What's In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
A visual representation of the PROAIM Vanguard Collapsible Utility Production Cart, showing its main frame, wheels, and extended handles.
Included Components:
- 2 x Wheels
- 2 x Break Wheels
- 2 x Knobs
- Alley key (Size:4mm)
- Spanner (Size:17 & 19mm)
A layout of the included components: two large pneumatic wheels, two smaller caster wheels with brakes, two threaded knobs for securing parts, a 4mm Allen key, and a dual-ended spanner (17mm and 19mm).
Vanguard Setup
Step 1: Attach Brake Wheels
Remove the bolt and washer from the brake wheels.
Close-up view showing a hand removing a bolt and washer from the mounting point of a brake wheel.
Insert the brake wheels into the vanguard and install the washer.
A hand inserting a brake wheel assembly into the designated mounting bracket on the cart's frame, followed by placing a washer onto the bolt.
Now attach the nut with the bolt and tighten it properly with the help of a spanner (17 mm).
A hand using a 17mm spanner to tighten a nut onto a bolt that secures the brake wheel assembly to the cart frame.
Note on Front Wheels: The two front wheels swivel 360° for easy rolling and steering on uneven surfaces and have brakes for reliable parking. These easy rolling wheels are air-free, and their highly textured design offers a better grip on gravel, grass, debris, and other difficult surfaces.
Step 2: Attach Main Wheels
Remove the bolt with the help of a spanner (19mm) and insert the wheels.
A hand using a 19mm spanner to loosen and remove a bolt from the mounting point of a large wheel.
Then insert the bolt into the wheel and tighten it properly with the help of a spanner (19mm). Repeat this process again for the other wheel.
A hand inserting a bolt through a large wheel assembly and into the cart frame, then using a 19mm spanner to tighten the bolt. The process is shown for one wheel, with a note to repeat for the second.
Cart Features and Operation
Note: The cart is designed for maximum efficiency on any ground with its impressive loading capacity, fully collapsible design, top-class craftsmanship, and resilient wheels.
Step 3: Secure Components with Knobs
Insert both the knobs into the bottom side of the cart and tighten it properly, as shown in the image.
A hand screwing a knob into a threaded receiver located on the lower frame of the cart. The image shows the knob being tightened to secure a part.
Step 4: Handle Operation
Push the handle of the cart downwards and then push the handle upwards.
A sequence of two images demonstrating the operation of the cart's collapsible handle. The first shows the handle being pushed down, and the second shows it being pulled up to its operational position.
Note on Collapsibility: The handles easily collapse via a foot release bar at the bottom of the cart, making it easy to fit into car trunks.
Repeat the same with the other side as well.
Note on Capacity: The cart has an impressive capacity to haul up to 250kg/550lb load in a single go.
Step 5: Adjust Leg Length
Loosen both the knobs.
A hand shown loosening a knob on the cart's frame, indicating a step for adjustment or disassembly.
Note on Safety: The cart is geared toward safety with eyelets for hooking and strapping any even or unevenly shaped equipment, ensuring complete protection.
Increase the length of the legs and properly tighten its knob.
A hand extending one of the cart's legs and then tightening a knob to secure the leg at the desired length.
Extended Features and Specifications
Note on Extendable Bed: It offers an extendable bed that extends the cart length from 30" to a very long 52", making it more spacious.
YOUR PROAIM VANGUARD COLLAPSIBLE UTILITY PRODUCTION CART ALL DRESSED UP AND READY TO GO!
A photograph of the PROAIM Vanguard Collapsible Utility Production Cart fully assembled and in use, depicted with several accessories such as cases and bags, illustrating its utility and capacity. This configuration is shown with optional accessories.
Warranty and Liability
Warranty Information
PROAIM offers a one-year warranty for its products from the date of purchase. Within this period, repairs will be provided without charge for labor or parts. Warranty does not cover transportation costs or damage resulting from misuse or accidental damage. Warranty repairs are subject to inspection and evaluation by PROAIM.
Liability Statement
PROAIM is not liable for damage caused by products not supplied by PROAIM, mishandling during transit, accidents, misuse, neglect, lack of care of the product, or service performed by any party other than PROAIM.
Customer Support
For any dissatisfaction, customers should contact PROAIM support immediately. PROAIM promises utmost support and care until the product is in use.
