarchical user permission management. The administrator can configure different permissions for users, so that the operation permissions can be divided into the most detailed. In this way, different operators with different roles can perform different operations, which greatly improves work efficiency and security. Stable, secure and reliable The decentralized design allows a single node to be used as an independent control center. Each node works independently and the control failure of a single node will not affect the operation of the entire system. Only the faulty node needs to be repaired. This ensures the stability of the entire system operation and facilitates system maintenance. Convenient implementation and easy maintenance Encoders and decoders can be added directly to the system network to quickly expand the system, and the system automatically synchronizes system parameters without manual reconfiguration. Remote update and batch update are also supported. Man-device separation, tidy and efficient The distributed processors are placed in the computer room for management, leaving space for the command and control center and avoiding a messy workspace and noise pollution in the past. It not only realizes man-device separation and allows one person to operate multipledevices, but also improves the processor data security. Visualized management and precise arrangement The output images on the screens are fully visualized. Real-time preview of signal source images, screen layout and LED screen images are available to realize precise screen display arrangement, avoiding signal switching errors and thus improving the switching efficiency and realizing "what you see is what you get". Mouse roaming, one KVM operator with multiple screens, multiple signals on one screen Each KVM operator can control multiple screens and each screen supports preview and control of up to 4 signal images. The operations on multiple monitors can be done from only one set of keyboard and mouse, greatly simplifying the desktop environment. While the operator is operating the local monitor data, the data and operation can also be displayed in real time on the LED screen or other display terminals. Multiple audio and video access - Supports access of signals in multiple formats, including HDMI, IP, Audio and more. - Supports access of various kinds of videos and is compatible with multiple resolutions. - Supports access of IP cameras using the ONVIF protocol and streaming media data using the RTSP protocol. Secure KVM operator management The KVM operator can set permissions for different KVM groups, allowing KVMs in different groups to display specified data information and operators to operate the specified data information. This ensures system data security and meets the management requirements of high-security-level mission-critical projects. Flexible loading of LED screens - A single MGT600 drives up to 3.9 million pixels, with the width up to 10240 pixels and height up to 8192 pixels. - Supports backup between devices and Ethernet ports. Free layout of multiple layers The screen loaded by a single device supports free layout of 4x 2K×1K@30Hz, 2x 4K×1K@30Hz and 1x 4K×2K@30Hz to achieve flexible and excellent visual effects. Scrolling OSD text - Supports display of the static or dynamic OSD text on the LED screen. - Supports customized text content, font, color, size and background color of the OSD text. - Supports configurations of the text scrolling direction, initial position and speed. Customized presets and preset playlist playbacks - Supports management of multiple screens and presets. - Supports two preset playback modes. The options include loop and scheduled playback. Input source management - Supports customized group management of input sources. - Supports EDID settings for input sources. - Supports setting a logo for each input source. - Supports input source cropping. - Supports configurations of input source audio. Flexible audio options - Supports accompanied and independent audio inputs. www.novastar.tech 5 - Supports output of audio that comes with the layer. The audio output can be the accompanied audio or independent audio. - Supports output volume adjustment. Switch and use local signals on the OSD menu of the KVM operator system. Device IP displayed on the front panel screen System call for quick device locating When the device is called, the indicators flash. Firmware update on Web page Device backup www.novastar.tech 6 Appearance MG200 Encoder Front Panel No. Area Function OLED screen Displays the device IP address