STERWINS POC-3 PRESSURE SWITCH
This document provides instructions for the Sterwins POC-3 Pressure Switch.
Intended Use
The Sterwins POC-3 pressure switch is primarily designed for domestic water supply and irrigation systems. It is a mechanical controller that automatically starts and stops a water pump when a tap or valve in the system is opened or closed. It is not intended for use by children or persons with reduced physical, mental, or sensory capabilities, nor for commercial, trade, or industrial applications.
The device can control the on/off operation of multiple pumps. Its function is based on pressure changes in the plumbing system. When the pressure reaches a pre-set upper limit, the switch cuts off power and stops the pump. When the pressure reaches a pre-set lower limit, the switch reconnects power and starts the pump, thus completing the automatic control process.
Purpose of control: Pressure sensing
Construction of control: Incorporated control, non-electronic control
Pressure medium: Water
Action type: Type 1.A
Control pollution degree: 2
Technical Data
- Rated voltage: 250V~
- Max. current: 16(8)A
- Frequency: 50Hz
- Max. temperature: 55°C
- Connector size: G1/4"
- Min. cut-out: 1 bar
- Max. cut-out: 5.5 bar
- Preset pressure: 1.4-2.8 bar
- Operation differential: 1.4 bar
- Maximum work pressure: 5 bar
Installation
During installation, the pressure switch must be mounted tightly to the pump to prevent water leakage. Failure to do so may cause the pump to start too frequently, potentially damaging the motor.
Ensure all electrical cable insulation clips are securely fastened to prevent cable damage.
Cable Connection
Diagram illustrating cable connection:
[Diagram showing L1, L2, and M terminals for electrical connection]
Symbols
The manual includes various symbols to indicate important information:
- Read the manual: Symbol indicating the need to carefully read the user manual.
- CE Marking: Indicates compliance with European standards and directives.
- EAC Marking: Signifies conformity for products circulating in the Customs Union market.
- Ukrainian Conformity Marking: Indicates compliance with Ukrainian standards.
- Recycling Symbol (crossed-out bin): Electrical products should not be disposed of with household waste. They must be collected separately for proper disposal and recycling.
- Green Dot: Indicates that the packaging is recyclable.
Disposal and Recycling
This product should not be disposed of with household waste within the EU. To prevent potential harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. Return used devices to designated collection systems or contact the retailer where the product was purchased for proper recycling.
Guarantee
Sterwins products are designed to high DIY quality standards and come with a 24-month warranty from the date of purchase, covering material and manufacturing defects. The warranty does not cover claims for indirect damages or issues arising from misuse, wear and tear, unauthorized repairs, external damage, or failure to follow safety and operating instructions.
To make a warranty claim, proof of purchase is required, and the product must not have been tampered with or misused. Repairs or part replacements do not extend the original warranty period.
Faulty products should be returned to Sterwins via your dealer, properly packaged. If sent directly by the consumer, shipping costs must be covered by the consumer. Products delivered in inadequate packaging will not be accepted.
Contact Information
Manufacturer: Wenling Huanli Electric Co., Ltd.
Address: 2 Nanxuan Industrial Zone, Wenling City, Zhejiang, 317500, China
Importer/Distributor (Russia): OOO "Leroy Merlin Vostok"
Address: 141031, Moscow region, Mytishchi, Ostashkovskoe shosse, d.1, RF
EAN CODE: 3276005712201
ATLAS CODE: 931334