After-Sales Support

Tripod Stand (Gift)

User's Manual

1. Open your phone's camera app.

2. Aim the camera at the QR code.

3. Tap the banner or small QR code in the bottom right corner.

4. Access our YouTube installation video.

Installation Video: https://youtu.be/nNrRaNAeAUU

List of Accessories

• 1x Tripod
• 1x Connection Piece
• 1x Electric Heater
• 1x M6*60 Screw
• 1x M6 Butterfly Nut

How to Install

Step 1

Let the tripod stand on the ground, adjust it to the suitable height, then lock it and make sure it will not loosen. Finally, insert the connection piece like the picture A.

Picture A shows a hand securing a connection piece to the tripod leg.

Step 2

Place the wall bracket on the screw on the back of the heater, and then adjust the wall bracket to the proper position with the nut from the accessory bag to lock it and make sure it will not loosen.

An image shows the wall bracket being attached to the back of the electric heater and secured with a nut.

Step 3

Match the bracket on the back of the heater and the connection piece of the tripod stand, adjust the heater to a suitable position, and lock it with the M6 Butterfly Nut and M6*60 Screw from the accessory to ensure that it will not loosen.

An image shows the heater bracket being connected to the tripod stand's connection piece and secured with the M6 butterfly nut and screw.

Step 4

We recommend attaching a sandbag or other weighted object to the base of the tripod for increased stability when using it.

An image shows a sandbag attached to the base of the tripod for added stability.