AIVITUVIN: Leading Brand in Wooden Pet House Industry! – Aivituvin
Instruction Manual for aivituvin models including: AIR 28 Rabbit Hutch Indoor Bunny Cage, AIR 28, Rabbit Hutch Indoor Bunny Cage, Hutch Indoor Bunny Cage, Indoor Bunny Cage, Bunny Cage, Cage
aivituvin AIR28 643459226722 0643459226722 1009120519
File Info : application/pdf, 16 Pages, 2.42MB
DocumentDocumentINSTRUCTION MANUAL AIR 28 www.aivituvin.com NOTICE Please retain these instructions for future Firmly secure all bolts,screws and knobs before use. Reconfirm that all bolts,screws,and knobs are secure every 90 days. Fasten screws loosely during initial assembly. Do not fully tighten screws until the item is completely assembled. Do not use or store this item in the proximity of open flame or flammable/combustible chemicals. Be aware that some parts are heavy and have sharp edges. Be aware that moving parts can injure,crush and cut. If any parts are missing,broken,damaged,or worn,stop using this product until repairs are made and/or factory replacement parts are installed. Do not use this item in a way inconsistent with the manufacturer's instructions as this could void the product warranty. 01 TOOLS REQUIRED PHILLIPS SCREWDRIVER DRILL (RECOMMENDED) 2PERSON ASSEMBLY APPROXIMATELY 60MIN. ASSEMBLY HARDWARE M3.5x60 mm SCREW 4PCS+1 spare M3.5x40 mm SCREW 16PCS+1 spare P1 P2 M3.0x16 mm SCREW 21PCS+1 spare P3 Latch 1PC P4 SPRING LATCH 2PCS P5 P5 Roof hinge 2PCS P6 P6 M3.0x16 mm SCREW 4PCS+1 spare 02 P7 HARDWARE Hutch Pen 03 PARTS Front panel 1PC Back panel 1PC Side panel 1PC A B C Middle panel 1PC Divider 1PC Floor 2PCS D E F Front and back panel 2PCS Side panel of pen 1PC Roof of hutch 1PC G H I 04 PARTS Roof of pen 1PC J 05 PRODUCT ASSEMBLY 01 Attach the front Part A and the back Part B to the side Part C by 4xP2. B C A P2 X4 02 Attach the middle panel Part D to the front and back by 4xP2. D P2 X4 06 PRODUCT ASSEMBLY 03 Put the floor Part F into the hutch. Fx2 04 Insert the divider Part E to the hutch. E 07 PRODUCT ASSEMBLY 05 Attach the roof Part I to the hutch by 9xP3. I 06 Attach the roof hinge P6 with 8xP3. P3 X9 P6 X2 P3 X8 08 PRODUCT ASSEMBLY 07 Attach the panel Part G to the front by 2xP1. G P1 X2 08 Repeat the Part G assembly in the opposite side by 2xP1. G P1 X2 09 PRODUCT ASSEMBLY 09 Attach the side pen panel Part H to the sides by 2xP2 each side. H P2 X2 P2 X2 10 Attach the roof Part J to the pen by 4xP2. J P2 X4 10 PRODUCT ASSEMBLY 11 Attach the spring latch P5 to the front door by 2xP3. 12 Attach the spring latch P5 to the back door by 2xP3. P3 X2 P5 X1 P3 X2 P5 X1 11 PRODUCT ASSEMBLY 13 Attach the lock P4 to the side by 4xP7. P7 X4 P4 X1 12 12 WARNING Manufacturer and seller expressly disclaim any and all liability for personal injury,property damage or loss,whether direct,indirect,or incidental,resulting from the incorrect attachment,improper use,inadequate miantenance,or neglect of this