Saramonic - Professional Microphones, Intercom Headsets, and More
User Manual for Saramonic models including: SR-MV2000W Wired Wireless Dual Function Microphone, SR-MV2000W, Wired Wireless Dual Function Microphone, Wireless Dual Function Microphone, Dual Function Microphone, Function Microphone, Microphone
A - Wired Operation 1. Connect the microphone to your smartphone/computer 2. Adjust the knobs according to your needs Direct/Playback Monitoring
File Info : application/pdf, 13 Pages, 1.19MB
DocumentDocumentProduct Structure
TX
Wired/Wireless Dual-Function Microphone /
SR-MV2000W
User Manual
Headphone volume control
Gain/mute control Type-C port 3.5mm headphone jack
Locking knob Smart LED indicator Battery level indicator Power/pair button Mic stand
RX
Functions
3.5mm headphone jack Type-C connector
Volume control (+/-) / Pair button Mono/stereo switch
Power indicator
1. Magnetic Base
5/8'' screw hole
Accessories
Type-C female to USB-A male adapter
USB-A to Type-C cable
3/8'' to 5/8'' screw adapter
Type-C to Type-C cable
It can be mounted to a boom arm (not included)
2. Angle Adjustment
Screw Unscrew
Battery Charging
Indicator
Status Charging (breathing white light) Full charged Current battery level (75% power) Low battery (25% power)
Operation Guide
A - Wired Operation
1. Connect the microphone to your smartphone/computer
Devices
Smartphone
Computer
Connection
Type-C to Type-C cableType-C USB-A to to Lightning cable (not included) Type-C cable
System Requirements
Andriod/iOS devices
Windows 7/10 Mac OS 10.12 or later
Note:
1. SR-MV2000W is also compatible with iOS devices. The Type-C to Lightning adapter cable is not included. Please purchase it separately if needed.
2. For optimum sound, please press and hold the volume control and gain control knobs simultaneously to restore factory setting. The indicator will turn red and blinks three times.
Type-C to Type-C cable
USB-A to Type-C cable
Restore factory setting
2. Adjust the knobs according to your needs
Direct/Playback Monitoring Gain/Mute Control Control Button
Smart LED Indicator Color
MIC (Direct monitoring)
USB (Playback monitoring)
GAIN
MUTE
Operating
Press the button to switch between direct and playback monitoring Turn the knob to adjust the headphone volume.
Press the button to mute/unmute the microphone; Turn the knob to adjust gains for microphone input level.
B - Wireless Operation
1. Turn on the transmitter Note: When using the wired function, short press the power button to enable the wireless function simultaneously.
Press and hold the power button
2. Connect the receiver to an external device
. Connect to a Type-C device
. Connect to a USB-A device
3. TX & RX Pairing TX
Status
Indicator light colour
Unpaired
green light flashes in cycle
Pairing
Paired Successfully
green light flashes rapidly solid green light
Double-click the pair button to enter
pairing mode
RX
Connect a headphone for audio monitoring
Status
Indicator light colour
Unpaired
blue light flashes slowly
Pairing
Paired Successfully
blue light flashes rapidly solid blue light
Press + and - buttons simultaneously to enter pairing mode, TX and RX will be successfully paired within 10s.
Note: If you ever need to use two USB mic in one device, you can simply add a second SR-MV2000W wireless transmitter (sold separately) and make it a 2-person wireless microphone. To add a second SR-MV2000W transmitter, please repeat the above pairing operation.
Specifications
Wired Operation
Mic Capsule Polar Pattern Frequency Response Sensitivity Signal-to-Noise Ratio Maximum SPL Sampling Rate Bit Rate Mic Gain Working Voltage Audio Output Connector Operating Temperature Storage Temperature
14mm Electret Condenser Capsule Cardioid 20Hz-20kHz -36dB (0dB=1V/Pa,1kHz 1Pa) 80dB 120dB 48kHz 16bit/24bit 0~54dB 5V 110mA 3.5mm Headphone Jack, Type-C Port 0°C to 50°C 20°C to +55°C
Wireless Operation
Mic Capsule Polar Pattern Frequency Response Sensitivity Signal-to-Noise Ratio
14mm Electret Condenser Capsule Cardioid 35Hz-18kHz -36dB (0dB=1V/Pa,1kHz 1Pa) 80dB
Maximum SPL Transmission Type Modulation Antenna Operating Range RF Output Power Distortion Battery Life Charging Time Battery Capacity
Dimensions
Weight
120dB 2.4GHz GFSK Dipole Antenna 60m (Outdoors without obstacles) <10mW <0.05% 6 hours 1.5 hours 850mAh TX: 165×78.6×90mm RX: 71.6×27.1×10.55mm
TX: 359g RX: 12.5g
Packing List
SR-MV2000W Microphone×1 Wireless Receiver×1 Type-C Female to USB-A Male Adapter×1 3/8'' to 5/8'' Screw Adapter×1 6.6'(2m) USB-A to Type-C Cable×1 6.6'(2m) Type-C to Type-C Cable×1
Polar Pattern
0°
180°
Frequency Response
F$ 40 0 30 0 20 0 10 0 0 0
-10 0 -20 0 -30 0
Frequency Response0dB=1V/Pa
*\
TX
/ Type-C 3.5mm
LED /
RX
3.5mm
Type-C (+/-) /
/
1.
Type-C USB-A
3/8''5/8''
USB-A Type-C
Type-C Type-C
5/8
2.
(75%) (25%)
A -
1. /
Type-CType-CType-C Lightning
/iOS
USB-A Type-C
Windows 7/10 Mac OS 10.12
1. SR-MV2000W iOS Type-CLightning 2.
Type-C Type-C
) USB-A Type-C
2.
/
/
LED
MIC ()
USB ()
GAIN ( )
MUTE ()
/
B -
1.
2.
. Type-C
. USB-A
3. TX
RX
+- , TXRX 10
SR-MV2000W SR-MV2000WSR-MV2000W
14mm 20Hz-20kHz -36dB0dB=1V/Pa1kHz 1Pa 80dB 120dB 48kHz 16bit/24bit 0~54dB 5V 110mA 3.5mm, Type-C 0°C~50°C 20°C~+55°C
14mm 35Hz-18kHz -36dB0dB=1V/Pa1kHz 1Pa 80dB
120dB
2.4GHz
60 <10mW
<0.05%
6 1.5 850mAh TX165×78.6×90mm RX71.6×27.1×10.55mm TX359g RX12.5g
SR-MV2000W×1 ×1 Type-CUSB-A ×1 3/8'' 5/8''×1 2USB-AType-C×1 2Type-CType-C×1
0°
180°
F$ 40 0 30 0 20 0 10 0 0 0
-10 0 -20 0 -30 0
0dB=1V/Pa
*\
For better recording experience, the application SmartRecorder is recommended. Saramonic SmartRecorder
Scan the QR code and follow us
Shenzhen Jiayz Photo Industrial., Ltd
A16 Building, Intelligent Terminal Industrial Park of Silicon Valley Power, Guanlan, Longhua District, Shenzhen, China A16
400-613-1096
www.saramonic.com
info@saramonic.com