Indicators PWR: Power indicator - On: The power supply is normal. - Off: The power supply is abnormal. RUN: Running status indicator - Flashing: The device is functioning normally. - On/Off: The device is functioning abnormally. LAN: Ethernet port connection status indicator - Flashing: The Ethernet port connection is normal. - Off: The Ethernet port connection is abnormal. OPT: Reserved indicator VIDEO: Video transmission and processing status indicator - On: The video stream processing is normal. - Off: The video stream processing is abnormal or there is no video stream. Note When the device is called, the RUN, LAN and VIDEO indicators simultaneously flash. Rear Panel Input Connectors Connector Qty Description HDMI 1.3 1 Input resolutions up to 1920×1080@60Hz Up to 10bit 4:4:4 video input and processing HDCP 1.4 and HDCP 1.3 compliant EDID management supported www.novastar.tech 7 - Width: 800 to 4088 pixels - Height: 600 to 4095 pixels Accompanied audio supported Audio Connectors AUDIO 2 1x AUDIO input, 1x AUDIO output 3.5 mm standard analog audio connectors Audio sampling rate: 22 kHz, 24 kHz, 44 kHz, 48 kHz (default) and 96 kHz AAC audio encoding format supported Dual channel with depth up to 24bit Loop through of input connector audio Output Connectors LAN 1 Gigabit Ethernet ports It can be used for the transmission of the streaming media, control instructions and more. Encoding style: HEVC and AVC Protocols supported: rtsp, rtcp, rtp, and ONVIF Status LEDs: The top left one indicates the connection status. - On: The port is well connected. - Flashing: The port is not well connected, such as loose connection. - Off: The port is not connected. The top right one indicates the communication status. - On: The Ethernet cable is short-circuited. - Flashing: The communication is good and data is being transmitted. - Off: No data transmission Note CAT5E and above standard wires are recommended. LOOP OUT 1 Control USB 1 Power 1 connector Loop through of the HDMI input Type-B USB 2.0: Connected to the input computer for keyboard, mouse and USB drive data transmission Type-A USB 3.0: Reserved DC 12V 3A Connects to the external power outlet. MG201 Decoder Front Panel www.novastar.tech 8 No. Area Function OLED screen Displays the device IP address Indicators PWR: Power indicator - On: The power supply is normal. - Off: The power supply is abnormal. RUN: Running status indicator - On/Off: The device is functioning abnormally. - Flashing: The device is functioning normally. LAN: Ethernet port connection status indicator - Flashing: The Ethernet port connection is normal. - Off: The Ethernet port connection is abnormal. OPT: Reserved indicator VIDEO: Video output indicator - On: The video output is normal. - Off: The video output is abnormal or there is no video output Note When the device is called, the RUN, LAN and VIDEO indicators simultaneously flash. Rear Panel Output Connectors Connector Qty Description HDMI 1.3 OUT 1 Output resolutions up to 1920×1080@60Hz Up to 10bit 4:4:4 video input and processing HDCP 1.4 and HDCP 1.3 compliant Accompanied audio output supported EDID management supported - Width: 800 to 4096 pixels - Height: 600 to 4096 pixels Audio Connectors AUDIO 2 1x AUDIO input, 1x AUDIO output 3.5 mm standard analog audio connectors Audio sampling rate: 22 kHz, 24 kHz, 44 kHz, 48 kHz (default) and 96 kHz AAC audio encoding format supported Dual channel with depth up to 24bit Loop through of input connector audio The audio output connector supports volume adjustment. Transmission Connectors LAN 1 Gigabit Ethernet port It can be used for receiving the streaming media, control instructions and more. www.novastar.tech 9 Control USB Encoding style: HEVC and AVC Protocols supported: rtsp, rtcp, rtp, and ONVIF Status LEDs: The top left green one indicates the connection status. - On: The port is well connected. - Flashing: The port is not well connected, such as loose connection. - Off: The port is not connected. The top right yellow one indicates the communication status. - On: The Ethernet cable is short-circuited. - Flashing: The communication is good and data is being transmitted. - Off: No data transmission Note CAT5E and above standard wires are recommended. 