Kogan Help Centre
User Guide for kogan models including: KASLSTRCFDA Foldable Racing Simulator Steering Wheel Stand, KASLSTRCFDA, Foldable Racing Simulator Steering Wheel Stand, Racing Simulator Steering Wheel Stand, Steering Wheel Stand, Wheel Stand
KOGAN KASLSTRCFDA (01) PDF MANUAL - Manual-Hub.com
File Info : application/pdf, 16 Pages, 797.11KB
DocumentDocumentFOLDABLE RACING SIMULATOR STEERING WHEEL STAND KASLSTRCFDA SAFETY & WARNINGS WARNING: Use with products heavier than the rated weights indicated may result in instability causing possible injury. · Closely follow the assembly instructions. Improper installation may result in damage or serious personal injury. · Safety gear and proper tools must be used during assembly. · Be careful of sharp objects during assembly. · Ensure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components. · Use the mounting screws provided and do not over tighten them. · This product contains small items that could be a choking hazard if swallowed. Keep small items away from children. · This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury. IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installation. If any parts are missing or faulty, contact help.Kogan.com for support. MAINTENANCE: Check that the product is secure and safe to use at regular intervals (at least every three months). COMPONENTS Lay all components out on a clean floor and ensure all parts are included. If any pieces are missing, check all packaging thoroughly, then contact help.Kogan.com for assistance. A B C (x4) D (x2) E (x2) F G H (x2) I (x4) J M4x6 (x4) K M6x35 (x2) L M6x12 (x2) M (x2) N (x2) O (x6) P Spanner Q 5mm Allen Key ASSEMBLY Step 1: Step 2: WARNING: Ensure the stand is fully unfolded prior to removing the safety pin. Step 3: Pedal mount tilt adjustment Step 4: Steering wheel mount tilt adjustment Step 5: Step 6: Step 7: Height adjustment Step 8: The mounting plate (F) can be reversed to swap between left and right side mounting. Step 10: The gear shift mount (G) can be installed in two different positions. Option 1 Option 2 Step 11: Step 12: Folding the stand flat WARNING: Lock the pedal mount in position using the safety pin prior to folding the stand. NOTES Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com