Milesight IoT Cloud
Ursalink Technology - We Connect Things to Cloud
for URSALINK models including: URSALINK, LoRaWAN Gateway, UG87
This Quick Start Guide only explains the installation of Ursalink
Ursalink UG87 Outdoor Industrial LoRaWAN Gateway
File Info : application/pdf, 31 Pages, 6.48MB
DocumentDocumentUG87 LoRaWAN Gateway Quick Start Guide Ursalink Technology Co., Ltd. 1 Welcome Thank you for choosing Ursalink UG87 LoRaWAN Gateway. This guide teaches you how to install the UG87 and how to log in the web GUI to configure the device. Once you complete the installation, refer to the Ursalink UG87 User Guide for instructions on how to perform configurations on the device. Related Documents This Quick Start Guide only explains the installation of Ursalink UG87 LoRaWAN Gateway. For more functionality and advanced settings, please refer to the relevant documents as below. Document Description Ursalink UG87 Datasheet Datasheet for the Ursalink UG87 LoRaWAN Gateway. Ursalink UG87 User Guide Users can refer to the guide for instruction on how to log in the web GUI, and how to configure all the settings. The related documents are available on Ursalink website: http://www.ursalink.com. Declaration of Conformity UG87 is in conformity with the essential requirements and other relevant provisions of the CE, FCC, and RoHS. For assistance, please contact Ursalink technical support: Email: support@ursalink.com Tel: 86-592-5023060 Fax: 86-592-5023065 www.ursalink.com 1 Ursalink UG87 Quick Start Guide Revision History Date Sept. 9, 2019 Oct. 18, 2019 Doc Version V1.1 V1.2 Nov. 29, 2019 V1.3 Apr. 4, 2020 V1.4 Description Initial version 1. Add 16 channels description; 2. Change antenna location. Delete AC/DC power supply, add PoE injector 1. Reset button definition change; 2. Add back AC/DC power supply; 3. Default IP change from 192.168.1.1 to 192.168.23.150; 4. Web GUI interface change (based on 80.0.0.62); 5. Add bulk import LoRaWAN devices. www.ursalink.com 2 Ursalink UG87 Quick Start Guide Contents 1. Packing List....................................................................................................................................................... 4 2. Hardware Introduction.....................................................................................................................................5 2.1 Overview................................................................................................................................................ 5 2.2 Dimensions.............................................................................................................................................6 2.3 LED Indicators.........................................................................................................................................6 2.4 Reset Button...........................................................................................................................................7 2.5 Ethernet Port Indicator.......................................................................................................................... 7 3. Hardware Installation.......................................................................................................................................8 3.1 SIM Card Installation.............................................................................................................................. 8 3.2 Antenna Installation...............................................................................................................................8 3.3 Power Supply..........................................................................................................................................9 3.3.1 PoE Power Supply........................................................................................................................9 3.3.1.1 Connect UG87 to PoE Switch........................................................................................... 9 3.3.1.2 Connect UG87 to PoE Injector......................................................................................... 9 3.3.2 AC/DC Power Supply (Optional)................................................................................................10 3.4 Mount Gateway................................................................................................................................... 11 3.4.1 Wall Mounting...........................................................................................................................11 3.4.2 Pole Mounting ( Hose clamp)....................................................................................................12 3.4.3 Pole Mounting (U-bolt)............................................................................................................. 13 4.Access the Web GUI of UG87..........................................................................................................................14 4.1 PC Configuration.................................................................................................................................. 