LED Ceiling Fan Installation Manual & Remote Instructions

Product Specifications

• Voltage: 220-240V
• Current: 50/60 Hz
• Protection grade: IP20, indoor use only
• Watt: 43 watt
• Lumen: 1500 lumen
• Dimension: Ø50 x H16 cm
• Controller: Remote control or TUYA app

Installation Steps

1. Switch off electricity.
2. Mount the ceiling plate.
3. Connect the wires.
4. Install fan on ceiling plate.
5. Switch on electricity.
6. Control with remote or app.

Remote Control Functions

• Light ON/OFF
• Night light
• Color temperature -
• Brightness -
• Timer fan (1H, 2H, 4H)
• Adjusting rotation direction
• Fan ON/OFF
• RGB
• Brightness +
• Color temperature +
• Quickly change color temperature
• Speed fan

Brightness: Long press: gradually min/max. Short press: min/max individual stages.

Color temperature: Long press: gradually min/max. Short press: min/max individual stages.

Quickly change color temperature: 1 x press to quickly change between 2700K (warm white), 3500K (bright white) and 5000K (cold white).

TUYA App Instructions

Step 1: Download and install the Tuya app

1. Turn on the bulb while ensuring that your phone is connected to the 2.4 GHz Wi-Fi network.

2. Use your phone to scan the QR code below or search 'Tuya Smart' in the App Store to download and install the app.

Step 2: Register or log into your account

If you don't have a Tuya account yet, you can register a new account. Follow the steps below:

• Click on 'Register'.
• Select your country and fill in your email address. Accept terms and conditions.
• You will receive a verification code. Fill in this code and create a password. Tap 'Confirm' to finish your registration.
• You can now log in with your email address and chosen password.

Step 3: Add your device

To add the smart bulb to your device, click on 'Add device' or on the '+' in the right corner of the screen. The app will start looking for devices itself (see step 4) or you can add it manually from the list.

Step 4: Put your smart lamp in discovery mode

Turn your smart bulb on and off for three times in a row (on-off-on-off-on). Ensure that your smart bulb is flashing/blinking quickly (twice a second), which indicates that the device is in configuration. The smart bulb is now ready to be connected to the Tuya app. Click the 'Confirm light blinks rapidly' button on the page to start the configuration.

Step 5: Access settings

After setting up successfully, you can now see your smart bulb on the 'Devices' page. You can also give the smart bulbs a name, for example 'Kitchen lamp' or 'Big lamp'.

Step 6: Control devices

1. Open the light control page. If it is off, only the 'Schedule' function will be displayed. If the light is on, the complete function will be displayed at the bottom.
2. Click on 'White' to manually adjust the brightness and color temperature.
3. Click on 'Color' to manually select a color.
4. Click on 'Scene', you can choose the lighting mode under different scenes.

Step 7: Profile

You are now able to adjust the settings and manage the timer setting with the Tuya app. You can control the Tuya app with your voice or through the screen. For all possibilities of the app, consult the FAQ menu.

Safety Guidelines

• Disposal: The product is designated for separate collection at an appropriate collection point. Do not dispose of the product with household waste.
• Care: Before cleaning, disconnect from power. Do not use aggressive cleaning agents.
• Warranty: Contact the retailer with proof of purchase for any defects.
• General Safety: Read manual carefully. Use only for intended purposes. Do not use if damaged. Do not modify. Keep away from water/moisture (IP20). Do not immerse in water (IP44-IP66). Keep away from heat sources. Do not block ventilation. Do not look directly into LED. Maintain minimum distance of >2 meters from illuminated surface.
• Electrical Safety: Product should only be opened by authorized technicians for service. Do not use if cable or plug is damaged. Ensure voltage matches rating plate.
• Warning: Light source replacement by manufacturer or qualified agent only. Caution, risk of electric shock. External flexible cable cannot be replaced; if damaged, luminaire must be destroyed. Not a toy; keep out of reach of children.
• Disclaimer: Technical modifications reserved. Not liable for damage from incorrect handling or use.
• Documentation: Product complies with EU regulations. Declaration of conformity available upon request.
• CE Declaration: Complies with LVD (2014/35/EU), EMC (2014/30/EU), RoHS (2011/65/EU), and RED (2014/53/EU) for radio transmitter units.

Importer Information

Imported by Lumen Import B.V., Postbus 15980, 1001 NL Amsterdam, the Netherlands. Made in China.