Aldes TO GALVA - D200/200
Galvanized Rigid Ductwork, Aluminum, and Special Ducts
Reference: 11093216
Product Name: TO GALVA - D200/200
The 45° tee allows for the connection of two branches of galvanized ductwork at a 45° angle. TO fittings are recommended over 90° tees in supply air systems, ensuring leak-free installation and minimizing pressure drop at the branch connection.
Product Description
The 45° tee facilitates the connection of two galvanized ductwork branches at a 45° angle. TO fittings are preferred over 90° tees in supply air systems, guaranteeing a leak-free installation with no excessive pressure drop on the branch.
Application Areas
Residential collective housing, New construction, Renovation, Commercial spaces.
Installation
- Easy accessory fitting via push-fit connection: ducts are female, accessories are male.
- Sealing achieved by applying mastic and/or grooved tape.
- Fixing to the duct using self-drilling screws (4 to 6 depending on diameter).
Reference Argument
Application:
- Connection of two duct branches at a 45° angle in tertiary and collective ventilation systems.
- Particularly effective in supply air compared to a 90° tee.
Description
- Oblique tee in galvanized steel, diameter 200/200 mm.
Main Characteristics
- Available for diameters from 80 mm to 900 mm.
- Galvanized steel compliant with standard EN 10346, ensuring coating regularity.
- Fire classification: MO.
Dimensional Data
| Reference | Ø A (mm) | Ø B (mm) |
|---|---|---|
| 11093216 | 200 | 200 |
Dimensional Diagram: The diagram shows an oblique tee with dimensions labeled Ø A and Ø B.
Regulatory Data
| Reference | Fire Classification |
|---|---|
| 11093216 | MO |