14 4.2 Log in the Web GUI of UG87................................................................................................................ 15 5.Connect UG87 to the Netowork..................................................................................................................... 17 5.1 Configure the WAN Connection...........................................................................................................17 5.2 Configure the Cellular Connection.......................................................................................................17 5.3 Configure the Wi-Fi Connection...........................................................................................................19 6.Packet Forwarder Configuration..................................................................................................................... 22 7.Network Server Configuration........................................................................................................................ 24 7.1 Connect UG87 to Ursalink Cloud......................................................................................................... 24 7.2 Connect UG87 to Other Platform........................................................................................................ 25 www.ursalink.com 3 Ursalink UG87 Quick Start Guide 1. Packing List Before you begin to install the UG87 LoRaWAN Gateway, please check the package contents to verify that you have received the items below. 1 × UG87 1 × Cellular Antenna 1 × LoRa Antenna (2 × LoRa Antennas for 16-channel model) 1 × GPS Antenna 1 × WiFi Antenna (WiFi Version Only) 1 × Wall Mounting Kit 2 × Pole Mounting Kit Screws 1 × Warranty Card 1 × PoE Injector Optional Installation Accessories 1 × Power cable (AC/ DC Version Only) 1 × Ethernet Cable (Optional) + + 1 × Pole Mount A + 2 × U-Bolt 1 × Pole Mount B + 2 × U-Bolt Screws If any of the above items is missing or damaged, please contact your Ursalink sales representative. www.ursalink.com 4 2. Hardware Introduction 2.1 Overview A. Front Panel B. Rear Panel C. Top & Bottom View Ursalink UG87 Quick Start Guide 1 LoRa2 Antenna (only for 16-channel model) 2 GPS Antenna 3 LTE Antenna 4 LoRa1 Antenna 5 Vent Plug 6 Power Connector 7 Ethernet Port (PoE) 8 LED&SIM Area 9 Wi-Fi Antenna LED&SIM Area 10 PWR: Power Indicator 11 SYS: System Indicator 12 SIM Card Slot 13 L2: Cellular Indicator 14 RST: Reset Button 15 L1: LoRa Indicator www.ursalink.com 5 2.2 Dimensions (mm) Ursalink UG87 Quick Start Guide 2.3 LED Indicators LED Indication PWR Power Status SYS System Status L1 LoRa Status L2 SIM Card Status Status On Off Green Light Off Green Light Off Off Green Light Orange Light Description The power is switched on The power is switched off Static: Start-up Blinking slowly: the system is running properly The system goes wrong Package Forwarder mode is running well. Package Forwarder mode is running off. SIM1 or SIM2 is registering or fails to register (or there are no SIM cards inserted) Blink Slowly: SIM1 has been registered and is ready for dial-up Blink Rapidly: SIM1 has been registered and is dialing up now Static: SIM1 or SIM2 has been registered and dialed up successfully Blink Slowly: SIM2 has been registered and is ready for dial-up Blink Rapidly: SIM2 has been registered and is dialing up now Static: SIM2 has been registered and dialed up successfully www.ursalink.com 6 Ursalink UG87 Quick Start Guide 2.4 Reset Button Function Reset Description SYS LED Blinking Static Green Rapidly Blinking Off Blinking Action Press and hold the reset button for more than 5 seconds. Release the button and wait. The gateway resets to factory default. 2.5 Ethernet Port Indicator Indicator Link Indicator (Orange) Rate Indicator (Green) Status On Blinking Off On Off Description Connected Transmitting data Disconnected 1000 Mbps mode 100 Mbps mode www.ursalink.com 7 Ursalink UG87 Quick Start Guide 3. Hardware Installation Environmental Requirements - Power Input: PoE (IEEE 802.3af standard) (Option: 100-240 VAC/9-48VDC) - Power Consumption: Typical 4.9 W, Max 6.5 W (8 channels) Typical 6 W, Max 8.2 W (16 channels) - Ingress Protection: IP67 - Operating Temperature: -40°C to 70°C (-40°F -158°F) - Relative Humidity: 0% to 95% (non-condensing) at 25°C/77°F 3.1 SIM Card Installation Remove the cover of the SIM card slot with a wrench and insert the SIM card. Note: Check the triangle icon of the SIM card slot. 3.2 Antenna Installation A. Remove the protective caps from the antenna connectors. B. Connect the antenna to the corresponding antenna connector by holding the metal part of the antenna and rotating it clockwise. Note: Each antenna is labeled as cellular, GPS, WLAN or LoRa. www.ursalink.com 8 Ursalink UG87 Quick Start Guide 3.3 Power Supply 3.3.1 PoE Power Supply Ethernet cable of UG87 device side should be installed first, or PoE devices or gateway may be damaged. 