2 USB 2.0 connectors Connect to the mouse and keyboard. Power 1 connector DC 12V 3A Connects to the external power outlet. MGT600 All-in-One Decoder Front Panel No. Area Function OLED screen Displays the device IP address. Indicators PWR: Power indicator - On: The power supply is normal. - Off: The power supply is abnormal. RUN: Running status indicator - Flashing: The device is functioning normally. - On/Off: The device is functioning abnormally. LAN: Ethernet port connection status indicator - Flashing: The Ethernet port connection is normal. - Off: The Ethernet port connection is abnormal. OPT: Reserved indicator VIDEO: Video out indicator - On: The video output is normal. - Off: The video output is abnormal or there is no video output. Note When the device is called, the RUN, LAN and VIDEO indicators simultaneously flash. www.novastar.tech 10 Rear Panel Area AUDIO USB INPUT LED OUTPUT Connector Description IN OUT USB 3.5 mm analog audio input connector Audio sampling rate: 22 kHz, 24 kHz, 44 kHz, 48 kHz (default) and 96 kHz AAC audio encoding format supported Dual channel with depth up to 24bit 3.5 mm audio output connector Audio sampling rate: 22 kHz, 24 kHz, 44 kHz, 48 kHz (default) and 96 kHz AAC audio encoding format supported Dual channel with depth up to 24bit The audio output connector supports volume adjustment. 2x USB 2.0 ports Reserved LAN Gigabit Ethernet port It can be is used for receiving the streaming media, control instructions and more. It can be used for screen configuration with NovaLCT. Ethernet port 6x Gigabit Ethernet ports for LED screen loading It can drive up to 3.9 million pixels, with the width up to 10240 pixels and height up to 8192 pixels. Applications www.novastar.tech 11 Dimensions MG200 & MG201 The MG200 and MG201 devices have the same size. MGT600 Tolerance: ±0.3 Unit: mm Tolerance: ±0.3 Unit: mm Specifications Overall Specifications Model MG200 MG201 MGT600 Electrical Power Specifications connector DC12V 3A 100-240V~, 50/60Hz, 2A~0.8A Max power 17 W consumption 27W Operating Environment Temperature 10°C to +60°C Humidity 0% RH to 85% RH, non-condensing Storage Environment Temperature 20°C to +70°C Humidity 0% RH to 95% RH, non-condensing Physical Dimensions 211.7 mm × 258.2 mm × 43.6 mm 482.6 mm × 334.2 mm × 50.1 mm Specifications Packing Information Accessories 1x Certificate of Approval, 1x Safety Manual 10x Phillips screws, 1x hanging bracket, 1x connecting piece, 4x foot pads, 1x power adapter, 1x HDMI cable, 1x assembly instructions 1x Power cord www.novastar.tech 12 Overall Specifications 1x USB cable - Net weight 1.8 kg 1.8 kg Gross weight 2.8 kg 2.7 kg Packing box dimensions 695 mm × 458 mm × 385 mm Note Each box contains up to 6 devices. 4 kg 6.3 kg 565 mm × 450 mm × 175 mm Video Source Features Input Connector HDMI 1.3 Bit Depth 8bit RGB4:4:4 YCbCr4:4:4 YCbCr4:2:2 10bit RGB4:4:4 YCbCr4:4:4 YCbCr4:2:2 Max Input Resolution 2048×1080@60Hz 4096×1080@30Hz 2048×1080@30Hz 4096×1080@30Hz Input and Output Resolutions Input Resolutions Standard Resolutions Resolution Frame Rate (Hz) 3840×1080p 30 2048×1152p 30/60 2048×1080p 30/48/50/59.94/60 1920×1200p 50/59.94/60 1920×1080p 30/48/50/59.94/60 1792×1280p 60 Input Connector HDMI 2.0 Forced Forced www.novastar.tech 13 Standard Resolutions Resolution Frame Rate (Hz) 1680×1050p 60 Input Connector HDMI 2.0 1600×1200p 48/50/59.94/60 1600×900p 48/50/59.94/60 1440×900p 60/75/85 1400×1050p 48/50/59.94/60/75 1360×768p 60 1280×1024p 48/50/59.94/60/75/85 1280×960p 50/59.94/60/85 × 1280×800p 50/59.94/60 1280×768p 48/50/59.94/60/75 × 1280×720p 48/50/59.94/60 × 1152×864p 75 × 1024×768p 48/50/59.94/60/75/85 × 800×600p 59.94/60/75/85 × : The current connector supports the standard resolution and frame rate settings. ×: The current connector does not support the standard resolution and frame rate settings. Output Resolutions Standard Resolutions Resolution Frame Rate (Hz) HDMI 1.3 Default resolution: 1920×1080@60Hz 3840×1080p 30 2304×1152p 60 2048×1152p 30/60 www.novastar.tech 14 Standard Resolutions Resolution Frame Rate (Hz) 2048×1080p 30/48/50/59.94/60 HDMI 1.3 Default resolution: 1920×1080@60Hz 1920×1200p 50/59.94/60 1920×1080p 30/48/50/59.94/60 1792×1280p 60 1680×1050p 60 1600×1200p 48/50/59.94/60 1600×900p 48/50/59.94/60 1440×900p 60/75/85 1400×1050p 48/50/59.94/60/75 1364×768p 50/59.94/60 1364×1024p 48/50/59.94/85 1360×768p 60 1280×1024p 48/50/59.94/60/75/85 1280×960p 50/59.94/60/85 1280×800p 50/59.94/60 1280×768p 48/50/59.94/60/75 1280×720p 48/50/59.94/60 1152×864p 75 1024×768p 48/50/59.9 : The current connector supports the standard resolution and frame rate settings. ×: The current connector does not support the standard resolution and frame rate settings. www.novastar.tech 15 Notes and Cautions FCC Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Others This is Class A product. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures. www.novastar.tech 16Microsoft Word 2013 Microsoft Word 2013