User Guide for Vidami models including: Pro Tools MODE Flat Surface and HOLD Loop, Pro Tools, MODE Flat Surface and HOLD Loop, Surface and HOLD Loop, HOLD Loop

Pro Tools Mode & Functions

Vidami Blue - Modes & Functions Guides

Vidami Blue | Modes & Functions Guides

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 2 Pages, 440.60KB

Document Document

PROTOOLS MODE & FUNCTIONS GUIDE (PC)
PROTOOLS MODE
To switch to PROTOOLS MODE, place Vidami Blue on a flat surface and HOLD Loop and Play/Pause as you TAP Back. The blue LED will blink 3 times to show that you successfully changed modes.
HOLD Loop and Play/Pause

TAP Back

PROTOOLS MODE FUNCTIONS

TAP Speed to nudge back by 1 bar or other HOLD Speed to go to memory location 1
TAP Loop to nudge forward by 1 bar or other HOLD Loop to go to memory location 2

TAP Forward to turn on/off metronome (click) HOLD Forward to create a new duplicate track

TAP Play/Pause to play or pause

HOLD Play/Pause to create vmemory location

TAP Back for record in/out

HOLD Back to undo

NOTE
To check which mode your Vidami Blue is in, open a blank document on your computer or iOS device and place cursor on document. On the Vidami Blue, HOLD Speed and Forward as you TAP Play/Pause. The blue LED will blink 3 times and the name of the current mode will print out on your document.

PRO TOOLS DAW SETTINGS
PRO TOOLS TRACK & PREFERENCE SETUP
In order to optimize the use of your Vidami Blue, the following settings need to be configured.
Track Setup Under the Track menu, select Duplicate to open the Duplicate Tracks dialog box. In the Duplicate Tracks box: de-select Active Playlist, Alternate Playlist, and Automation. Click "OK" to save. (Navigation: Track menu/Duplicate/Duplicate Tracks)
Preferences Setup Under the Pro Tools menu, select Preferences / Operation. Under the Record quadrant: use the drop-down menu next to Record Enable Buttons, and select Cancel Previous on All Tracks. Click "OK" to save. (Navigation: Pro Tools menu/Preferences/Operation/Record/Record Enable Buttons)
Edit Window Setup In the upper left corner of the Main Edit Window, beneath the Tool Bar, there are a series of buttons depending on your version of Pro Tools, there may be up to seven.
Configure these buttons as follows: · Tab to Transients > Active · Link Timeline and Edit Selection > Active · Link track and Edit Selection > Active · Insert Follows Playback > Inactive · Automation Follows Edit > Active · Mirrored MIDI Editing > Inactive · Layered Editing > Inactive