Savio TR-15

Introduction

Thank you for choosing a Savio product! We value your feedback. If our product meets your expectations, please share your opinion on ceneo.pl, social media, or the store's website. We would also be pleased if you showcase our device on the SAVIO Facebook Page. For suggestions on improvement, please write to support@savio.net.pl. Your feedback helps us adapt products to your expectations. It is recommended to read the entire manual before using the device.

Key Features:

• Supported file formats: MP3, WMA, APE, FLAC, WAV
• USB external storage support: up to 64 GB
• Hands-free kit function (built-in microphone): Yes
• Bass boost function: Yes

9. Safety Conditions

• Use the product according to its intended purpose; improper use may damage the product.
• Do not expose the device to moisture, heat, or direct sunlight. Do not use in dusty environments.
• Clean the device only with a dry cloth.
• Independent repairs and modifications will automatically void the warranty and may damage the product.
• Hitting or dropping the product may cause damage.

1. Device Installation

1. Turn on the car radio and set the frequency to a range between 87.6 and 107.9 MHz that has no signal transmission.
2. Plug the SAVIO TR-15 FM transmitter into the cigarette lighter socket.
3. Set the same frequency on the transmitter as selected on the car radio (refer to section 2).
4. Play music from Bluetooth or USB external storage.

* If there is noise during playback, try setting a different frequency.

2. FM Frequency Settings on the Transmitter

1. Press and hold the [Main Knob] for approximately 3 seconds to enter the frequency setting mode. The LED screen will start flashing, indicating you can change the frequency.
2. Set the frequency using the [Main Knob] or the [Previous Track Button] / [Next Track Button].

3. Package Content

• SAVIO TR-15 transmitter
• User manual

4. Product Diagram Description

The Savio TR-15 FM transmitter features the following components:

• 1. USB Port: For playing music from USB storage and for charging devices.
• 2. USB-C Port: For charging the device.
• 3. USB-A Port (18W Quick Charge 3.0): For fast charging compatible devices.
• 4. LED Screen: Displays current frequency, status, and information.
• 5. Microphone: Built-in microphone for hands-free calls.
• 6. [Bass Boost Button]: Press to turn the Bass Boost function on or off.
• 7. [Previous Track Button]: Press to select the previous track or decrease FM frequency.
• 8. [Multi-function Knob/Button]: Controls playback (play/pause), call management (answer/reject/redial), volume adjustment, and FM frequency change.
• 9. [Next Track Button]: Press to select the next track or increase FM frequency.
• 10. Lighter Socket Plug: Connects the device to the car's power outlet.

5. Playing Music via Bluetooth

1. On your transmitting device (e.g., smartphone), enable Bluetooth, search for devices, and select "SAVIO TR-15" from the list. If the transmitter has been previously paired with this device, it will connect automatically.
2. After a successful connection, you will hear a characteristic sound confirming the pairing.
3. The device is now ready for use.

* If the device prompts for a passcode, enter "0000" or "1234".

6. Playing Music via USB External Storage

Insert a USB external storage device (e.g., a pendrive) into the USB port. The device will automatically read and start playing the music.

7. Functional Buttons Description

7.1 [Main Knob] - During FM Frequency Setting:

• Turning the knob to the right increases the FM frequency.
• Turning the knob to the left decreases the FM frequency.

7.2 [Multi-function Knob/Button] - During Music Playback:

• Single press: Pause or resume playback.
• Turning the knob to the right: Increases volume.
• Turning the knob to the left: Decreases volume.

7.3 [Multi-function Knob/Button] - During Incoming Calls (Hands-Free Function):

• Single press: Answer an incoming call.
• Press and hold: Reject an incoming call.
• Double fast press: Connect with the last dialled number.

7.4 [Multi-function Knob/Button] - During Calls (Hands-Free Function):

• Single press: End the current call.
• Press and hold: Activate private mode, switching the call to the smartphone's speaker.

7.5 [Bass Boost Button]:

• Single press: Toggles the Bass Boost function on or off. The screen will display "b1" when active and "b0" when inactive.

7.6 [Previous Track Button] and [Next Track Button]:

• Single press [Previous Track Button]: Selects the previous track.
• Single press [Next Track Button]: Selects the next track.

8. Technical Specification

Warranty

The warranty covers a period of 24 months. Independent repairs and modifications result in automatic loss of the warranty. The warranty card is available for download on our website: www.savio.net.pl/en/service.

Information for Customers and Contractors Regarding Complaints

Pursuant to Article 13 sections 1 and 2 of the General Data Protection Regulation (EU) 2016/679, Elmak Sp. z o.o., with its registered seat at ul. Morgowa 81, 35-323 Rzeszów, is the Administrator of your personal data. For inquiries, contact the Specialist for General Data Protection (SODO) via mail at SODO, Elmak Sp. z o.o., ul. Morgowa 81, 35-323 Rzeszów, email at sodo@elmak.pl, or phone at +48 (17) 854 98 14. Your personal data will be processed to fulfill contracts, in accordance with Article 6(1)(b) of the GDPR, and as required by tax and financial regulations. Data recipients include entities authorized by law and service providers for Elmak Sp. z o.o. Your data will be stored based on the Administrator's legitimate interest. You have the right to access, rectify, delete, or limit processing of your data, and to lodge a complaint with a supervisory body. Providing personal data is voluntary; failure to do so may result in contract refusal or termination. Your data will not be subjected to automated decision-making, including profiling, as per Article 22 sections 1 and 4 of the GDPR.

Information on the Utilization of Electrical and Electronic Equipment

This symbol indicates that electrical appliances should not be discarded with other household waste. Used equipment must be handed over to a local collection point or recycling center. Contact your local authorities for disposal information. Waste electrical equipment may contain hazardous substances (e.g., mercury, lead, cadmium, chromium, phthalates) that can contaminate air, soil, and groundwater, posing risks to health and life. Proper waste collection helps protect the environment by neutralizing hazardous substances and reusing valuable secondary raw materials.

Declaration of Conformity

Elmak Sp. z o.o. hereby declares that the radio equipment type TR-15 complies with Directive 2014/53/UE of April 16, 2014. The full text of the EU Declaration of Conformity is available at: www.savio.net.pl/do-pobrania.