3.3.1.1 Connect UG87 to PoE Switch Connect UG87 Ethernet port to a PoE switch via Ethernet cable. PoE switch must meet IEEE 802.3 af standard. 3.3.1.2 Connect UG87 to PoE Injector Connect UG87 Ethernet port to a PoE injector via Ethernet cable. PoE injector must meet IEEE 802.3 af standard. www.ursalink.com 9 Ursalink UG87 Quick Start Guide 3.3.2 AC/DC Power Supply (Optional) A. Locate the power port marked POWER on the left side of the enclosure and remove the protective cap to find the connection pins. B. Connect a power supply cable to the power port, and rotate it clockwise. Type PIN 1 VAC 2 3 Color Brown Black Blue Description L (VIN+) GND N (VIN-) Type PIN VDC 1 2 Color Brown Black Description V+ GND www.ursalink.com 10 Ursalink UG87 Quick Start Guide 3.4 Mount Gateway The gateway can be mounted to a wall or a pole. 3.4.1 Wall Mounting Make sure you have mounting bracket, bracket mounting screws, wall plugs, wall mounting screws and other required tools. 1. Before you start, make sure that your SIM card has been inserted, your antennas have been attached and that all cables have been disconnected from your enclosure. 2. Mount the enclosure to the mounting bracket with the bracket mounting screws. 3. Align the mounting bracket horizontally to the desired position on the wall, use a marker pen to mark four mounting holes on the wall, and then remove the mounting bracket from the wall. Note: The connecting lines of adjacent points are at right angles. 4. Drill four holes with a depth of 32 mm by using your drill with a 6 mm drill bit on the positions you marked previously on the wall. 5. Insert four wall plugs into the holes respectively. 6. Mount the mounting bracket horizontally to the wall by fixing the wall mounting screws into the wall plugs. Note: Place the power port on the button when installing. 7. Reconnect the cables. www.ursalink.com 11 Ursalink UG87 Quick Start Guide 3.4.2 Pole Mounting ( Hose clamp) Make sure you have mounting bracket, bracket mounting screws, hose clamp and other required tools. 1. Before you start, make sure that your SIM card has been inserted, your antennas have been attached and that all cables have been disconnected from your enclosure. 2. Mount the enclosure to the mounting bracket with the bracket mounting screws. 3.Loosen the hose clamp by turning the locking mechanism counter-clockwise. 4.Straighten out the hose clamp and slide it through the rectangular holes in the mounting bracket, wrap the hose clamp around the pole. 5.Use a screwdriver to tighten the locking mechanism by turning it clockwise. 6.Reconnect the cables. www.ursalink.com 12 Ursalink UG87 Quick Start Guide 3.4.3 Pole Mounting (U-bolt) Note: Pole mounting (U-bolt) is optional. Make sure you have mounting bracket, bracket mounting screws, hose clamp and other required tools. 1. Before you start, make sure your SIM card has been inserted, your antennas have been attached and that all cables have been disconnected from your enclosure. 2. Mount the enclosure to the mounting bracket with the bracket mounting screws. 3. Wrap the U-bolt around the pole and mount the bracket with the mounting screws. 4. Reconnect the cables. www.ursalink.com 13 Ursalink UG87 Quick Start Guide 4.Access the Web GUI of UG87 Ursalink UG87 provides web-based configuration interface for management. If this is the first time you configure the gateway, please use the default settings below: IP Address: 192.168.23.150 Username: admin Password: password 4.1 PC Configuration Please connect PC to Ethernet port of UG87 directly and configure a static IP address manually. The following steps are based on Windows 10 operating system for your reference. Click "Search Box" to search "Control Panel" on the Windows 10 taskbar. Click "Control Panel" to open it, and then click "View network status and tasks". Click "Ethernet" (May have different names). Click "Properties". www.ursalink.com 14 Ursalink UG87 Quick Start Guide Double Click "Internet Protocol Version 4 (TCP/IPv4)" to configure IP address and DNS server. Click "Use the following IP address" to assign a static IP manually within the same subnet of the gateway. (Note: Remember to click "OK" to finish configuration.) 4.2 Log in the Web GUI of UG87 A. Open a Web browser on your PC (Chrome and IE are recommended), type in the IP address, and press Enter on your keyboard. B. Enter the username and password, click "Login". If you enter the username or password incorrectly more than 5 times, the login page will be locked for 10 minutes. C. When you log in with the default username and password, you will be asked to change password. It's suggested that you change the password for the sake of security. Click "Cancel" button if you want to modify it later. www.ursalink.com 15 Ursalink UG87 Quick Start Guide D. After you log in the Web GUI, you can view system information and perform configuration of the gateway. www.ursalink.com 16 Ursalink UG87 Quick Start Guide 5.Connect UG87 to the Netowork This chapter explains how to connect the gateway to network via WAN connection, cellular or Wi-Fi. 5.1 Configure the WAN Connection A. Go to "Network" "Interface" "Port" page to select the connection type and configure WAN information. B. Click "Save&Apply" for configuration to take effect. C. Connect Ethernet port of gateway to network devices like router or modem. D. Log in the web GUI via the newly assigned IP address and go to "Status" "Network" to check Ethernet port status. 5.2 Configure the Cellular Connection Take inserting SIM card into SIM1 slot as an example; please refer to the following detailed operations. A. Go to "Network" "Interface" "Cellular" "Cellular Setting" page to configure the cellular info. www.ursalink.com 17 Ursalink UG87 Quick Start Guide B. Enable SIM1. C. Choose relevant network type. "Auto", "4G Only", "3G Only" and "2G Only" are optional. D. Click "Save" and "Apply" for configuration to take effect. www.ursalink.com 18 Ursalink UG87 Quick Start Guide UG87 has two cellular interfaces named SIM1 & SIM2. Only one cellular interface is active at one time. If both cellular interfaces are enabled, SIM1 interface takes precedence by default. E. Go to "Status" "Cellular" page to view the status of the cellular connection. If it shows "Connected", it means SIM1 has dialed up successfully. On the other hand, you can check the status of L2 indicator. If it keeps on green light statically, it means SIM has dialed up successfully. 5.3 Configure the Wi-Fi Connection A. Go to "Network" "Interface" "WLAN" and select "Client" mode. B. Click "Scan" to search for Wi-Fi access point. Select the available one and click "Join Network". www.ursalink.com 19 Ursalink UG87 Quick Start Guide C. Type the correct key of Wi-Fi. D. Go to "Status""WLAN" to check Wi-Fi status. If it shows "Connected", it means gateway connects to Wi-Fi successfully. www.ursalink.com 20 Ursalink UG87 Quick Start Guide www.ursalink.com 21 Ursalink UG87 Quick Start Guide 6.Packet Forwarder Configuration UG87 has embedded multiple packet forwarders like TTN, Loriot and chirpstack. This chapter explains how to connect the gateway to third-party network servers. Make sure the gateway connects to the network as shown in Chapter 5. A. Go to "Packet Forwarder" "General" page and click to add a network server. B. Fill in the server information and enable this server. NoteWhen you select one of TTN, Loriot or chirpstack, other servers are not allow to enable. C. Go to "Radios" page to configure the center frequency and channels. Note: the channel plan of the gateway and network server need to be the same. www.ursalink.com 22 Ursalink UG87 Quick Start Guide D. Add the gateway in network server page. Take TTN for example, type and save the gateway EUI and other information when you connect via Semtech packet forwarder. After you add the gateway, TTN will show connection status. E. Go to "Traffic" page to view the data communication of UG87. www.ursalink.com 23 Ursalink UG87 Quick Start Guide 7.Network Server Configuration UG87 can work as network server and transmit data to Ursalink Cloud or other platform via MQTT/HTTP/HTTPS. Make sure the gateway connects to the network as shown in Chapter 5. 7.1 Connect UG87 to Ursalink Cloud A. Go to "Packet Forwarder" "General" page to enable the "Ursalink" type server. Note: the channel plan of the gateway and network server need to be the same. B. Go to "Network Server" "General" page to enable the network server and Ursalink Cloud mode. C. Register and log in the Ursalink Cloud (cloud.ursalink.com). www.ursalink.com 24 Ursalink UG87 Quick Start Guide D. Go to "Gateway" page and click "Add" to add a gateway. E. The gateway is online on Ursalink Cloud. 7.2 Connect UG87 to Other Platform A. Go to "Packet Forwarder" "General" page to enable the "Ursalink" type server. www.ursalink.com 25 Ursalink UG87 Quick Start Guide A. Go to "Radios" page to configure the center frequency and channels. Note: the channel plan of the nodes and gateway need to be the same. B. Go to "Network Server" "General" page to enable the network server mode. www.ursalink.com 26 Ursalink UG87 Quick Start Guide C. Go to "Network Server""Application" to add a new application. After saving the application, select HTTP, HTTPS or MQTT protocol and fill in correspond server information to send data to another server. www.ursalink.com 27 D. Go to "Profiles" page to add a new profile for the device. Ursalink UG87 Quick Start Guide E. Go to "Device" page and click "Add" to add LoRaWAN node devices. www.ursalink.com 28 Ursalink UG87 Quick Start Guide You can also click "Bulk Import" if many LoRaWAN nodes need to add. Click "Template Download" to download template file and add LoRaWAN device information to this file. Application and device profile should be the same as you created in web page. Import this file to add bulks of devices. F. Go to "Packets" page to check the packets from LoRaWAN node devices. The type starts from "Up" means uplinks and "Dn" means downlinks. Click "Details" to check the properties and payload contents of packets. www.ursalink.com 29 Ursalink UG87 Quick Start Guide [END] www.ursalink.com 30